Powers on and attempts to play tape. Reels did spin to rewind. Missing a cable. AS-IS for parts or restoration. Does not include power cable or reels.
Item Tag: REEL TO REEL
-
Uher 4000 Report Portable Reel to Reel Tape Recorder with Microphone
DO NOT KNOW IF IT WORKS. IN PRETTY GOOD CONDITION. This is a pre-owned Uher 4000 Report portable reel-to-reel tape recorder.
-
BASF LP35 LH Reel to Reel Recording Tape, Early Gen, LP, 7″ Reel, 1800 ft
BASF LP35 LH Reel to Reel Recording Tape, Early Gen, LP, 7″ Reel, 1800 ft What are refurbished tapes? First, we only select tape formulas for refurbishment that have proven to withstand the test of time and will be reliable. Tape formula and length are verified to match the box type, so you know what you are getting. All tapes have been wound, cleaned, and checked to make sure the entire length of the tape is defect free (no folds, bends, tears, splices, stretches, or oxide shedding). All tapes are bulk erased, if Priority Mail is selected. To comply with the low cost Media Mail rate requirements, tapes will be sold as pre-recorded with the content on them. All tapes are free of mold, dirt, and water damage and in good condition. Reels are placed in a plastic bag and sealed with a label once it has passed our quality control check. The package is renewed – the box is either shrink-wrapped, the RR label is affixed to the box, or an insert is placed in the box. 30 day no fuss replacement guarantee – if you find a problem with the tapes or are not satisfied for any reason, we’ll send you a replacement tape. Buy with confidence!
-
Reel to Reel Power Cord A/C Cable Replacement Teac Akai Pioneer 6′ AC POWER IN
NEW power cord for Reel to Reel players. Female end slightly modified to perfectly fit in nearly all brands of Reel to Reel tape decks. High quality cord. 6′ in length 16/2 HPNNEMA 1-1516 Gauge125V/15A/1875W SAME DAY SHIPPING IF ORDERED ON WEEKDAY BEFORE 12pm
-
Reel to Reel Power Cord Commercial Grade Cable Replacement Teac Akai Pioneer 6′
NEW power cord for Reel to Reel players.
-
Reel to Reel Power Cord A/C Cable Replacement Teac Akai Pioneer 20′ AC POWER IN
20ft Custom Power Cord – Fits 2-Prong Reel-to-Reel Tape Decks (Teac, Pioneer, Sony, Sansui). This is a practical alternative to the now-obsolete OEM cords. 20 ft length. With a full 20 feet of reach, you can place your tape deck wherever it works best—no daisy-chaining needed.
-
Pioneer RT-707 Side Rails, Solid OAK fits RT-701 too Cheeks Beautiful
Solid OAK Side Rails for your Pioneer RT-707 or RT-701 Made to exacting standards by hand in the USA using only the highest quality solid OAK. Over 150 sets sold to satisfied customers around the world. These fit perfectly, and – most importantly, will not interfere with your reels – guaranteed! The RT-707 is a gorgeous deck and looks stunning when mounted in a rack. When it’s notin a rack, it looks “unfinished” to me. The empty rack mounting holes always bothered me. One solution is to a case for the 707 but they are very expensive and it cuts down on air circulation making your deck run hotter than it should. My solution is to create these beautiful solid OAK wood side rails that are secured using the rack mount holes. Please keep in mind that wood varies in appearance. The item you get may vary slightly than the samples depicted in the ad. Dress up your Deck now. RT-707 or RT-701 – these will fit both models! Easy to mount – just slide them on and slightly tighten the screws. Takes all of a minute. What you will receive:Two (2) side rails (cheeks) made from OAK Hardwood.Four (4) stainless Steel Hex-Head screws with trim washer.Four (4) washers (for the rear).Four (4) nuts (for the rear). Rails available for other Pioneer components also.Other wood types available too. Click on “See Other Items” under Seller Info at top to check out all my listings. The PIONEER RT-707 pictured IS NOT INCLUDED!
