NEW TEAC X-1000, X-1000M, X-1000R REPLACEMENT PINCH ROLLER Brand new, manufactured within the last 3 months. Please be sure this is the item you need before ordering. Ships same or next day depending upon time order is placed.. Performs well. Packed well for safe delivery. Not returnable if damaged or tampered with. Note: USPS delivery is delayed in certain areas. Your package will be scanned at the Post Office when shipped. Once the package is in USPS possession I have no control over delivery time. Thank you for your understanding. Thanks for looking! I appreciate your business! I am usually available for any questions you may have. ST-T
Item Tag: Buyer
-
AMPEX Reel-to-Reel Tape Recorder Pinch Roller Part # 4045017-10 NOS
AMPEX Reel-to-Reel Tape Recorder Pinch Roller Part # 4045017-10 NOSoriginal AMPEX part1″ diameter0.375″ thickness0.18″ shaft opening diameter 🙂 PLEASE LOOK AT THE PICTURES FOR MORE DETAILS (:FEEL FREE TO CONTACT ME IF YOU HAVE ANY QUESTIONS IF YOU BUY MORE THAN ONE ITEM ON MY AUCTION PLEASE WAIT FOR COMBINED INVOICEOnce your item has arrived, please post positive feedback and I will know your item has arrived safelyOnce receiving feedback, I will post a positive for you also. I await these feedbacks so I know this transaction is complete and you are a satisfied buyerIF YOU ARE NOT SATISFIED, PLEASE EMAIL ME FIRST BEFORE LEAVING FEEDBACK ! I always try and work with everyone to make sure you have a pleasant experience with my auctionsTHANK YOU
-
AKAI PR-1 PINCH ROLLER TIRE 150, 1721 1722, 4000 series (Hub O.D. 1.25″) PRB
AKAI PR-1 PINCH ROLLER TIRE 20494 150, 1721 1722, 4000 series (Hub O.D. 1.25″) O.D. 1.575″I.D. 1.2235″C.S. 0.423Wall 0.17575 PLEASE MEASURE CORRECTLY BEFORE ORDERING. DO NOT ASSUME THIS TIRE WILL FIT. AKAI made two versions of pinch roller 20494. Both versions had the same outside diameter. Both fit the same shaft, but the diameter of the aluminum hubs that the tires were mounted to are different. Brand new, manufactured within the last 3 months. Please be sure this is the item you need before ordering. Ships same or next day depending upon time order is placed.. Performs well. (See Pics). Packed well for safe delivery. Not returnable if damaged or tampered with. Note: USPS delivery is delayed in certain areas. Your package will be scanned at the Post Office when shipped. Once the package is in USPS possession I have no control over delivery time. Thank you for your understanding. Thanks for looking! I appreciate your business! I am usually available for any questions you may have.
-
Pioneer Light Replacement Kit w/ White LEDs Model SX-450 Receiver Lamp Bulbs
Up for sale here is this complete replacement lighting set for the Pioneer SX-450. You will receive: Three (3) warm white LED wedge lamps (for the tuning dial light diffuser) Two (2) wired 4mm warm white LEDs (for the power light & FM stereo light) These are top-quality bulbs, and are the exact same ones I use when I rebuild Pioneer gear. These are top-of-the-line lights–I love using them! The warm white LED wedge lamps will give a nice clear white glow–they’re a little brighter than the original incandescent bulbs. The LEDs will last forever and will run much cooler than the original incandescent bulbs, so they won’t damage the vinyl case covering the way incandescents can. If you want this kit with all incandescent lamps instead, I have that kit available here. You will need a soldering iron, wire cutters, needlenose pliers, and a Philips screwdriver. Be very careful not to damage the tuning dial cord when you’re soldering! If you wrap the dial cord in aluminum foil ahead of time, that will help protect it. In order to replace the original soldered-in dial diffuser bulbs with the wedge LEDs, you can either just solder them to the old wires, or you can pull the bulbs out of the plastic wedge mounts and solder directly to the wires–that’s what I do. I have kits for most other Pioneer gear listed, just take a look at my other listings. Please see my pictures for details. US shipping and handling is $5, and international is $18, no matter what quantity you buy. All my small parts are set up for combined shipping, so just use the “add to cart” feature and then check out all at once, and it will combine shipping. If you have any questions, please ask. Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new power cords, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, new 630v yellow film capacitors at 13 different values, a large variety of transistors for vintage stereo repair, and more. Just use “add to cart” on everything you want and then check out for combined shipping.
