These are four ohm, just like your blown one. These are also much beefier units. Timbre on these is identical to the original, so your speakers will sound like they are supposed to. The only difference sound wise, is that due to the larger coil and larger magnet, these will be slightly louder than your originals.
Item Tag: Brew City Audio
-
15″ Refoam + spider Kit for Cerwin Vega 217r and many HED models, options
I can customize this kit if desired. As pictured, it is designed to repair the woofers on speakers like the 1st version 217R with the 153 woofer which had gray foam, tan gaskets, and plain dustcaps, and was mounted inside the cabinet. There was also a very different second version of the 217R which had one tweeter instead of two on the front. Most of the woofers in these old-but-gold speakers seem to be needing spiders, so this kit includes new spiders, and the tan gaskets they used on the “inside mount” woofers. This kit will fit most woofers that used the flat attach foams, however Cerwin made many design variations and part substitutions with their speakers, and Heppner (the company that built the woofers for cerwin vega) did the same. So, going by speaker model, and/or woofer model, isn’t always enough. The BEST way to verify parts and fitment, is to check with me, and I will probably ask for pictures. Some steel framed woofers used a taller spider. And a picture will let me know. If you prefer red (red over gray actually) foam, let me know and I’ll substitute it for you. If you prefer dustcaps with the logo, let me know and I’ll put those in instead. This kit comes with 3035 glue for the foams, black glue for the dustcaps, and epoxy for the spider. Also included is a sheet of tips and suggestions from decades of experience, along with my personal phone number should you have an issue. If you have any questions, or want a specific bunch of parts put together for you, let me know. I’m here to help and happy to put together any combination of parts you need. 20+ years on Ebay, selling mostly speaker related stuff, and mostly Cerwin Vega, with 100% positive feedback. Will be packed securely and shipped promptly. Thanks!
-
15″ 8 Ohm Recone Kit for Cerwin Vega 158EM 158-EM woofer (V-34)
Recone kit as pictured for the Cerwin Vega 15″ 158EM woofer which I believe was used in the V-34 cabinets and others. The cone throat will need to be slightly enlarged for the 3″ voice coil. @0 plus years on ebay selling mostly Cerwin Vega parts and kits with 100% positive feedback. Will be packed securely and shipped promptly. Thanks!
-
New replacement tweeter diaphragm for Cerwin Vega XLS CLS CLSC TWH25b TWTH
New replacement aftermarket tweeter diaphragm. Fits most XLS CLS and CLSC tweeters including the Logic by Vifa variety used in some. Comes with instructions, and a fuse bulb to protect your new tweeter. If you’re reading this, you know that the tweeters in these series were a weak point, partially because of the relatively low crossover point of the XLS crossover, so my new replacement diaphragms come with a SK3 fuse bulb, the same kind used in pro audio speakers, with soldered connectors that fit your new diaphragm, and speaker wiring. Note, this listing is for a diaphragm to repair your tweeter, not the entire tweeter. These diaphragms fit the magnets with two or four centering bumps on the magnet. I just found out that some of the TW25E tweeters used in the CLS15 may have three centering bumps on the magnet. These diaphragms will NOT fit those tweeters if the three centering bumps on your magnets are in a triangular pattern with the three alignment pins equidistant from each other. As of 6-23 I see another seller has similar looking tweeter diaphragms listed for these tweeters now. They won’t fit. There are MANY diaphragms that all look similar, but they won’t fit the alignment pins on your tweeters and have incorrect size spade lugs. The alignment pins (nubs on the magnet) are what center the voice coil in the gap. 20 years on Ebay, selling mostly speaker related stuff, and mostly Cerwin Vega, with 100% positive feedback. Will be packed securely and shipped promptly. Thanks!
-
12″ foam for Cerwin Vega RW12D plus cap, shims, gasket for efel
Cerwin Vega 12″ foam, dustcap, shims, and gasket for RW12D woofer.
-
Re-spider repair kit for Cerwin Vega Fits almost every 12″ with 2″ coil
Re-spider kit for the 12″ woofer. Red over gray foam like original. Includes a 4 piece shim pack, and everything else pictured. This will fit 99% of Cerwin 12″ woofers that use the common 2″ voice coil. If you have a woofer like the 121-4 which uses a 1.5″ voice coil, I have the spiders for that too. Just message me when you buy, and I’ll make sure to put that spider in your kit. This kit is enough for 1 speaker. This kits has the 3.75″ dustcap. If you need the 4.5″ dustcap, let me know and I’ll pack that one. If you need a kit for a 15″ woofer let me know. If you aren’t sure if this will fit your woofer, let me know what woofer you have and we will make sure. Some speakers came with different woofers, and many speakers have had woofers swapped out over their lifetimes, so popping the woofer out and getting the model off the woofers is the best way to verify, rather than speaker model. Also included is a sheet of tips and suggestions from decades of experience, along with my personal phone number should you have an issue. If you have any questions, or want a specific bunch of parts put together for you, let me know. I’m here to help and happy to put together any combination of parts you need. 20+ years on Ebay, selling mostly speaker related stuff, and mostly Cerwin Vega, with 100% positive feedback. Will be packed securely and shipped promptly. Thanks!
-
15″ DVC! Dual 4 ohm recone kit for Cerwin Vega DCW15 DC15 1515
These are the correct DUAL VOICE COIL recone kits for the DCW15 woofer used in the DC15 and 1515 Cerwin Vega speakers. Up till now, all the kits listed for these woofers all used the DLP (dual lead parallel coils, which are different. ).
-
10″ Recone Kit for Cerwin Vega RE25 RE-25 REW10 W10-4 4 ohms
10″ 4 ohm recone lit for the models listed. Kits include everything in the picture including 4 piece shim kit which allows accurate shimming of any coil. It is a slight color/dot distortion from the mold.
-
Cerwin Vega 12″ Speaker Foam Surround Repair Kit AT VS D DX LS Angle
These foams are slightly different, and done that way by painstaking research and design. If you’re familiar with refoaming Cerwins, you’ve undoubtedly seen where the ID of the foam is just slightly too large, so when you’re done, you can see a little of the old glue ring inside your new foam, leaving a sloppy look.