My Blog

Item Tag: Money Back

  • BIC TURNTABLE PART FOOT USED ON BIC WB 20 WOOD BASE FOR THE BIC 980 960 940

    BIC 1000 981 980 960 940PLINTH / BASE FOOT FOR BIC –WB 20 BASE 1000 981 980 960 940CLEAN – LIGHTLY USEDCOMES WITH FIXING SCREW On Nov-30-08 at 13:36:34 PST, seller added the following information: 100% guaranteed–if not 100% happy return in 30 days for a full refund Please e-mail any questions See our other auctions for vintage audio and hard to find turntable/speaker parts. Thanks again for looking and happy bidding! BID WITH CONFIDENCE Check our feedback We know how to pack & ship 43 years repairing/restoring turntables The turntableexperts Track Page Views WithAuctiva’s Counter

  • BIC HIGH FIDELITY COMPONENTS FOR 1980/81 ORIGINAL PRODUCT BROCHURE J0468

    BIC HIGH FIDELITY COMPONENTS FOR 1980/81 ORIGINAL PRODUCT BROCHURE J0468.GOOD CONDITION USED ORIGINALNO MAJOR BENDS OR CREASINGSOME MINOR STAINING ON PAGES SOME MINOR ABRASIONS, SPOTTING, MARKING, AND SCUFFING BUT DOES NOT AFFECT READABILITYPLEASE NOTE THAT WE DO NOT ACCEPT OFFERS AS ALL PRICES ARE FINALPLEASE CONTACT US WITH ANY QUESTIONSTHANK YOU FOR LOOKING AT THIS LISTING 🙂

  • BIC 960 Turntable Parts – Rubber Bushing (1)

    Available is a rubber bushing from a BIC Model 960 turntable that is in very good condition. It measures 0.5″ height and 0.6″ diameter. What’s included is what is pictured.When there is more than one available, the one you receive may not be the one pictured but will be of equal or better condition. We ship internationally through eBay’s Global Shipping Program. For the Global Shipping Program, we can only specify the cost of shipping to the shipping center. The shipping center specifies the international shipping (including import charges and fees) for delivery to the buyer. The combined shipping cost (domestic + international) is what is displayed in the listing. When possible we will combine shipments and refund any excess shipping costs paid.

  • Turntable Belt for BIC 1000 1403 911 912/C 914/C 916-MP 15.2

    We ship Monday through Friday. Our business is closed on Saturday and Sunday. You are not just buying a belt. You are buying 30 years of experience in electronics and stereo equipment as well as my 20 years of experience on ebay. I stand behind all that I sell with that experience. Don’t be fooled by others that have copied my auctions. They can never copy the quality of my belts or my customer service. I have built my business on these qualities. “Providing the best quality replacement belt for you and your turntable is my goal. I want you to be happy with your purchase for years. Repeat business is how I have grown my business. I look forward to serving you.” — VintageAudioForYouTooThis is a Brand new PRB belt, not old stock. PRB is the best known modern belt supplier in the world. They meet or exceed original OEM specifications. You are bidding on one new replacement belt. Original belts for your turntable are long gone. If I could even find original belts, I could not, in good conscience, sell them. You are talking about a 25 – 40 years old belt. With today’s manufacturing processes and components, a state-of-the-art belt can be made. The long-term elastic characteristics of modern belts ensure stability for years to come.Belt Compatible with – BIC 1000 1403 911 912/C 914/C 916-MP Apologies to my Canadian Friends – USPS price changes have more than doubled the cost to Canada for 1st class envelope/package. Believe me, it irritates me as much as it does you.Please Click on the link below for a video on how to replace a turntable belt. Note: This shows replacement on a generic turntable, not your specific model, but it will be similar for all Belt Driven Turntables How to Replace a Turntable BeltBASIC INSTALLATION: Most belts are easily replaceable. It involves removing the turntable platter (usually metal and they usually just pull straight up off of the spindle). The belt is placed around the inner lip of the platter. Platter is replaced onto spindle and then, through one of the holes in the platter, reach your fingers in, grab the belt from the inner lip of the platter, and stretch the belt around the capstan or motor shaft. You are done. Some turntables are a little more involved, but most are simple. Check yours out.THE FINE PRINT and MY GUARANTEE to YOU: I am confident you will be happy with the results of your new belt. If, for some reason, you are not, simply notify me for return instructions, return the belt, and I will refund your purchase price or send a replacement belt. All of my belts are guaranteed not to be DOA. The item is shipped within 48 hours (usually 24 hours) after payment receipt. NOTE: Please realize that I mail your belt in a timely fashion, but sometimes delivery is delayed by the post office which I have no control over. 90 Day Workmanship Warranty on All Belts Belt Compatible with – BIC 1000 1403 911 912/C 914/C 916-MP NOTE: Texas residents pay state sales tax. Ebay thinks that it confuses buyers to have shipping options. Please ask me if you need expedited shipping and don’t see it offered. I offer USPS Priority Shipping and USPS Priority Express Shipping (generally overnight, but sometimes 2 day)

  • BIC 911 912/C 914/C 916-MP Turntable Belt PRB FREE SHIP

    BIC 911 912/C 914/C 916-MP Turntable Belt made by PRB. High quality and perfect fit. A good quality belt is very important for proper operation of your turntable. When installing new belt, clean motor pully and turntable platter with isopropyl alcohol. Ships same or next day depending upon time ordered. Normal delivery with USPS delays averages 3-7 days. Belts are bulk purchased and packaged by us. Our belts are guaranteed for 1 year! About Us: We are an authorized warranty repair center and service over 30 brands. Our belts are PRB brand and have been manufactured within the last 90 days. We never sell old stock or Chinese belts. A cheap belt not made properly can cause wow and flutter issues. The belts we sell are the same belts we use for our warranty and out of warranty repairs. Questions? I usually answer within a half hour during the day! I appreciate your business!!

