The scarcity of good, honest techs who can do good and reasonably priced restoration/rebuild of audio equipment inspired me to create this restoration kit. In today’s day and age, it is difficult to find a knowledgeable technician who can service your audio gear properly. I have seen many poor quality restorations of equipment that cost way too much for their owners. In 99% of the cases, only a few parts were replaced, instead of a full and proper restoration job.A proper restoration must replace all electrolytic capacitors on all boards. Do not fall for partial kits that restore just one PCB (power supply, power amp, etc.). This is not a good or proper way to restore your audio equipment. It is the same as with car tires; one should never replace just one tire and keep the other worn-out tires on. A proper rebuild requires a full recap of all PCBs.On the other hand, if one succeeds in finding a good tech, the wait time is usually 6-12 months for the unit to be serviced, and costs are sky-high. I have been servicing audio equipment for many years and have developed deep respect for all good equipment. Knowing how amazing and warm these units can sound, I decided to put together this kit. It includes very good upgrades and improvements that must be done to the unit. This restoration kit will make a huge difference in the sound quality. All the parts are of high-quality Japanese Nichicon / Rubycon / IC / United Chemi capacitors.I am extremely particular about the quality of the parts provided in this kit. Knowing how many bogus/fake caps, diodes, resistors, etc. are out there, I source all the parts from reputable wholesalers and buy them in bulk. Vintage audio equipment has the potential to deliver rich and authentic sound when it is properly restored. Not only can it enhance your listening experience, but it can also evoke memories and bring joy to your life. Let’s work together to bring your vintage gear back to its full potential, and make sure you have the music you deserve. ♩♬♫♪♫♩♬ “They Shall Have Music”- Avery FisherIncluded in this kit: 1. Power/Filter stage capacitors (Nichicon / Nippon / United Chemi) electrolytic capacitors. 2. Detailed instruction with colorful images, schematics, manuals (all of these are in electronic form, I consider these much better than printed version due to zoom availability). 3. Schematics 4. Complete audio path upgrade with high quality US made (IC) or Nippon audio grade film capacitors. 5. Parts for compete recap of all the electrolytic capacitors. 6. Complete recap of all PCBs. 7. Transistors (PNP, NPN). 8. fuse/s 9. Instructions on how to clean the chassis. 10. Instructions on how to clean a faceplate 11. Instructions on how to polish knob covers. 12. Support/help to a reasonable extend in case you need it. (This is what makes us different from other sellers.) We also offer a great selection of Restoration Kits, LED conversion kits, Volume Controls, Rotary Switches and other rare/unique parts;Make sure to check our store ———> LINK (Use the search bar inside the shop to find what you need faster)We may also be interested in purchasing your equipment
Item Tag: 30 Days
-
HAFLER XL-280 XL-600 PC-40 REPAIR KIT
HAFLER XL-280 XL-600 PC-40 QUICK REPAIR KIT. THIS KIT CONTAINS EVERY DIODE AND TRANSISTOR USED ON ONE PC-40 DRIVER BOARD. ENOUGH TO REPAIR ONE CHANNEL. (D1 THRU D6 AND Q1 THRU Q15 — 21 SEMICONDUCTORS TOTAL) JFET INPUT DEVICES ARE GENUINE TOSHIBA 2SK246BL AND 2SJ103BL AND IDSS MATCHED AS A SET OF 4 AT 10 VOLTS. FOUR TO-92 HEAT SINKS INCLUDED FOR THERMAL STABILITY AT IDSS. OTHER INPUT TRANSISTORS ARE SCREENED FOR NOISE, AND BETA IS MATCHED FOR LOW OFFSET AND DISTORTION CHARACTERISTICS. KIT COMES WITH PC-40D PICTORIAL AND INSTRUCTIONS SHOWING DEVICE LOCATION AND ORIENTATION. SEE ALL DYNACO AND HAFLER KITS BY VISITING MY E-BAY STORE!!
-
HAFLER DH-220 DH-500 P225 P230 PC-19 CAPACITOR UPGRADE KIT
HAFLER PC-19 POLYPROPYLENE CAPACITOR UPGRADE KIT. THIS KIT CONTAINS EVERY CAPACITOR USED ON BOTH PC-19 DRIVER BOARDS. (C1 THRU C23 – 46 CAPACITORS IN ALL) VALUES OF 680pF AND LESS ARE MURATA 1000VOLT 5% CONFORMALLY COATED CERAMIC CAPACITORS. ELECTROLYTICS ARE NICHICON AUDIO GRADE GOLD OR BETTER. ALL OTHERS CAPACITORS ARE XICON, RUBYCON, OR PANASONIC 250 TO 630V 5% OR 10% POLYPROPYLENES. FEATURES • Low dissipation factor • High insulation resistance • High stability of capacitance and DF versus temperature and frequency • Self-healing properties • Non-inductive KIT COMES WITH PICTORIAL OF PC-19 SHOWING PARTS LOCATION AND SCHEMATIC. THANKS FOR LOOKING! **IF YOU ARE INTERESTED IN HAVING THIS UPGRADE INSTALLED PROFESSIONALLY BY A QUALIFIED AUDIOPHILE ENGINEERING SERVICE, PLEASE EMAIL ME FOR CONTACT INFORMATION
-
DYNACO HAFLER OTHERS TO-3 TRANSISTOR SOCKET
TO-3 TRANSITOR SOCKET FOR DYNACO HAFLER OTHERS . THESE ARE NEW FRESH STOCK MADE BY KEYSTONE.
