Item Tag: AEC-178

Pioneer SX-1250 SX-1050 SX-780 SX-3900 SG-9500 Replacement Felt Pad for Base Feet AEC-178. File Photo. ((SET OF 4 each or (2 PAIR) PER SALE!)) Fits almost all Pioneer units not just the ones listed above!Replaces torn and loose or destroyed felt from almost all Pioneer receivers. Pull off old felt make sure base foot is tight & clean then apply new felt. Felt is a little thicker than original and works well! ((Will be sent in a regular envelope though USPS Mail))This came from SX-1250. Parts could fit other different Application’s and Receivers. Do your homework. We do not guarantee it will fit your particular receiver. (((Part is guaranteed to be operational.))) Contact for return must be within 14 days of purchase. Customer pays shipping for refund depending on issue! Part will be marked to prevent part swapping. (Shipping Lower 48 US Only!) Guarantee is void if damaged or tampered with. Sale is only for the part listed only. Feedback is reciprocated after receiving usually within 30 days. (((Photos may not always be of the exact part being sold due to many items of the item pictured being listed at one given time.))) ******We Suggest all boards be recapped before installation regardless of condition!!! ********We also suggest all switches be cleaned and lubed before installation!!! *********We also suggest all switches be cleaned and lubed before installation!!!

Pioneer SX-1250 SX-1050 SX-950 SX-850 SX-1280 SX-980 SG-9 SG-9800 SX-950 SX-850 SX-3700 SX-3800 SX-3900 SX-750 SX-650 Base Foot Assy (Set of 4!!) AEC-178These base feet fit many different units not listed!!!! File Photo. (Shipping Lower 48 US Only!)Manufactured here in Minnesota This, a reproduction part that is used on many Pioneer Stereo Receivers over the years starting in 1969. The part reproduced is the Base Foot Assembly that is used on the base plate of your receiver to allow the bottom of the unit to have air flow and not scratch whatever the receiver is sitting on. Delrin Acetal a High-Quality Product, is what is used on this product to exceed the original specifications to add strength and support to avoid stress cracks and breakage, allowing this product to deliver years of problem free issues. The felt is also a higher quality and should last a long time and can easily be replaced in the future if need be. The product comes with four 1/2-inch direct replacement screws. Some units may use a longer screw, if that is the case we suggest you supply the screw needed for that particular application and when you do, remove the base plate install the new base feet and measure the screw being used so it does not damage any boards or wires. These base feet are exact reproductions for the following units: Pioneer SX-1250 SX-1050 SX-950 SX-850 SX-3700 SX-1280 SG-9, 9500 and 9800. ((((((These also can be used for replacement on the following: SX-580 SX-680 SX-780 and SX-880!! On these units there are clip on feet but when you remove the foot from these units there is already a set screw hole to put these on!! Again, keep an eye on the length of the attached screw!!)))))) Again, always remove the base plate on any unit to replace the base feet. Order comes with 4 Feet 4 screws and 4 felt pieces that will need to be installed after feet are installed! Again, this is a new remanufactured part that is guaranteed to meet or exceed the specifications of the part you are replacing. Please review the photos carefully and contact us with any questions before purchase. ((Sold as a set of 4 Each)).