My Blog

Item Tag: Kenwood

  • Kenwood KM-208 Stereo Power Amplifier Powers On Untested

    As pictured nice cosmetic shape and powers on. Unable to test without a preamp.

  • Vintage Kenwood Basic M2 Stereo Power Amplifier 220WPC Sigma Drive TESTED+Cables

    Kenwood Basic M2 Power Amplifier. This unit has beenbench-tested and is in strong operational condition. Indestructible Sanken Transistors: Built using the legendary original output transistors known for their longevity and warm tonal character.

  • Kenwood KM-993 Stereo Power Amplifier

    For Sale is a Kenwood KM-993 Stereo Power Amplifier. This unit is in good working condition. Power output: 150 watts per channel into 8Ω (stereo). Signal to noise ratio: 120dB. Input sensitivity: 1V.

  • Kenwood basic M1D Power Amplifier Good Condition

    Powers on, is in good condition from what I can tell, it is missing one knob, see pictures.. It is untested in a working system. So it’s sold as-is and priced accordingly.

  • Kenwood KM-207 Stereo Power Amplifier

    This listing is for a used Kenwood KM-207 power amplifier. It was tested and workes and sounds great. No international shipping Thank you for stopping by.

  • Vintage Kenwood KA-87 Stereo Analog Amplifier TESTED WORKING audio Music

    I am helping an older guy at my day job move into assisted living. He asked me to sell all of his vintage audio, Nascar & NE Sports “stuff”. Please use the pics as a description as these items are outside of my usual wheelhouse (military & vintage games). All proceeds from this and similarly marked sales go to him. Thanks! J. The kid at our warehouse tested this out (he’s into retro audio) to make sure it worked etc.

  • Kenwood KA-9100 COMPLETE Rebuild Kit High-Quality Amplifier Recap w/ Transistors

    Up for sale here is this complete rebuild kit for the Kenwood KA-9100. 12 transistors. Looking for more parts?. 18 transistors. This kit includes.

  • Kenwood KA-7100 COMPLETE Rebuild Kit High-Quality Amplifier Recap w/ Transistors

    Up for sale here is this complete rebuild kit for the Kenwood KA-7100. This includes all the parts you need to rebuild all the boards in the Kenwood KA-7100, and it includes new replacement main filter capacitors as well. Some KA-7100s have heat-sinks on the Q31/Q32 transistors and some do not have them. Those two resistors need to be heat-sinked, so the kit includes two heat-sinks with mounting hardware in order to properly mount the transistors. This kit includes: Power Supply: 10 capacitors (including 4 main filter caps)2 transistors11 diodes (2 zener)2 heat-sinks with hardware1 relay Amp Board: 11 capacitors6 transistors Preamp Board: 9 capacitors4 transistors Control Board: 18 capacitors8 transistors These are all high-quality brand new genuine parts, the same ones I use when I rebuild vintage gear. The capacitors are 105° Panasonic FC, Nichicon PW, Nichicon KL, Nichicon Muse, Wima film, and Nichicon VR (for the main caps) at the correct uf and the same or improved voltage ratings, the transistors are Fairchild/OnSemi, and the relay is a new Omron relay. I will include surprisingly well-written instruction sheets, but this is a fairly complicated rebuild, and you should know what you’re doing and have a decent soldering iron, a little heat-sink compound, and a dim-bulb tester with a 100W incandescent bulb. Please see my pictures for details. US shipping and handling is $10, and international is $28. If you have any questions, please ask. Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new power cords, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, new 630v yellow film capacitors at 13 different values, a large variety of transistors for vintage stereo repair, and more. Just use “add to cart” on everything you want and then check out for combined shipping.

  • Kenwood KR-5150 Complete Rebuild Kit High-Quality Recap Caps Transistors

    Up for sale here is this rebuild kit for a Kenwood KR-5150. This includes all the parts you need to rebuild a Kenwood KR-5150, and includes upgraded replacement main capacitors. This does not include new lights, fuses, or any amp board resistors. This also does not include the output transistors, but I do have replacements for those available separately. This kit includes the following: Power Supply: 3 capacitors Main Amplifier/Tone/Phono Board: 40 capacitors (Nichicon PW, Panasonic FC, Wima film) 9 transistors (Fairchild/Onsemi) Chassis/other:3 main capacitors (Epcos 3300 uf 100v, same diameter as the old ones) 1 chassis-mount transistor (Fairchild/Onsemi)1 resistor (for lighting) Instructions No tuner parts are included–if your tuner is working fine now, just leave it alone. These are all high-quality brand new genuine parts. These are the same parts I use when I rebuild Kenwood equipment. I will include a surprisingly well-written instruction sheet, but rebuilding a receiver is fairly complicated, and you should know what you’re doing and have a decent soldering iron and a dim-bulb tester, as well as a little heat-sink compound. This kit may not fix your Kenwood, but it’s fairly likely that it will, and it will definitely help it run better. Please see my pictures for details. US shipping and handling is $8, and international is $28. If you have any questions, please ask. Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new power cords, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, new 630v yellow film capacitors at 38 different values, new 1200v yellow film capacitors at 15 values, a large variety of transistors for vintage stereo repair, new Wima film capacitors for stereo repair, new 250v yellow film crossover capacitors, and more. Just use “add to cart” on everything you want and then check out for combined shipping.

  • Kenwood Badge Logo Emblem PAIR Speakers, Amps, Turntables Custom Made IN USA🇺🇸

    These are custom made with premium sublimated 1/16″ plastic, and professionally engraved. Each badge measures approximately 1.75″ by .25″ (45mm x 7mm) and has a permanent mat black and brushed aluminum finish Each badge comes with an adhesive backing already applied. Just peel off the back, and it’s ready to apply. This listing is for two (2) replacement badges. Custom orders and different colors are available upon request Free shipping is through USPS first class mail, and there is no tracking. If you would like tracking, please select USPS First Class, and you will need to pay for shipping.