The secondary can be go to a single ended tube or used to drive push-pull tubes, also having a center tapped secondary. Bias can be applied on this center tap. The output impedance for SE or P-P is a result of the drive tube loading and primary waveform motion.
Item Tag: Electra-Print
-
Electra-Print SE Output Transformer/s 5K primary, 60ma, to 8 0hms, New Design
SE output transformer/s 5K primary, 60ma, to 8 0hms Designed and Built by Electra-Print audio. A new design offering a, non-interleaved primary, for full flux intensity to two paralleled, phased secondaries!! offering more power coupling and able to match a wide range of primary tube load impedances, from 4K to 7K its, center design is 5K. Gapped for 60ma nominal -1db low end. full music bandwidth. Lower IMD due to no secondary interleave flux interference of one full primary winding and also offers an increased power capability.
-
Electra-Print Solid Silver Secondary, Single Ended Output Transformers
These are wound to accommodate many popular plate loads. 4K to 7K primary and 6 ohm secondary of 2.6oz 99 % solid silver for 4 and 8 ohm load. plate current max (Idle 35-40ma) and up to 10 plus watts, 20 watts capable.