-
Pioneer Equipment Badge Logo Gold Incised Plastic SMALL 36mm x 6mm
These badges are made of 1/16″ thick gold and black laminated plastic and have been custom cut by a CNC machine. Each badge measures approximately 36mm long and 6mm tall (1-3/8″ x 1/4″). They can be attached to your equipment using any type of glue or adhesive of your choosing (not supplied with the badges). The price listed is for one badge as shown. Free domestic shipping via USPS First Class mail (stamped envelope – no tracking) or choose USPS First Class small package if a tracking number is desired. International shipping via USPS First Class international letter (no tracking) is $2.00.
-
1967 United States Telephone Company heavy Rotary Phone MODEL US 4 – JAPAN
I RECENTLY PURCHASED A FEW TELEPHONE RELATED ITEMS AT AN ANTIQUES MARKET AND WILL BE SELLING EACH ITEM INDIVIDUALLY. THIS IS A VERY NEAT TELEPHONE AND IS QUITE HEAVY FOR ITS SIZE. THE SERIAL NUMBER IS 20094. IT WAS MANUFACTURED IN JAPAN FOR THE UNITED STATES TELEPHONE COMPANY. THE CORD IS CUT AND THE MOUTH PIECE IS LOOSE. I AM SELLING THIS AS IS TO BE RESTORED, PLEASE SEE PHOTOS. THANK YOU FOR LOOKING! I WOULD LOVE FOR THIS TO GO TO A GOOD HOME!!!!! THANK YOU FOR LOOKING AND PLEASE CHECK OUT MY EBAY STORE WITH OVER 800 COLLECTIBLE ITEMS. ALL REASONABLE OFFERS ARE WELCOMED THRU EBAY!
-
MC Step-up Transformer Unit with Hashimoto HM-3: for A Tec, Orto, Denon, Koetsu
MC cartridge step-up Transformer Unit Step-up Transformer Hashimoto HM-3 x 2 Frequency Response (-1dB): 15Hz to 50KHz Gain/Turn Ratio 26dB / 20:1 (in Serial) Gain/Turn Ratio 32dB / 40:1 (in Parallel) Input impedance with Output load of 47kΩ 118Ω (in Serial) 29.4Ω (in Parallel) Return Signal Line Not Grounded Compatible MC Cartridge Detail to be referred to attached photo. Audio Technica, Ortofon, Lyra, Koetsu, Sumiko Bentz Micro, Transfiguration, Denon, Dynavector
-
Apt Holman Preamplifier One COMPLETE Rebuild Kit High-Quality Preamp Recap Set 1
Up for sale here is this complete recap kit for the Apt Holman Preamplifier One. The old parts are weak and failing. We will make them new again! This kit includes replacements for all electrolytic caps in the Preamplifier One. There are 8 Nichicon PW caps, 27 Nichicon KL capacitors, and two Panasonic film caps, for a total of 37 capacitors. These are all high-quality brand new genuine parts, the same parts I use when I rebuild vintage gear. The original axial 22 uf caps are replaced with radial Nichicon KL caps, which are the best ones for those spots. I normally prefer to replace axial caps with new axials, but the Nichicon KL are just too good not to use. I will include instructions, but this is a moderately complicated rebuild, though it’s not too bad, and you should know what you’re doing and have a decent soldering iron and a dim-bulb tester with a 40W, 60W, or 100W incandescent bulb. The Apt Holman Preamplifier One frequently will have issues with transistors, so I would recommend picking up some KSA992s and KSC1845s here if you don’t already have them–the original 2N3904 and 2SC1345 transistors can be replaced with KSC1845 and the original 2N5087 and 2N3906 can be replaced with KSA992. I do not include these in the kit because replacing these transistors can sometimes change the sound, so it’s not always a good idea to replace all of them. US shipping and handling is $5, and international is $18. If you want to combine shipping with my other items, just use the “add to cart” feature and then go to your cart and click “request total from seller” and I will send you a combined invoice. If you have any questions, please ask. Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new power cords, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, new 630v yellow film capacitors at 38 different values, new 1200v yellow film capacitors at 15 values, a large variety of transistors for vintage stereo repair, new Wima film capacitors for stereo repair, new 250v yellow film crossover capacitors, and more. Just use “add to cart” on everything you want and then check out for combined shipping.
