Re-spider kit for the 12″ woofer. Red over gray foam like original. Includes a 4 piece shim pack, and everything else pictured. This will fit 99% of Cerwin 12″ woofers that use the common 2″ voice coil. If you have a woofer like the 121-4 which uses a 1.5″ voice coil, I have the spiders for that too. Just message me when you buy, and I’ll make sure to put that spider in your kit. This kit is enough for 1 speaker. This kits has the 3.75″ dustcap. If you need the 4.5″ dustcap, let me know and I’ll pack that one. If you need a kit for a 15″ woofer let me know. If you aren’t sure if this will fit your woofer, let me know what woofer you have and we will make sure. Some speakers came with different woofers, and many speakers have had woofers swapped out over their lifetimes, so popping the woofer out and getting the model off the woofers is the best way to verify, rather than speaker model. Also included is a sheet of tips and suggestions from decades of experience, along with my personal phone number should you have an issue. If you have any questions, or want a specific bunch of parts put together for you, let me know. I’m here to help and happy to put together any combination of parts you need. 20+ years on Ebay, selling mostly speaker related stuff, and mostly Cerwin Vega, with 100% positive feedback. Will be packed securely and shipped promptly. Thanks!
Item Tag: BCA-CV-RC-1064
-
15″ Refoam + spider Kit for Cerwin Vega 217r and many HED models, options
I can customize this kit if desired. As pictured, it is designed to repair the woofers on speakers like the 1st version 217R with the 153 woofer which had gray foam, tan gaskets, and plain dustcaps, and was mounted inside the cabinet. There was also a very different second version of the 217R which had one tweeter instead of two on the front. Most of the woofers in these old-but-gold speakers seem to be needing spiders, so this kit includes new spiders, and the tan gaskets they used on the “inside mount” woofers. This kit will fit most woofers that used the flat attach foams, however Cerwin made many design variations and part substitutions with their speakers, and Heppner (the company that built the woofers for cerwin vega) did the same. So, going by speaker model, and/or woofer model, isn’t always enough. The BEST way to verify parts and fitment, is to check with me, and I will probably ask for pictures. Some steel framed woofers used a taller spider. And a picture will let me know. If you prefer red (red over gray actually) foam, let me know and I’ll substitute it for you. If you prefer dustcaps with the logo, let me know and I’ll put those in instead. This kit comes with 3035 glue for the foams, black glue for the dustcaps, and epoxy for the spider. Also included is a sheet of tips and suggestions from decades of experience, along with my personal phone number should you have an issue. If you have any questions, or want a specific bunch of parts put together for you, let me know. I’m here to help and happy to put together any combination of parts you need. 20+ years on Ebay, selling mostly speaker related stuff, and mostly Cerwin Vega, with 100% positive feedback. Will be packed securely and shipped promptly. Thanks!
-
10″ Recone Kit ribbed cone for Cerwin Vega AT10 At-10 ATW10 woofer
Complete recone kit for the Cerwin ATW10 woofer. Kits include everything in the picture. Shims available on request. Also included is a sheet of tips and suggestions from decades of experience, along with my personal phone number should you have an issue. If you have any questions, or want a specific bunch of parts put together for you, let me know. I’m here to help and happy to put together any combination of parts you need. 20+ years on Ebay, selling mostly speaker related stuff, and mostly Cerwin Vega, with 100% positive feedback. Will be packed securely and shipped promptly. Thanks!
-
12″ 4 Ohm Recone Kit for Cerwin Vega 122w2 woofer D7 D5 U321 others
Recone kit for the Cerwin Vega 122W2 woofer. Red over gray foam like original. All new high precision voice coils, on ALUMINUM formers like the originals. Cerwin used aluminum formers for a reason. They are stronger and dissipate heat better than kapton, which is what everyone else uses in their kits these days. Several years, and more recones than I can count went into developing these to provide kits that not only take the pounding that I know you’re going to give them, but also match the t/s parameters of the originals. These cones are pressed rather than pulp, so they are thinner but more dense, and retain the same mass as original. The “dot” pattern on these cones is slightly more pronounced which you can see up close. I have sold MANY of these kits, and MANY woofers using these kits, and everyone has been extremely happy with their performance. These spiders are initially stiffer than the tan ones, so they do take a few hours to break in, however the x-max is identical. If you prefer the stock looking spiders, message me when you buy them and I’m happy to put those in instead. Kits include everything in the picture. Shims available on request. Also included is a sheet of tips and suggestions from decades of experience, along with my personal phone number should you have an issue. If you have any questions, or want a specific bunch of parts put together for you, let me know. I’m here to help and happy to put together any combination of parts you need. 20+ years on Ebay, selling mostly speaker related stuff, and mostly Cerwin Vega, with 100% positive feedback. Will be packed securely and shipped promptly. Thanks!
