Item Tag: 30 Days

  • Marantz Cassette Deck 5120 Tape Counter

    Marantz Cassette Deck 5120 Tape Counter. Tested good

  • Marantz Cassette Deck 5120 Button Assembly

    Marantz Cassette Deck 5120 Button Assembly. Used condition scratches no cracks

  • NAD 7030 LED Light Bulb Replacement Kit 2 Lamps For Radio Tuning Dial

    Up for sale here is this set of 2 new 8v axial warm white LED light bulbs, perfect for replacing the tuning dial lights in the NAD 7030. The original bulbs are extra-small fuse lamps, which are not made any more, but you can solder these lights in easily, and they will look great! These are solder-in replacements, so you don’t need to add resistors or anything else. They are perfect for replacing any of the 6v-8v axial lamps found in vintage gear. They will get just as bright as the old ones. I also have these available in cool blue and emerald green, so if you want one of those colors just leave me a note with the purchase. Specs: Voltage: 8v AC/DC (they will work fine at 6.3v, 7v, or 8v) Current Draw: 10mA Color: Warm White Body Length: 19mm Body Height: 6mm Wire length: 25mm per wire Total Length: 69mmPolarity: Non-polar These are brand new bulbs and are guaranteed to work great for you. These bulbs are generally used for meter and tuning dial illumination, not for stereo beacons, tuning needle lights, or source selector lights. I have other bulbs listed, including incandescent axial lamps and LED fuse lamps, so if you need those, take a look at my other listings. Please see my pictures for details. US shipping and handling is $5, and international is $18, no matter what quantity you buy. All my small parts are set up for combined shipping, so just use the “add to cart” feature and then check out all at once, and it will combine shipping. If you have any questions, please ask. Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new power cords, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, new 630v yellow film capacitors at 38 different values, new 1200v yellow film capacitors at 15 values, a large variety of transistors for vintage stereo repair, new Wima film capacitors for stereo repair, new 250v yellow film crossover capacitors, and more. Just use “add to cart” on everything you want and then check out for combined shipping.

  • Pioneer SA-7800 replacement meters LED lamps lights bulbs kit set

    As someone who has serviced many various vintage audio equipment for a considerable amount of time, I have developed a deep admiration for good quality gear. However, I have noticed that many of these units suffer from constantly failing incandescent bulbs, resulting in wasted money on services to replace them time and time again. After years of dealing with this issue, I decided to take matters into my own hands and develop an LED replacement that would match the color temperature and angle of the light. Through my research and collaboration with a manufacturer of LED bulbs, I was able to develop a perfect replacement that not only matches the color temperature but also offers a 360-degree lighting angle compared to the 120-degree angle of regular LED bulbs. This LED replacement has the correct voltage and is sure to save users time and money in the long run. I am thrilled with the results of my efforts and confident that this LED replacement will be a game-changer. Say goodbye to constantly replacing incandescent bulbs and hello to the reliable and efficient lighting of LED technology. Included: 2 x Axial 2 x wired axial1 x bi-pin We also offer a great selection of Restoration Kits, LED conversion kits, Volume Controls, Rotary Switches and other rare/unique parts;Make sure to check our store ———> LINK (Use the search bar inside the shop to find what you need faster)We may also be interested in purchasing your equipment

  • New Alps SDU3P Power Switch – NAD Realistic Marantz Concept 16.5 Sanyo

    Up for sale here is this new Alps power switch. This is an extra-fancy switch and is the correct replacement for a number of switches on some vintage NAD, Realistic, Marantz, Concept, Sanyo, Luxman, and other receivers from the 1970s and 1980s. If your old switch looks fairly similar to this, this is probably the correct power switch for you. This is the best possible replacement for these switches–it has the metal mounting bracket with the screw holes, and has the correctly spaced AC pins so it will fit the circuit board mounts perfectly. You will most likely need to install a snubber capacitor for this in order to protect it. I have those available here, if you don’t already have one. Buy a snubber. Please. Installing this is simple–just wire it up exactly like the old one, using the new snubber capacitor to replace the old one. If you don’t see a snubber capacitor attached to your power switch, just wire it across the AC terminals. US shipping and handling is $5, and international is $18, no matter what quantity you buy. All my small parts are set up for combined shipping, so just use the “add to cart” feature and then check out all at once, and it will combine shipping. If you have any questions, please ask. Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new power cords, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, new 630v yellow film capacitors at 38 different values, new 1200v yellow film capacitors at 15 values, a large variety of transistors for vintage stereo repair, new Wima film capacitors for stereo repair, new 250v yellow film crossover capacitors, and more. Just use “add to cart” on everything you want and then check out for combined shipping.

