Its superior materials and precise construction bring clarity and warmth to your sound, making it an essential component for any high-fidelity setup. Convenient Mounting: Features mounting holes with a center distance of 70mm for easy installation.
Item Category: Vintage Electronics
-
Tango U-608 output transformer for single-ended tube amplifiers 6W universal
One pair of Tango U-608. One is an NOS. I have alternatives for you. tested continuity, good.
-
SMC Single Ended SE Tube Output Tranformers Pair 10K Primary 20mA DC – 600 Ohms
Primary Impedance is 10K, Maximum DC in Primary is 20mA. They are removed from the Collins Military R-390 / A units and are in good working condition. Secondary Output Impedance is 600Ohms. Part Number # 283275 / TF1RX21YY.
-
Noguchi FM-3WSL Finemet Core Single End Output Transformers – (Tango Tamura)
New in box Primary: 3.5K or 2.5K Finemet core I also have FM-3WS and FM-6WS-H available.
-
Electra-Print Solid Silver Secondary, Single Ended Output Transformers
These are wound to accommodate many popular plate loads. 4K to 7K primary and 6 ohm secondary of 2.6oz 99 % solid silver for 4 and 8 ohm load. plate current max (Idle 35-40ma) and up to 10 plus watts, 20 watts capable.
-
CS40 CUT CORE OUTPUT TRANSFORMER SINGLE-ENDED 5K OHM: 4-8-16 OHM (2PCS)
・Specifications: 5k Ohm: 4-8-16 Ohm. ・Sold as a pair (2 pieces). This item is an open box. We will respond within 48 hours. • As liquids are difficult to export, ink will not be included with pens, etc.
-
OT10SE HC87 Single Ended Output Transformer 12VA 5K,7Kohm:4/8/16 60mA
We are using an oversized 7/8 x 1″ stack of audio grade 29M6 laminations and bobbin wound construction. It’s a 2×1 interleaved winding with two input impedances and three output impedances. This is the standard OT10SE design, except mounted into Bahr’s HC-87 upright horizontal end bells for a fully shielded construction.
-
OT10SE Single Ended Output Transformer 12VA 5K,7Kohm:4/8/16 60mA
I’m using an oversized gapped stack of audio grade 29M6 laminations and bobbin wound construction. It’s a 2×1 interleaved winding with two input impedences and three output impedences. You can readily run this as a 2500 or 3500 Ohm input to 2/4/8 Ohms output if you need to operate at lower impedences.