Use with VM changers with base mounted four pin plastic housing. This is a power cord assembly only. Turntables part of a radio-phonograph combo or console may require a wire at pin 2. Check the last picture for the power socket.
Item Tag: 1229
-
Dual 1229 1219 and 1229Q Bearing Joint Platter Support and Cam Wheel Assembly
This is one of a bunch of 1229 parts I have available from a table that is getting parted. It will also fit a 1219 and 1229Q table. This is the bearing support and cam wheel assembly as pulled whole from the table and in good working order.
-
NEW Dual turntable idler wheel for all 10xx/12xx series except 1219/1229/1229…
NEW Dual turntable idler wheel for all 10xx/12xx series except 1219/1229/1229Q – Made In Canada Precision Idler Wheels for Audio Turntables Brand New Drop-in replacement idler wheel for ALL DUALS 10xx and 12xx (small platter such as 1009, 1019, ) series using OEM part numbers 207497, 210104, 212117 and 217888. Pictures show both models of idler wheels it replaces i.e. the short base 12xx series (1209, 1210, ) as well as the longer base 10xx series (1009, 1019, ) thanks to the supplied 12xx->10xx conversion sleeve. NOT for Dual 1219/1229/1229Q turntables which we offer in a different listing. SPECIFICATIONS Meets or exceeds OEM specification. Micron level tolerances provided by aerospace grade manufacturing equipment to ensure system concentricity and precision. Precision ground soft rubber tire made specifically for AudioVault for reduced vibration and rumble. Graphite filled custom made thrust washers with solid lubricant properties for extreme low friction and high wear resistance offering a smooth and quiet operation. SAE 841 oil impregnated sintered bronze bushing for low noise even in dry conditions. Drop-in replacement; simply remove the old idler wheel and replace with this one. Made In Canada Kit Includes: 1x Precision CNC machined aircraft grade 6061-T651 aluminium idler wheel. 1x pre-installed rubber tire. 2x graphite filled thrust washers. 1x 12xx to 10xx series conversion sleeve. 1x wheel retainer. 1x very soft lint free microfiber cleaning cloth. Compatibility 10xx series1009, 1009F, 1009SK, 1009SK2, 1010, 1010A, 1010F, 1010S, 1011, 1012, 1014, 1015, 1015F, 1016, 1019, 1019SK 12xx series (small platter)1209, 1210, 1211, 1212, 1214, 1215, 1215S, 1216, 1218, 1225, 1226, 1228 Shipping COMBINED Shipping: No extra fees on multiple items; you need to select same shipping service to all items during checkout. International Sales Any taxes and duties imposed by the destination country are not included and are at the buyer’s expense.
-
Dual 1229Q Turntable Custom Aluminum Badge for Base Plinth
Custom made badge for your Dual 1229Q turntable.
-
Dual 1229 Vintage Stereo Turntable Parting out – Single / Multi Play Selector
Pulled from a fully working turntable.
-
Dual 1229 tonearm
This Dual 1229 tonearm was pulled from a working deck, tested for continuity and serviced. The ends of the wires are ready to solder and a pull thread was attached for easy installation. The contact plate was always cleaned and the bearings lubricated. Note that the “ears” on the dearing ring are in perfect condition. All parameters meet Dual 1229 standards. Thanks for looking.
-
Dual 1229 turntable
Mint condition Dual 1229 for your consideration. Recently serviced, this fabulous turntable sounds as good as it looks. All functions are working flawlessly. The deck was stripped down to the chassis and all parts were cleaned, lubed, and inspected, before reassembling.
-
HEADSHELL SLED CARTRIDGE HOLDER FOR DUAL 1224 1225 1226 1228 1229 1229Q 1234
Sold as is as found with no implied warranty.
-
Dual 1229 Turntable w/ Dust Cover. Good Condition
It spins and will play records well. The strobe light works. The 33, 45, and 78 speeds work. The start and stop will move the arm to and from the platter and it will stop spinning in about 30-60 seconds after hitting stop.