This listing is for one 8-foot Cord and Plug set. CHOOSE ANY COLOR: Twisted Cloth Covered Wire & 1 Plug Attached In buyer’s notes section during checkout (or message us after purchase!), let us know your Wire Color and Plug Color: WIRE: Solid colors: black (rayon or cotton), brown (rayon or cotton), red (rayon or cotton), green (rayon or cotton), white (rayon or cotton), ivory, gold, light gold, yellow, copper, tan (beige), clay, silver, slate blue, royal blue, purple, red wine/plum, steel gray, pink, bronze Zigzag patterns: black/white, black/brown, black/gray, black/tan, brown/tan, red/white, green/yellow Two colors twisted together: black/white, red/green (If you need help deciding, visit the twisted wire section of our store!)PLUG: Black (round, long neck), White (wide flat), or Brown (wide flat) The perfect addition to any lamp or small appliance, this beautiful braided cloth covered electrical wire and antique style plug is a great way to replicate that vintage charm. This kit includes 8 feet of wire and your choice of plug. If you need more than 8 feet of wire, purchase this item plus the additional length you need from our separate per-foot wire listings ($1.65 per foot), or message us and we can invoice you separately! Extra plugs available separately, see the Plugs Section of our store. I will attach the plug and tape off the other end to prevent the fabric from fraying. This is BRAND NEW, antique style 2-wire, 18 gauge (known as 18/2), and a BRAND NEW plug . Each wire is a copper insulated wire (much like standard wiring of today) then covered in a braided cotton or rayon cloth. The fabric is soft and colorful, similar to old cloth covered wiring. A simple rewiring can really breathe new life into an old fixture, if you’re unsure of how to do it there are many step by step instructions and videos that can be found online, it’s easier than you think! Specs:Max: 600 Volts, 105 Degrees CelsiusDiameter: 6.5mm, or about 1/4″UL: No Visit our eBay store to see all our items: Snake Head Vintage Suitable for: Table-top, floor, and pendant use as well as many other applications, include wiring fans and small appliances. Wire is not intended to carry a heavy electrical load, and should not be used for larger appliances, high heat settings, or to carry other large electrical currents. You are responsible for the safe use of these products, if you are unsure of your abilities or the requirements of your application, we recommend you consult with an electrician or qualified professional. A simple rewiring can really breathe new life into an old fixture, if you’re unsure of how to do it there are many step by step instructions and videos that can be found online, it’s easier than you think! Buy with confidence, 17 years on eBay, perfect feedback! All of our items can be combined for discounted shipping prices, just make sure to add all of the items to your shopping cart and checkout once! We work hard to provide quality products at the BEST prices around, the FASTEST and most AFFORDABLE shipping possible, and COMPLETE customer SATISFACTION! See what some of our Cloth Covered Wire customers have said in our feedback: SUPER Fast shipping. Very nice seller, will order with them again!! “Best price for twisted vintage cord! Very happy! Thanks! Buy from this guy!” Item is of excellent quality! Delivery was first-rate. Exceptional packaging. A+ really top quality product….FAST shipping. A+ ebayer A++++++ seller. Great prices, discounts, quality product.. You can’t go wrong.TY Love this wire!! Love this seller, will order agian! fast ship w/tracking, great e-mails, beautiful cord very nice “great braided cord and fassssst shipping!!!+++”
Item Tag: 30 Days
-
10 New Warm White Axial LED Wired 8V Lamps Vu Meter Light Bulbs (Qty Avail)
Up for sale here is this set of 10 new 8v axial warm white LED light bulbs. These are perfect for replacing any of the 6v-8v axial lamps found in vintage gear. They will get just as bright as the old ones. Specs: Voltage: 8v AC/DC (they will work fine at 6.3v, 7v, or 8v) Current Draw: 10mA Color: Warm White Body Length: 19mm Body Height: 6mm Wire length: 25mm per wire Total Length: 69mmPolarity: Non-polar These are brand new bulbs and are guaranteed to work great for you. These bulbs are generally used for meter and tuning dial illumination, not for stereo beacons, tuning needle lights, or source selector lights. I have other bulbs listed, including incandescent axial lamps and LED fuse lamps, so if you need those, take a look at my other listings. Please see my pictures for details. US shipping and handling is $5, and international is $18, no matter what quantity you buy. All my small parts are set up for combined shipping, so just use the “add to cart” feature and then check out all at once, and it will combine shipping. If you have any questions, please ask. Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new power cords, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, new 630v yellow film capacitors at 13 different values, a large variety of transistors for vintage stereo repair, and more. Just use “add to cart” on everything you want and then check out for combined shipping.
