Item Category: Vintage Electronics

  • Mitsubishi DA-U310 Stereo Integrated Amplifier – Vintage Silverface Classic

    Mitsubishi DA-U310 stereo integrated amplifier from the late 1970s/early 1980s. • Tape Monitor (2 decks). Specifications (typical for this model) • Low THD: 0.03%. • Frequency response: 20Hz – 60kHz.

  • Mitsubishi M-A4200 Stereo Power Amplifier

    Tested and works. Please see the pictures.

  • Vintage Mitsubishi DA-U156 Stereo Integrated Amplifier With Manual 120v Black

    Vintage Mitsubishi DA-U156 Stereo Integrated Amplifier With Manual 120v Black check my other listing for other Mitsubishi electronics

  • Mitsubishi M-A4200 Stereo Power Amplifier Amp 100 Watts – TESTED – EB-19244

    The face is clean with a couple scuff marks, all buttons are clean and work as intended and all of the illumination works.

  • SAE 2200 Amplifier Restoration Kit repair service fix recap filter capacitor

    This listing is for 1 x FULL kit for SAE 2200 . ———- The scarcity of good, honest techs who can do good and reasonably priced restoration/rebuild of audio equipment made me start offering this restoration kit.In today’s day and age it is very hard to come by a knowledgeable tech who can service your audio gear well. I have seen many poor quality restorations of equipment that cost way too much to its owners.In 99% of the cases there were only few parts replaced, instead of a full and proper restoration job. On the other hand, if one succeeds in finding a good tech, a wait time is usually 6-12 months for the unit to be serviced and costs is sky-high!!! In this kit I offer parts and instructions for a full/complete restoration of your audio equipment. I have been servicing audio equipment for many years and have developed deep respect toward all good equipment. I really do think they sound amazing if properly restored. I have seen many bad quality restorations/fix jobs done to these units that made them sound cheap and very low quality. Knowing how amazing and warm these units can sound, I have decided to develop this kit to help you do a great job on your equipment. It includes very good upgrades and improvements that MUST be done to the unit. Please do your audio equipment a favor and replace the most important components that are most likely 90% dead. Power / Filter stage caps are those large silver cans mounted on top of the chassis and sometimes underneath. This restoration pack will make a huge difference in the sound quality. All the parts are of high quality Japanese Nichicon / Panasonic / IC / United Chemi capacitors. I am extremely particular about the quality of the parts provided with this kit. Knowing how many bogus/fake caps, diodes, resistors etc. out there, I source all the parts from reputable whole-sellers and buy them in bulk. The knowledge that I am going to share with you have been acquired by me over many years serving audio equipment. Please be patient and let’s get your little birdy sing again. “They Shall Have Music” Avery Fisher Included in this kit: 1. Power/Filter stage capacitors (Nichicon / Panasonic / United Chemi) electrolytic capacitors. 2. Detailed instruction with colorful images, schematics, manuals (all of these are in electronic form, I consider these much better than printed version due to zoom availability). 3. Schematics 4. Complete audio path upgrade with high quality US made (IC) or Panasonic audio grade film capacitors. 5. Parts for compete recap of all the electrolytic capacitors. 6. Complete recap of all PCBs. 7. Some other small electrolytic capacitors. 8. fuse/s 9. Instructions on how to clean the chassis. 10. Instructions on how to clean a faceplate 11. Instructions on how to polish knob covers. 12. Support/help to a reasonable extend in case you need it. (This is what makes us different from other sellers.) Also available NEW production volume control ———–> LINK We may also be interested in purchasing your equipment.F

  • SAE MARK FOUR B AMPLIFIER WITH MARK ONE PREAMPLIFIER STEREO SYSTEM NICE

    SAE MARK FOUR B AMPLIFIER WITH MARK ONE PREAMPLIFIER STEREO SYSTEM. USED. STANDARD SHIP/ ADULT SIGN. These units have been serviced/all inputs tested. This is a great SAE stereo system. These units have some cosmetic wear but overall present and perform well. The preamp is missing one knob, but at one point came from Audio Classics which is neat. This is a great sounding system. Fast forward to 1975 and the S.A.E. Mark One preamp. With its step attenuator, discreat capacitor array, separate 2 channel EQ settings, output gain selectors & input for (2) turntables, the Mark One became “the preamp of choice” for the well-heeled 70s audiophile set. S.A.E. MARK IVB STEREO POWER AMPLIFIER Manufactured between 1972-73 (msrp $350). This was part of the first line of S.A.E. components ever offered.60 watts per channel at 8 ohms with independent channel controls. Pro packaged, insured and includes tracking. No PO Boxes. No accessories. Thanks.

  • SAE A501 Amplifier Restoration Kit repair service fix recap filter capacitor

    The scarcity of good, honest techs who can do good and reasonably priced restoration/rebuild of audio equipment inspired me to create this restoration kit. In today’s day and age, it is difficult to find a knowledgeable technician who can service your audio gear properly. I have seen many poor quality restorations of equipment that cost way too much for their owners. In 99% of the cases, only a few parts were replaced, instead of a full and proper restoration job.A proper restoration must replace all electrolytic capacitors on all boards. Do not fall for partial kits that restore just one PCB (power supply, power amp, etc.). This is not a good or proper way to restore your audio equipment. It is the same as with car tires; one should never replace just one tire and keep the other worn-out tires on. A proper rebuild requires a full recap of all PCBs.On the other hand, if one succeeds in finding a good tech, the wait time is usually 6-12 months for the unit to be serviced, and costs are sky-high. I have been servicing audio equipment for many years and have developed deep respect for all good equipment. Knowing how amazing and warm these units can sound, I decided to put together this kit. It includes very good upgrades and improvements that must be done to the unit. This restoration kit will make a huge difference in the sound quality. All the parts are of high-quality Japanese Nichicon / Rubycon / IC / United Chemi capacitors.I am extremely particular about the quality of the parts provided in this kit. Knowing how many bogus/fake caps, diodes, resistors, etc. are out there, I source all the parts from reputable wholesalers and buy them in bulk. Vintage audio equipment has the potential to deliver rich and authentic sound when it is properly restored. Not only can it enhance your listening experience, but it can also evoke memories and bring joy to your life. Let’s work together to bring your vintage gear back to its full potential, and make sure you have the music you deserve. ♩♬♫♪♫♩♬ “They Shall Have Music”- Avery FisherIncluded in this kit: 1. skip 2. Detailed instruction with colorful images, schematics, manuals (all of these are in electronic form, I consider these much better than printed version due to zoom availability). 3. Schematics 4. Complete audio path upgrade with high quality US made (IC) or Panasonic audio grade film capacitors. 5. Parts for compete recap of all the electrolytic capacitors. 6. Complete recap of all PCBs. 7. Transistors (PNP, NPN). 8. fuse/s 9. Instructions on how to clean the chassis. 10. Instructions on how to clean a faceplate 11. Instructions on how to polish knob covers. 12. Support/help to a reasonable extend in case you need it. (This is what makes us different from other sellers.) We also offer a great selection of restoration kits, LED conversion kits, volume controls,switches and other rare and unique parts; Make sure to check it here ———–> LINK (Use the search bar inside the shop to find what you need faster)We may also be interested in purchasing your equipment

  • 1977 SAE Mark XXXIB (31B) Power Amplifier *Parts/Restore*

    Only tested to power on. Signal to noise ratio: 100dB. Power output: 50 watts per channel into 8Ω (stereo). Semiconductors: 20 x transistors, 12 x diodes. Speaker load impedance: 4Ω (minimum). Frequency response: 1Hz to 100kHz.