  • 10 NOS Vintage Brown 8-Pin Octal Vacuum Tube Sockets PC BOARD MOUNT PCB

    Up for sale here is this set of 10 NOS vintage brown 8-pin octal PC-board-mount tube sockets. These are nice vintage unused Made in USA sockets, most likely from the 1960s. I believe these were made by Cinch but I don’t know for sure. Each has a letter “N” stamped on the bottom. These are brand new and are guaranteed to work great for you. I have measurements in my pictures, but they are 25mm (right around 1″) in diameter at the top and slightly wider at the bottom. Height is about 9/16″ not including the pins, and 7/8″ with the pins. Please see my pictures for details. US shipping and handling is $5, and international is $18, no matter what quantity you buy. All my small parts are set up for combined shipping–just use the “add to cart” feature, then check out at once to receive the combined shipping discount. If you have any questions, please ask. I have more sockets and other vintage electronics listed–feel free to take a look!

  • (1) VINTAGE CONTROL KNOB BROWN /Alum FACE ~ 7/8″ Dia 3/4″ Height, 1/4″ Shaft

    VINTAGE BROWN CONTROL KNOB WITH POINTER 1/4″ Shaft7/8″ Outside Diameter3/4″ Height Double Set ScrewsAluminum Core, Plastic body, Aluminum face SHIPPING IS FREE AFTER THE FIRST! Use the CART feature if buying items from more than one of my listings. QUANTITY:This sale is for a lot of ONE (1) Unit. SHIPPING:Domestic buyers pay just $5.00 for shipping and handling on the first item.There is no shipping charge for additional qualified items.International buyers pay just the amount determined byeBayItems will be carefully packed and shipped quickly. USE THE CART FEATURE TO COMBINE THE SHIPPING WHEN BUYING MORE THAN ONE OF MY ITEMS OR FROM MORE THAT ONE OF MY LISTINGS.Condition:NOSOriginal packaging is not included.These are New Old Stock from an estate buy-out.They have been stored loose for decades and therefore may be dusty and have some minor scuffs and scratches.Photos are representative of typical item condition. Other Items:I have several other vintage electronic components listed on eBay. Have a look. Returns:I will accept domestic returns if item is not as described in ad. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Please Note:In my photos and my description,I have attempted to show all known information as accurately as possible.I am not a big seller, business or store.I have not attempted to conceal any flaws, defects or information.I do not intentionally deceive you (the buyer) in any way.If you are not happy with your purchase, or if you have any questions or comments about the items I am selling,please feel free to send me a note.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Thank You and Happy Shopping!MAKE AN OFFER

  • NOS Vintage Brown 8-Pin Octal PC BOARD MOUNT Vacuum Tube Socket PCB (Qty Avail)

    Up for sale here is this NOS vintage brown 8-pin octal PC-board-mount tube socket. This is a nice vintage unused Made in USA socket, most likely from the 1960s. I believe this was made by Cinch but I don’t know for sure. It has a letter “N” stamped on the bottom. This is brand new and is guaranteed to work great for you. I have measurements in my pictures, but this is 25mm (right around 1″) in diameter at the top and slightly wider at the bottom. Height is about 9/16″ not including the pins, and 7/8″ with the pins. Please see my pictures for details. US shipping and handling is $5, and international is $18, no matter what quantity you buy. All my small parts are set up for combined shipping–just use the “add to cart” feature, then check out at once to receive the combined shipping discount. If you have any questions, please ask. I have more sockets and other vintage electronics listed–feel free to take a look!

  • MC Trans HM-7 (Hashimoto/Sansui) x2 Assy Kit with AL Diecast Case and all parts

    MC cartridge step-up Transformer Assembly kit All electrical parts are including a pair of Step-up Transformers (Hashimoto HM-7) Case: Takachi TD10-15-4N with machining and painting. 2.5t (mm) Aluminum Diecast. Parts: refer to bellow BOM. Machining Made to order: It takes 30 days to be shipped after receiving order. A pair of Hashimoto HM-7 is included. (Refer to ) Qty Parts Number Manufacturer Spec CON1 1 T10 Sato Parts Terminal J1-4 4 AJ-320 Amtrans RCA Jack SW1,SW3 2 M-2042 NKK 4PDT SW2, SW4 2 M-2022 NKK DPDT Case 1 TD10-15-4N Takachi Foot 4 AFS25-10B Takachi φ25 X H10mm Screw 4 M4 T1, T2 2 HM-3 Hashimoto MC Step-up Trans.