-
SET OF 3 STEEL BARREL NUTS & SCREWS FOR 10.5″ METAL NAB TAPE REELS
If you are looking for great REEL TO REEL tapes ADD US TO YOUR FAVORITES LIST!We specialize in HIGH QUALITY open reel recordings of music, personality interviews, old radio shows and more. Tape speed is usually 15ips but we also sell recordings at 7.5ips, 3.75ips and occasionally 30ips. LOOKING FOR LEADER TAPE, SPLICING TAPE AND OTHER RECORDING SUPPLIES? CHECK OUR LISTINGS FOR THE BEST PRICES! Need replacement screws and barrel nuts for your 10.5″ reels? We have the solution for you with our BRAND NEW beautiful precision quality steel barrel nuts & screws. These are newly manufactured. A fine screw thread insures a tight fit and perfect threading every time. These screws and nuts are designed to fit any 3 screw metal NAB reel or flange ever manufactured including 12.5″ and 14″ reels. It takes 3 nuts and 3 screws to assemble a NAB metal reel, so… YOU GET 3 NUTS AND 3 SCREWS Perfect if you have or use loose flanges to handle 1/4″ tape pancakes with NAB hubs. DON’T BE FOOLED BY SELLERS THAT HAVE LOW PRICES & HIGH SHIPPING COST. WE HAVE THE BEST PRICE! PLEASE ASK QUESTIONS BEFORE YOU BUY. I usually reply to questions the same day but it depends on what time I get them.
-
Han-D-Mag Tape deck demagnetizer….NEW!! Best price!
We have done it again!! We offer you the best combination of Quality, Price and Customer Service. We are True RB Annis authorized dealers. Honest to God truly real dealers. We don’t just blow smoke and pretend. You also receive a REAL full factory warranty with your Han-D-Mag. SPLICIT Reel Audio Products Fully Authorized RB Annis Han-D-Mag Dealer. AUTHORIZED DEALER FOR RMGI-EMTEC This auction is for (1) – No need to buy from a blow-hard when you can buy from a real authorized RB Annis distributor. And you will have the satisfaction of knowing your demag will be backed with a full factory warranty. These are brand new fresh units….High quality Audiophile HAN-D-MAG demagnetizer. Protect your valuable recordings with the best demagnetizer on the planet!! Valuable audio and video tapes can be damaged when played on equipment that is not thoroughly and regularly demagnetized. Invest in the best tool for the job. We also sell the following products for your reel to reel needs: Professional Splicing Tape Reverse Sensing Foil Tape Hold Down Tape Complete Tape Splicing kits (incl. splicing block, splicing tape, reverse foil sensing tape, instructions) 3″Plastic Reels, 5″ Plastic Reels w/Boxes 7″ Plastic Reels w/Boxes. See our other auctions for reel to reel needs. Please see us first for all of your recording supplies. We do this because we love it and our enjoyment comes from providing you with high quality new and hard to find reel to reel items. Check our feedback and buy with confidence. Your item will be shipped promptly after payment is received.
-
McIntosh MC225 amplifier restoration cap repair service rebuild kit capacitor
The scarcity of good, honest techs who can do good and reasonably priced restoration/rebuild of audio equipment inspired me to create this restoration kit. In today’s day and age, it is difficult to find a knowledgeable technician who can service your audio gear properly. I have seen many poor quality restorations of equipment that cost way too much for their owners. In 99% of the cases, only a few parts were replaced, instead of a full and proper restoration job.A proper restoration must replace all electrolytic, paper, film, oil capacitors. Do not fall for partial kits. This is not a good or proper way to restore your audio equipment. It is the same as with car tires; one should never replace just one tire and keep the other worn-out tires on. A proper rebuild requires a full recap of all PCBs.On the other hand, if one succeeds in finding a good tech, the wait time is usually 6-12 months for the unit to be serviced, and costs are sky-high. I have been servicing audio equipment for many years and have developed deep respect for all good equipment. Knowing how amazing and warm these units can sound, I decided to put together this kit. It includes very good upgrades and improvements that must be done to the unit. This restoration kit will make a huge difference in the sound quality. All the parts are of high-quality Japanese Nichicon / Rubycon / IC / United Chemi capacitors.I am extremely particular about the quality of the parts provided in this kit. Knowing how many bogus/fake caps, diodes, resistors, etc. are out there, I source all the parts from reputable wholesalers and buy them in bulk. Vintage audio equipment has the potential to deliver rich and authentic sound when it is properly restored. Not only can it enhance your listening experience, but it can also evoke memories and bring joy to your life. Let’s work together to bring your vintage gear back to its full potential, and make sure you have the music you deserve. ♩♬♫♪♫♩♬ “They Shall Have Music”- Avery FisherIncluded in this kit: 1. Power/Filter stage capacitors (Nichicon / Panasonic / United Chemi) electrolytic capacitors. Note, the image with silver multicap cans shown restaffed with new caps is for illustration purpose only. 2. Detailed instruction with colorful images, schematics, manuals (all of these are in electronic form, I consider these much better than printed version due to zoom availability). 3. Schematics (all of these are in electronic form, I consider these much better than printed version due to zoom availability).4. Complete audio path upgrade with high quality US made (IC) or Panasonic audio grade film capacitors. 5. Parts for compete recap of all the electrolytic capacitors. 6. Complete recap of all oil, film, paper, lytic caps. 7. fuse/s 8. Instructions on how to clean the chassis. 9. Instructions on how to clean a faceplate 10. Instructions on how to polish knob covers. 11. Support/help to a reasonable extend in case you need it. (This is what makes us different from other sellers.) We also offer a great selection of Restoration Kits, LED conversion kits, Volume Controls, Rotary Switches and other rare/unique parts;Make sure to check our store ———> LINK (Use the search bar inside the shop to find what you need faster)We may also be interested in purchasing your equipment
-
Professional Voice Coil Shims for Reconing Speakers
8 professional quality speaker voice coil shims They measure approximately 4″ x 1″x .005 thick. They can be cut in half for smaller drivers. 8 shims will be enough for one pair of woofers. Shims are used to align the speaker voice coil when re-coning a speaker. The shims in this auction are plastic, they will not leave lint or tear in your voice coil gap. These are the same shims professionals use to re-cone speakers and are made specifically for the purpose. We are happy to offer international shipping. See shipping for details.