  • New Schadow SDU3P Power Switch – NAD Realistic Marantz Concept 16.5 Sanyo

    Up for sale here is this new Schadow power switch. This is an extra-fancy switch and is the correct replacement for a number of switches on some vintage NAD, Realistic, Marantz, Concept, Sanyo, Luxman, and other receivers from the 1970s and 1980s. If your old switch looks fairly similar to this, this is probably the correct power switch for you. You will most likely need to install a snubber capacitor for this in order to protect it. I have those available here, if you don’t already have one. Installing this is simple–just wire it up exactly like the old one, using the new snubber capacitor to replace the old one. If you don’t see a snubber capacitor attached to your power switch, just wire it across the AC terminals. US shipping and handling is $5, and international is $18, no matter what quantity you buy. All my small parts are set up for combined shipping, so just use the “add to cart” feature and then check out all at once, and it will combine shipping. If you have any questions, please ask. Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new power cords, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, new 630v yellow film capacitors at 38 different values, new 1200v yellow film capacitors at 15 values, a large variety of transistors for vintage stereo repair, new Wima film capacitors for stereo repair, new 250v yellow film crossover capacitors, and more. Just use “add to cart” on everything you want and then check out for combined shipping.

  • NAD 402 502 701 705 712 5420 5425 LED Lamp Light Kit Display Backlight (2 Bulbs)

    Up for sale here is this set of 2 new 15v axial warm white LED light bulbs. These are perfect for replacing the two display backlight bulbs in a number of NAD receivers and CD players, such as the NAD 402, 502, 701, 705, 712, 5420, 5425, and others. The 502 normally uses a pair of small bulbs, but you can wire one of these bulbs to one terminal from where each old bulb went to and it will light up nicely. These are all ready to be installed and don’t need any additional resistors or rectifiers. Specs: Voltage: 15v AC/DC (they will work fine at 14) Current Draw: 10mA Color: Warm White Body Length: 25mm Body Height: 6mm Wire length: 25mm per wire Total Length: 75mmPolarity: Non-polar These are brand new bulbs and are guaranteed to work great for you. Please see my pictures for details. I have shown some pictures of one of these bulbs installed in a NAD 5425, though the NAD is not included, just the bulbs. US shipping and handling is $5, and international is $18, no matter what quantity you buy. All my small parts are set up for combined shipping, so just use the “add to cart” feature and then check out all at once, and it will combine shipping. If you have any questions, please ask. Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new power cords, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, new 630v yellow film capacitors at 13 different values, a large variety of transistors for vintage stereo repair, and more. Just use “add to cart” on everything you want and then check out for combined shipping.

  • Teac AN-300 noise reduction restoration service kit repair rebuild capacitor

    The scarcity of good, honest techs who can do good and reasonably priced restoration/rebuild of audio equipment inspired me to create this restoration kit. In today’s day and age, it is difficult to find a knowledgeable technician who can service your audio gear properly. I have seen many poor quality restorations of equipment that cost way too much for their owners. In 99% of the cases, only a few parts were replaced, instead of a full and proper restoration job.A proper restoration must replace all electrolytic capacitors on all boards. Do not fall for partial kits that restore just one PCB (power supply, power amp, etc.). This is not a good or proper way to restore your audio equipment. It is the same as with car tires; one should never replace just one tire and keep the other worn-out tires on. A proper rebuild requires a full recap of all PCBs.On the other hand, if one succeeds in finding a good tech, the wait time is usually 6-12 months for the unit to be serviced, and costs are sky-high. I have been servicing audio equipment for many years and have developed deep respect for all good equipment. Knowing how amazing and warm these units can sound, I decided to put together this kit. It includes very good upgrades and improvements that must be done to the unit. This restoration kit will make a huge difference in the sound quality. All the parts are of high-quality Japanese Nichicon / Rubycon / IC / United Chemi capacitors.I am extremely particular about the quality of the parts provided in this kit. Knowing how many bogus/fake caps, diodes, resistors, etc. are out there, I source all the parts from reputable wholesalers and buy them in bulk. Vintage audio equipment has the potential to deliver rich and authentic sound when it is properly restored. Not only can it enhance your listening experience, but it can also evoke memories and bring joy to your life. Let’s work together to bring your vintage gear back to its full potential, and make sure you have the music you deserve. ♩♬♫♪♫♩♬ “They Shall Have Music”- Avery Fisher Included in this kit: 1. Power/Filter stage capacitors (Nichicon / Panasonic / United Chemi) electrolytic capacitors. 2. Detailed instruction with colorful images, schematics, manuals (all of these are in electronic form, I consider these much better than printed version due to zoom availability). 3. Filter Capacitor Encyclopedia & Initial Instructions guidelines. 4. Complete audio path upgrade with high quality US made (IC) or Panasonic audio grade film capacitors. 5. Parts for compete recap of all the electrolytic capacitors. 6. Complete recap of all PCBs. 7. Transistors (PNP, NPN). 8. fuse/s 9. Instructions on how to clean the chassis 10. Instructions on how to clean a faceplate 11. Instructions on how to polish knob covers. 12. Support/help to a reasonable extend in case you need it. (This is what makes us different from other sellers.) Also check our other items ———–> LINKWe may be interested in purchasing your equipment.