-
10 New Warm White Axial LED Wired 8V Lamps Vu Meter Light Bulbs (Qty Avail)
Up for sale here is this set of 10 new 8v axial warm white LED light bulbs. These are perfect for replacing any of the 6v-8v axial lamps found in vintage gear. They will get just as bright as the old ones. Specs: Voltage: 8v AC/DC (they will work fine at 6.3v, 7v, or 8v) Current Draw: 10mA Color: Warm White Body Length: 19mm Body Height: 6mm Wire length: 25mm per wire Total Length: 69mmPolarity: Non-polar These are brand new bulbs and are guaranteed to work great for you. These bulbs are generally used for meter and tuning dial illumination, not for stereo beacons, tuning needle lights, or source selector lights. I have other bulbs listed, including incandescent axial lamps and LED fuse lamps, so if you need those, take a look at my other listings. Please see my pictures for details. US shipping and handling is $5, and international is $18, no matter what quantity you buy. All my small parts are set up for combined shipping, so just use the “add to cart” feature and then check out all at once, and it will combine shipping. If you have any questions, please ask. Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new power cords, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, new 630v yellow film capacitors at 13 different values, a large variety of transistors for vintage stereo repair, and more. Just use “add to cart” on everything you want and then check out for combined shipping.
-
Sony ICF-2010 ICF-2001D Full Repair Kit + 2sk152 Made In Japan + Service Manual
With Radio age, Capacitors dries up or leaking, even if they appear In good condition, Then all need a change. Sony ICF-2010 ICF-2001D Full Repair Kit + Service Manual for Fix, Update, Upgrade & Protect your Radio. Service Manual Will be Sent Via Email All PARTS ARE ORIGINAL AND NEW. All Capacitors Are Panasonic, Nichicon & Rubycon Made In Japan. Rubycon AX Radial Lead Capacitors The Same Brand Sony Are Using The Red Capacitors 0.1uf and 2.2uf Are Wurth Elektronik Germany Two Original Sony Made in Japan {2SK152-2,3 Or 4} Transistors FET Mosfet N-Channel TO-92 For Q302 & Q303. One Year Manufacturer Warranty for each brand.Please If you Are Unsure About How You Change the Capacitors. Please refer to a qualified electronic technician or contact us, we can do it for you. Capacitors & Other Components List : REF # Qty C19-312-702 —————————————— 3C31-40-89-106-122-135-306-311-401 ————9C36-100 ————————————————- 2C45-48-87-95-305 ————————————-5C68-139- 162 ——————————————3C72-82-84-103 ————————————— 4 C76-77-78-88 —————————————– 4C99-116- 156-159 ————————————4C102-605-615——————————————3C160-301 ———————————————–2c161 ——————————————————1C164 —————————————————–1C90——————————————————-1C703 —————————————————–1 Q303-302 ———————————————- 2 White Led Light ————————————– 1Resistor For Led ————————————-1protective diodes ——————————————– 4 Radio is not included.