-
Generic Replacement Power Cord Reel to Reel 2 Prong “AC POWER IN” Socket TEAC A-
New power cord, modified connector for perfect fit to 2 prong connector socket (like the example pictured) on Teac, Pioneer, Sony, Sansui reel to reel tape decks.OEM power cords for these decks are obsolete and no longer produced.This is a brilliant replacement for the discontinued OEM power cord.High quality cord. Please carefully compare specification details with others claiming higher quality. Six foot length (not 5 foot)HPN 16 Gauge (not thinner 18 gauge)Flexible Neoprene jacket (not stiff, kink-prone plastic)UL ListedRated 15 AMPS (not 13 amp, not 10 amp)Rated 125 VoltsRated 1875 Watts (not 1625 or less)Rated 90 degrees C, 300V (not less) Connects tape deck to standard North American wall outlet or power strip. Best for safety and performance. ***NOTE*** Make sure your tape deck has an “AC Power In” connector similar to the one pictured. The same connector on Sony Tapecorders are usually labeled “Power Supply”. Hundreds of satisfied customers. Quick and free shipping to all USA locations.
-
Replacement Belt-Rewind Idler, SONY TC-530, TC-540, TC-255, TC-105 reel to reel
Replacement belt for SONY reel to reel tape decks.Replaces part # 3-418-208Rewind idler to motor o-ring type beltFreshly manufacturedFits SONY TC-530, TC-540, TC-355, TC-255, TC-155, TC-105, TC-630 and possibly others.
-
2 Pioneer Speaker Jack Plug Connector Replacements SX-626 727 820 828 990 6000
One pair of quality reproduction plugs for speaker wire connection to Pioneer, Akai and Allied Radio Shack receivers. Customized in our shop for a perfect fit, these plugs have brass conductors with screw terminals for maximum signal transfer. No soldering required. Speaker wire not included. Free same day domestic shipping if ordered before 3:00 PM Eastern Time. These plugs fit the following amplifiers, receivers, components: Compatible PIONEER Models: H Series 8-Track Receiver: H-555, H-802, H-803, H-7000, H-R9000 K Series: K71-032, K71-642, K72-007 QA Series: QA-800 QM Quadraphonic: QM-800A SA Series: SA-100, SA-302, SA 302R, SA-500, SA-500A, SA-600, SA700, SA-800, SA-900, SA-1000 SX Series: SX-300T, SX-400, SX-410, SX-424, SX-440, SX-525, SX-626, SX-700T, SX-727, SX-770, SX-820, SX-828, SX-990, SX-1000, SX-1000TD, SX-1000TW, SX-1500, SX-1500T, SX-1500TD, SX-2500, SX-3000, SX-6000, SX-9000 QX Series: QX-4000, QX-8000, QX-9000, QX-9900 Compatible AKAI Models AA Series: AA-910, AA-920, AA-930, AA-940, AA-960, AA-970, AA-980 AS Series: AS-980 Compatible ALLIED Radio Shack Models: 335, 339, 365, 380, 395, 399, 429, 435, 445, 490, 498, 475, 495, 995 Package contains one pair (2 plugs). International Buyers: Import taxes are the buyer’s responsibility. If such taxes are not added when you make your purchase, you may be responsible for them upon receipt of your package, depending on the laws of your country. You will not be charged twice for taxes.
-
BELTS AKAI GX-4000D GX-4000DB X-5000L X-5000W 4000-D 4000-DB 4000-DS 4000-DS MK2
BELT KIT FOR AKAI MODELSGX-4000D, GX-4000DB, X-5000L, X-5000W4000-D, 4000-DB, 4000-DS, 4000-DS MK2YOU WILL RECEIVE 2 BELTS, CAPSTAN BELT AND COUNTER BELTNEW FRESH STOCK USA FREE SHIPPING WITH TRACKINGPICKUP IS NOT AVAILABLE———————————– TRR-6/RR-1