-
12″ 4 Ohm Recone Kit for Cerwin Vega 121-4 L121-4 W121-4 woofer D5 + many models
Recone kit for the Cerwin Vega 121-4 L121-4 and W121-4 woofer. Red over gray foam like original. Kits include everything in the picture, all the glue and epoxy, and pack of 4 shims for tight accurate shimming. NOTE: If you have the W121-4 woofer (280se), that woofer takes a different voice coil and dustcap, so if you need that recone kit, you can buy these, but message me when you do, and I will include the correct voice coil and dustcap for you. Also, these kits take the most commonly used 4 ohm coils that were used in those woofers. But some 121-4 woofers were made as 8 ohms with no difference in the part number. If you need 8 ohm recone kits, contact me first, but I currently do have the 8 ohm coils in stock. Also included is a sheet of tips and suggestions from decades of experience, along with my personal phone number should you have an issue. If you have any questions, or want a specific bunch of parts put together for you, let me know. I’m here to help and happy to put together any combination of parts you need. 20+ years on Ebay, selling mostly speaker related stuff, and mostly Cerwin Vega, with 100% positive feedback. Will be packed securely and shipped promptly. Thanks!
-
12″ 4 Ohm Recone Kit for Cerwin Vega VS120 VS-120 VSW12 woofer
Recone kit for the Cerwin Vega VSW120 VSW12 woofer. Red over gray foam like original. All new high precision voice coils, on ALUMINUM formers like the originals. Cerwin used aluminum formers for a reason. They are stronger and dissipate heat better than kapton, which is what everyone else uses in their kits these days. Several years, and more recones than I can count went into developing these to provide kits that not only take the pounding that I know you’re going to give them, but also match the t/s parameters of the originals. These cones are pressed rather than pulp, so they are thinner but more dense, and retain the same mass as original. Kits include everything in the picture. Shims available on request. Also included is a sheet of tips and suggestions from decades of experience, along with my personal phone number should you have an issue. If you have any questions, or want a specific bunch of parts put together for you, let me know. I’m here to help and happy to put together any combination of parts you need. 19 years on Ebay, selling mostly speaker related stuff, and mostly Cerwin Vega, with 100% positive feedback. Will be packed securely and shipped promptly. Thanks!
-
Cerwin Vega 15″ Speaker Foam Surround Repair Kit DX9 RE38 VS15- MX400 UK ship
These foams are designed for refoaming the angle attach cones that used the thin lip flat attach foam. These foams are not for the flat attach cones, the ones that have the flat lip on the edge of the cone, like the D9.
-
12″ 4 Ohm BLUE CONE Recone Kit for Cerwin Vega 122s4 woofer S1
Recone kit for the Cerwin Vega 122S4 woofer. Blue cones with red over gray foam like original. Kits include everything in the picture. Shims included. Note on ohms. These kits include the 4 layer 4 ohm coils originally specified.
-
12″ 4 Ohm BLUE CONE Recone Kit for Cerwin Vega 122w4 woofer 12tr 12t R-123 312
Recone kit for the Cerwin Vega 122W4 woofer. Blue cones with red over gray foam like original. Kits include everything in the picture. Shims included. Note on ohms. While everyone else lists 8 ohm recone kits for these woofers, they’re wrong.
-
12″ 4 Ohm Recone Kit for Cerwin Vega CVW12 woofer E312
Recone kit for the Cerwin Vega E312 CWV12. Red over gray foam like original. Kits include everything in the picture. Shims available on request. Also included is a sheet of tips and suggestions from decades of experience, along with my personal phone number should you have an issue. If you have any questions, or want a specific bunch of parts put together for you, let me know. I’m here to help and happy to put together any combination of parts you need. 22 years on Ebay, selling mostly speaker related stuff, and mostly Cerwin Vega, with 100% positive feedback. Will be packed securely and shipped promptly. Thanks!