-
Pioneer RT-707 Side Rails, Solid Black Walnut fits RT-701 too Cheeks Beautiful
Solid Black Walnut Side Rails for your Pioneer RT-707 or RT-701 Made to exacting standards by hand in the USA using only the highest quality solid Black Walnut. Over 150 sets sold to satisfied customers around the world. These fit perfectly, and – most importantly, will not interfere with your reels – guaranteed! The RT-707 is a gorgeous deck and looks stunning when mounted in a rack. When it’s notin a rack, it looks “unfinished” to me. The empty rack mounting holes always bothered me. One solution is to a case for the 707 but they are very expensive and it cuts down on air circulation making your deck run hotter than it should. My solution is to create these beautiful solid Black Walnut wood side panels that are secured using the rack mount holes. Please keep in mind that wood varies in appearance. The item you get may vary slightly than the samples depicted in the ad. Dress up your Deck now. RT-707 or RT-701 – these will fit both models! Easy to mount – just slide them on and slightly tighten the screws. Takes all of a minute. What you will receive:Two (2) side rails (cheeks) made from Black Walnut Hardwood.Four (4) stainless Steel Hex-Head screws with trim washer.Four (4) washers (for the rear).Four (4) nuts (for the rear). Many people have asked for a Mahogany version of these rails. Well, here they are!https://www.ebay.com/itm/304354193644 Same price, same uncompromising quality. Ready to ship. What customers are saying…… Feedback WOW, what a difference these made, best item ever. Black Walnut Side Rails for Pioneer RT-707 – Hand Oiled – Stainless Steel Screws (#292709812943) Rails available for other Pioneer components also.Other wood types available too. Click on “See Other Items” under Seller Info at top to check out all my listings. The PIONEER RT-707 pictured IS NOT INCLUDED!
-
Pioneer RT-707 Side Rails, Solid MAHOGANY fits RT-701 too Cheeks Beautiful
Solid Mahogany Side Rails for your Pioneer RT-707 or RT-701 Made to exacting standards by hand in the USA using only the highest quality solid Mahogany. Over 150 sets sold to satisfied customers around the world. These fit perfectly, and – most importantly, will not interfere with your reels – guaranteed! The RT-707 is a gorgeous deck and looks stunning when mounted in a rack. When it’s notin a rack, it looks “unfinished” to me. The empty rack mounting holes always bothered me. One solution is to a case for the 707 but they are very expensive and it cuts down on air circulation making your deck run hotter than it should. My solution is to create these beautiful solid Mahogany wood side panels that are secured using the rack mount holes. Please keep in mind that wood varies in appearance. The item you get may vary slightly than the samples depicted in the ad. Dress up your Deck now. RT-707 or RT-701 – these will fit both models! Easy to mount – just slide them on and hand-tighten the screws. Takes all of a minute. What you will receive:Two (2) side rails (cheeks) made from Mahogany Hardwood.Four (4) stainless Steel Hex-Head screws with trim washer.Four (4) washers (for the rear).Four (4) nuts (for the rear). Rails available for other Pioneer components also.Other wood types available too. Click on “See Other Items” under Seller Info at top to check out all my listings. I do custom work also. Want rails without holes? Send me a message. The PIONEER RT-707 pictured IS NOT INCLUDED!
-
Pioneer Reel to Reel RT-707 RT-701 Side Rails Cheek Set
Maybe its my borderline OCD because when I looked at my RT-707 the rack mount notches always drove me crazy (none of my other Pioneer gear has them!). So I made these. They look simple, but that’s deceiving. I wanted the layer lines to be horizontal to match the direction of the silver face ‘grain’. The problem with 3D printing tall thin items is the tend to wobble and fall over. After many (I mean many) attempts I found the way to keep them stable is to put indents on the back so a support will connect and hold them ridged all the way to the top! I think the result looks pretty good. These would also work great to hide rack rash your RT-707 (or 701) might have. I’d love to make a set for the RT-909/901 but don’t have the height. If you have one and would like a free set, just send me the measurement (in mm) and I’ll print one out. Once you confirm the fit, I’ll offer them for sale in a separate listing. My first production run is in black but I’m considering other colors. Please let me know if you have any suggestions. MADE IN THE USA These are design and manufactured in Largo, Florida using 3D printing technology and PLA (Polylactic Acid) material which has outstanding material properties and is derived from renewable resources. COMPATIBILITY These will fit Pioneer RT-707 and RT-701 reel to reel tape decks. WHATS INCLUDED 2 (right and left) Side Rails Cheeks Of course the RT-707 in the photos is not included. Please see my other listings for reel to reel accessories! THANK YOU! I know you have a lot of buying options and appreciate you taking the time to look at this listing.