-
HAFLER XL-600 PC-40 CAPACITOR UPGRADE KIT
AS REQUESTED – HAFLER XL-600 PC-40D CAPACITOR UPGRADE KIT. THIS KIT CONTAINS ALL THE CRUCIAL ELECTROLYTIC AND POLYPROPYLENE FILM CAPACITORS NEEDED TO UPGRADE BOTH PC-40 DRIVER BOARDS. CAPACITORS CAN CHANGE VALUE WITH TIME. THIS WILL DEGRADE PERFORMANCE, CAUSING FREQUENCY RESPONSE, HUM, AND STABILITY PROBLEMS TO ARISE. POLYPROPYLENE CAPACITORS ARE DESIRED FOR THERE LOW DISTORTION AND SMOOTH SOUND. UPGRADE NOW AND HEAR THE DIFFERENCE.THIS KIT CONTAINS THE FOLLOWING QUALITY ELECTROLYTIC AND POLYPROPYLENE CAPACITORS FOR BOTH PC-40 DRIVER BOARDS : C2 THRU C8,C12,C13,C15, C16,C17,C19,C20,C21,C22,C23, AND C24. (36 CAPACITORS IN ALL) NOTE: THIS KIT ADDRESSES ALL ELECTROLYTICS AND CAPACITORS THAT ARE NOT POLYPROPYLENE. C1,C9, C10,C14 AND C18 ARE ALREADY HIGH QUALITY POLYPROPYLENE OR MICA TYPE AND DO NOT NEED TO BE CHANGED. ELECTROLYTIC ARE NICHICON OR XICON AUDIO GRADE OR BETTER. ALL OTHERS CAPACITORS ARE PANASONIC, XICON, RUBYCON, OR CORNELL-DUBILIER 100 TO 630V POLYPROPYLENE. ALL CAPACITORS REQUIRING 3 OR 5% TOLERANCE WILL BE EITHER 3 OR 5% TOLERANCE OR SCREENED 5 OR 10% TOLERANCE CAPACITORS AND MARKED WITH A BLACK DOT. COMES WITH SCHEMATIC AND PC-BOARD PICTORIAL SHOWING CAPACITOR LOCATION. AS ALWAYS, THANKS FOR LOOKING!
-
HAFLER DH-110 PC-14 SEMICONDUCTOR REPAIR KIT
HAFLER DH-110 PC-14 COMPLETE QUICK REPAIR KIT. THIS KIT CONTAINS EVERY TRANSISTOR ON BOTH CHANNELS OF THE PC-14 CIRCUIT BOARD. (Q1 THRU Q14 — 28 SEMICONDUCTORS IN ALL). KIT COMES WITH SCHEMATIC, INSTRUCTIONS, AND PC-14 PICTORIAL SHOWING DEVICE LOCATION AND EBC ORIENTATION. NOTE: POWER SUPPLY KIT INCLUDING IC REGULATORS, DIODES AND MUTING FETS LISTED AND SOLD SEPARATELY AND CAN BE SEEN AT MY EBAY STORE UNDER THE SEMICONDUCTOR CATEGORY. AS ALWAYS,THANKS FOR LOOKING!
-
HAFLER DH-220 DH-500 P-225 P-230 PC-19 INPUT TRANSISTOR MATCHED SET
HAFLER DH220 DH500 P225 P230 PC-19 MATCHED INPUT TRANSISTOR REPAIR KIT. THIS KIT SOLVES 95 PERCENT OF ISSUES RELATING TO DC OFFSET OR POPCORN NOISE AND HISS. TRANSISTORS Q3, Q4, Q5, AND Q6 ARE SCREENED AND MARKED WITH RED TOPS. ENOUGH TO RENEW ONE CHANNELOF THE PC-19 DRIVER BOARD. (6 SEMICONDUCTORS TOTAL) KIT COMES WITH PC-19 PICTORIAL SHOWING DEVICE LOCATION AND ORIENTATION. SEE ALL MY DYNACO AND HAFLER KITS BY VISITING MY E-BAY STORE!! DON’T FORGET TO ADJUST BIAS AND CHECK OFFSET AFTER REPLACEMENT.
-
Lot of 2 – DYNACO HAFLER Transistor Socket, TO-3, White Ceramic, Gold Pins, New
Lot of 2 – DYNACO HAFLER TO-3 TRANSISTOR SOCKET. TO-3 STYLE Power Transistor and/or Voltage Regulator Socket. Heavy Duty White Ceramic Board/Chassis/PCB Mount. Length 1.50″ (38 mm) X Width 0.78″ (20 mm) X Thickness of Base Ecluding pins 0.300″ (7.8 mm) 6/32 Threaded Base Vintage High Quality well Manufactured Professional Component ideal for High-end Commercial and Audio. High Thick Gold Plated Pins Difficult Vintage TO-3 Socket Component to Locate. Suitable to High End Audio – Marantz, Nakamichi, Rotel, Thorens, Bang & Olufsen, Crown International, Denon, DAC, Tandberg, Luxman, Onkyo, Teac, Cambridge Audio, McIntosh, Accuphase, CCU NAD, Audiolab, JBL, Pioneer, Harman Kardon, CM LABS, Technics, Kenwood, JVC, & Sony. Vintage – New Old Stock – Rare Proudly Made in USA Note: Discounts provided for lot purchases of 2, 3, or 4 with “Make Offer ” option limited to bulk purchases.
-
HAFLER DH-120 5.1K 3 WATT REPLACEMENT RESISTOR FOR R10 2PK !!
HAFLER DH-120 5.1K 3 WATT REPLACEMENT RESISTORS FOR R10 . THESE REPLACE THE 2 WATT HIGH FAILURE RATE RESISTORS IN YOUR HAFLER DH-120 AMPLIFIERAS. ALWAYS, THANKS FOR LOOKING.