  • TEAC RE-1002 10″ Metal Reel, Three Window Silver, Teac Box + Bag

    TEAC RE-1002 10″ Metal Reel, Three Window Silver, Teac Box + Bag TEAC RE-1002 10″ Metal Reel, Three Window Silver, Teac Box + Bag &times Buy now and save! Tell a friend Watch now Postage info Click the Postage tab above the listing description for more info Click the Postage tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYING VIA PAYPAL We accept PayPal on our all our items so you can shop with confidence. Simple choose the PayPal option when proceeding through the checkout. Additional Information No additional information at this time Ask seller a question You might also like Ampex 341 Reel to Reel Recording Tape, LP, 7″ Reel, 1800 ft, Refurbished Ampex 361 Reel to Reel Recording Tape, TP, 7″ Reel, 3600 ft, Refurbished Ampex 541 Reel to Reel Recording Tape, LP, 7″ Reel, 1800 ft, Refurbished Ampex 546 Slow Speed Oxide Reel to Reel Tape, LP, 7″ Reel, 1800 ft, Refurbished Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © The Ultimate Resource for the Reel to Reel Enthusiast Postage Click the Postage tab above the listing description for more info Payment Accepted Payment Methods PayPal Returns Returns are accepted Items must be returned within 30 days of the auction ending Buyer will pay for return shipping. eBay integration by

  • Sony SLV-D360P DVD VCR Combo VHS Cassette Player Hi-Fi Stereo Progressive

    Sony SLV-D360P DVD VCR Combo VHS Cassette Player Hi-Fi Stereo Progressive with Analog TV Tuner Please note that this is NOT a DVD Recorder and will not transfer VHS tapes to DVDs. [RESTORED] 100% fully functional EXCELLENT CONDITION. Rigorously tested, restored, and fully cleaned inside and out. The unit will come re-packaged and will be securely shipped to ensure safe arrival. Unit will show very minimal scratches and is free of dents. Includes everything you need to get setup with your old or new television. Includes: Unit with power cable, Remote with 2x AA Batteries, RCA Cables, AV to HDMI Adapter (you’ll need this if your TV doesn’t have the Red, Yellow, White inputs), HDMI Cable, digital PDF instruction manual Everything you need to hook up to your NEW OR OLD television. This Sony VCR-DVD combo is a versatile unit that can play a variety of media formats. With its ability to play S-VHS, VHS, DVD-R, MP3, DVD, DVD-RW, JPEG, DVD+RW, Audio CD, and DVD+R, it is perfect for any vintage electronics collector or music enthusiast. The unit offers composite (RCA), component, S-Video, and analog TV tuner connectivity, as well as features like VCR, analog TV tuner, Hi-Fi audio, and progressive scan. It is a great addition to any home entertainment system and is sure to provide high-quality audio and video playback. Please note that this is NOT a DVD Recorder and will not transfer VHS tapes to DVDs. Dimensions: 17″ wide x 13″ deep x 4″ high Product highlights:DVD Player:plays DVD-video, DVD-R & DVD-RW, DVD+R & DVD+RW, and Video CDplays audio CD, CD-R & CD-RW, and MP3 CDsplays digital picture CDs (JPEG, Kodak)selectable progressive-scan playback for smoother video with HD-compatible TVs (via the component video output)simultaneous VCR recording and DVD playbackoptical and coaxial digital audio outputs for Dolby® Digital/DTS®/PCM2 sets of A/V outputs: 1 for DVD (composite, S-video, 480i/480p component video), 1 for DVD/VCR (composite)2 sets A/V inputs (composite), including 1 front-panelRF input/output (both DVD and VCR audio and video can be sent to TV via RF output)54MHz/10-bit video D/A converterdesigned for use with “Region 1” coded DVDsVCR:HiFi stereo with MTS decoding8-event timer recordingone-touch record2 recording settings (SP/EP)auto clock and channel setstandard TV tuner4 video headsQuasi-S-VHS playbackflash rewind