CAPSTAN DRIVE BELT FOR TASCAM MODELS488, 488MKII, 644, 688NEW FRESH STOCK USA FREE SHIPPING WITH TRACKINGPICKUP IS NOT AVAILABLE
Item Tag: Does Not Apply
-
6pcs Germanium Transistor NPN MP38A ~ 2SD195, 2SD33, OC75 Tone Bender USSR
Vintage Germanium NPN transistors MP38A These transistors was used in the low frequency power amplifiers, electronic music instruments and other devices. Similar to the 2SD195, 2SD33, OC75, 107NU70 Lot for 6 transistorsElectric parameters:Transition frequency 2MHz Power dissipation 0.15W Collector-base voltage 15V Collector-emitter reverse voltage 15V Maximum collector current 20mA Collector capacitance 50pF Forward current transfer ratio (hFE) 45-100 Maximum temperature 85°CNew, Old StockYou can find the other Transistors in our store: We combine multiple items to save on shipping!Shipping and HandingBuyer pays fixed shipping costs including insurance for any country. Shipping costs for this item can be found in the section Shipping and Payments. This item will be shipped to you from Europe (Ukraine) by Registered Airmail after payment is received and verified….
-
Western Electric Badge Logo Custom Made Aluminum PAIR Silver or Gold
Custom made reproduction badges for Western Electric equipment. Each badge measures 3″ by 1-1/8″ and is made of .02″ thick sublimated aluminum Double sided tape is on the back for easy application to any surface. Silver is the standard color and will be shipped unless you include instructions with your order that you prefer the gold version. If you’d like one badge in each color that is also available. Domestic shipping via USPS Ground Advantage. International shipping will be handled by eBay’s International shipping service.
-
Dynaco Speaker Badge Logo Emblem Custom Aluminum PAIR
Custom made replacement speaker badges for vintage Dynaco speakers. These are made of .02″ sublimated satin gold aluminum and come with double-sided tape on the back for easy attachment to any surface. They measure approximately 1-3/16″ by 5/16″ (30mm x 9mm) as shown. The price is for one pair (two) identical badges. Free domestic shipping via USPS First Class mail (stamped envelope – no tracking) or choose the alternative shipping method available if tracking is desired. International shipping via USPS First Class international letter (no tracking) is $2.00.
-
Neumann Badge Logo – Custom Made Thin Aluminum
Made from .02″ thick sublimated matte silver aluminum each badge measures approximately 15/16″ (24mm) on each side and 1.3″ (33mm) diagonally. Full coverage double sided adhesive is on the back for easy installation. Listed price is for one badge as shown. These badges are a thinner, more flexible version (.02″ thick versus .047″) of the same badge I have available for turntables. Free domestic shipping via USPS First Class mail (no tracking) or choose the alternative shipping method available at checkout if a tracking number is desired. International shipping via USPS First Class international letter (no tracking) is $2.00.
-
Dynaco Speaker Badge Emblem Logo Name Plate Pair Custom Made
Please Read The Entire DescriptionFree Shipping Does NOT Include Tracking Each badge is hand made with premium 1/16″ plastic, measure approximately 1-3/16″ long by 5/16″ tall, or 30mm x 9mm, and have a permanent mat black and brushed gold finish. Each badge comes with an adhesive backing already applied. Just peel off the back, and it’s ready to apply. This listing is for two (2) replacement badges. Free shipping is through USPS First Class stamp mail, and there is no tracking. If you would like tracking, please select USPS Ground Advantage, and you will need to pay for shipping.
-
Pioneer Speaker Badge Logo Pair Gold Incised Plastic for CS Series and Others
These badges are made of 1/16″ thick gold and black laminated plastic and have been custom cut by a CNC machine. Each badge measures approximately 2-3/16″ long and 3/8″ tall. They can be attached to your speakers using any type of glue or adhesive of your choosing (not supplied with the badges). The price listed is for two identical badges. Free domestic shipping via USPS First Class mail (stamped envelope – no tracking) or select the tracked shipping alternative available at checkout if a tracking number is desired. International shipping via USPS First Class international letter (no tracking) is $2.00.
-
Dual Turntable Badge Logo For Dust Cover or Plinth Custom Made Aluminum
Replace the missing Dual logo on your turntable or add one to the plinth with this sublimated .02″ satin silver aluminum replacement. It measures 19mm x 19mm (approx 3/4″) square. It was modeled after a badge used on the base of many early Dual turntables. Double sided adhesive on the back for easy installation. Listed price is for one badge as shown. Free domestic shipping via USPS First Class mail (stamped envelope – no tracking) or choose USPS First Class small package (with tracking) for $4.00. International shipping via USPS First Class international letter (no tracking) is $2.00.
-
Garrard Badge Logo for Turntable Base Plinth – Custom Made Aluminum
Dress up your classic Garrard turntable with this custom made badge. Made from .047″ thick sublimated matte silver aluminum it measures approximately 2″ by 1/2″. Double sided adhesive is on the back for easy installation. Listed price is for one badge as shown. Free domestic shipping via USPS First Class mail (stamped envelope – no tracking) or choose USPS First Class small package for $4.00 if a tracking number is desired. International shipping via USPS First Class international letter (no tracking) is $2.00.
-
Pioneer SX-1250 SX-1050 SX-950 SX-1010 Base Mount for Bar Antenna Holder W72-092
Manufactured here in Minnesota with Delrin Acetal High Quality Product. Comes as one unit consisting of 7 parts. If you are doing a restoration of one of these units.. SX-1250 1050 950 828 1010 and QX-949 9900 and TX-9500 9100 8100 1000 or TX-800 or others! This may finish off your restoration project insuring that this part looks and preforms as it should. Although your prized unit may have this part and it may appear to be ok. We encourage you to look at it closely with a light and a magnifying glass. You may see stress cracks and the steel swivel pivot arm could have rust and decay. The steel swivel pivot arm is manufactured to specs using high quality Stainless Steel. The Adjustment Cap that is on the rear has been manufactured with more material and the slot is deeper so that you can adjust the tension on the Antenna Bar without damaging the cap. The spring is an exact duplicate of the original and the tension is the same or exceeds the original part. The inside plastic pieces made of Delrin hold the spring in place and prevent it from doing damage to the other inside parts. Installation is simple. Take out the 4 screws on the old part your replacing then put the new part on using your existing screws. On the top of the old swivel shaft there is a small screw, remove it slide your existing Antenna Bar & Holder on to the shaft of the new swivel and attach the new screw provided…and adjust to the position desired. Again, this is a new remanufactured part that is guaranteed to meet or exceed the specifications of the part you are replacing. Please review the photos carefully and contact us with any questions before purchase. Parts could fit other different Application’s and Receivers. Do your homework. We do not guarantee it will fit your particular receiver. (((Part itself is Guaranteed!))) Contact for return must be with in 30 days of purchase. Only eBay Global Shipping Program is used for all orders shipped outside the United States. Buyer pays for shipping back to United States, regardless of reason for return. Guarantee is void if damaged or tampered with. Part will be marked to prevent part swapping. Sale is only for the part listed only. Feedback is reciprocated after receiving usually with in 30 days. Photos may not always be of the exact part being sold due to many items pictured being sold at one time.