My Blog

Item Tag: Seller

  • Vintage RadioShack Stereo In-Ear Earbuds With Windup Case 33-1170

    Ships first class! We ship everyday

  • Piezoelectric Ear Piece Crystal Radio High Impedance 3.5mm 1/8in Mini Head Phone

    Piezo Electric Crystal Earphone Sensitive High Impedance Ceramic Ear Piece for Transistor Radio DIY Electronics Projects Specifications: Impedance: 20K ohmResistance: 20M ohmCapacitance: 15,000 pfSensitivity: 57db at 1KHzFrequency Range: 200 – 8,000HzOperation Temperature: -20 to 60 degree CelsiusWire: 42-inch Molded twisted Wire Housing: Molded Plastic ShellConnector: 3.5mm (1/8 inch) Standard Audio Headphone Jack Connector *Please Note: These are the manufacturer specifications and may vary slightly in each production unit. Ceramic earphone/Crystal earpiece for Transistor and Crystal Radios, Sensitive Electronics Projects, Lab research and other DIY experiments requiring a very sensitive high impedance earpiece.Piezoelectric earphones also known as crystal earphones, ceramic earphone, and piezo earpieces are the most sensitive earphones. They are in fact many times more sensitive than even the most sensitive magnetic earphones, dynamic earphones, or electrostatic earphones that you may use on your iPod or iPhone. Sensitive earphones have a very high impedance, which is measured in ohms and should not be used directly with a modern amplified radio. Crystal Earphones are so sensitive and require so little power to operate that you can hear a small ‘click’ just by touching the two bare leads together.Crystal radios will not work with modern earphones or ‘earbuds’ as they are designed to operate with amplified audio sources found in today’s electronic devices. Crystal Earphones are used in the construction of the crystal radio and in some science experiments such as listening to electric fish.

  • 10 White 29mm 8V Fuse Lamp LED Light Bulb Marantz Sansui Pioneer Kenwood

    8v snap-in White LED fuse lamps. These are perfect for replacing any of the 8v, 7v, and 6.3v fuse lamps found in vintage stereo gear like receivers amps etc.. Marantz, Pioneer, Sansui, Kenwood, they all used them. These are 29mm long. LEDs run cooler, last almost forever, and draw much less current than the old incandescent bulbs. 10-Pack of Bulbs Type: LED Voltage: 8v AC/DC (they will work fine at 6.3v, 7v, or 8v) Current Draw: 20mAColor: White Length: 29mmDiameter: 6mmPolarity: Non-polar

  • 10 Warm White 29mm 8V Fuse Lamp LED Light Bulb Marantz Sansui Pioneer Kenwood

    8v snap-in Warm White LED fuse lamps. These are perfect for replacing any of the 8v, 7v, and 6.3v fuse lamps found in vintage stereo gear like receivers amps etc. Marantz, Pioneer, Sansui, Kenwood, they all used them. These are 29mm long. LEDs run cooler, last almost forever, and draw much less current than the old incandescent bulbs. 10-Pack of Bulbs Type: LED Voltage: 8v AC/DC (they will work fine at 6.3v, 7v, or 8v) Current Draw: 20mAColor: Warm White Length: 29mmDiameter: 6mmPolarity: Non-polar

  • 1988 ANTRON 99 OMNIDIRECTIONAL BASE STATION C.B. ANTENNA INSTRUCTION MANUAL +++

    1988 ANTRON 99 OMNIDIRECTIONAL BASE STATION C.B. ANTENNA INSTRUCTION MANUAL +++ HELLO! ***THIS IS A FIXED PRICE ITEM******BUY IT NOW!!!******NO BIDDING REQUIRED – NO WAITING!!***ALL ITEMS ARE SHIPPED PROMPTLY! ****PLEASE READ SHIPPING,PAYMENT & RETURN TERMS BELOW BEFORE PURCHASING****FREE USPS MEDIA MAIL SHIPPING IN THE U.S.OR IF YOU PREFER FASTER SHIPPING,YOU CAN REMIT ADDITIONAL PAYMENT FOR USPS PRIORITY SHIPPING ON THE CHECKOUT PAGEINTERNATIONAL SHIPPING IS AVAILABLE THROUGH USPS PRIORITY FLAT RATE PACKAGING. PLEASE SEE EBAY SHIPPING CALCULATOR FOR RATES PLEASE VISIT MY EBAY STORE FOR MORE GREAT ITEMS. WE CARRY VINTAGE ORIGINAL FACTORY ISSUED SERVICE & REPAIR MANUALS, ORIGINAL DEALERSHIP SALES BROCHURES, VINTAGE COLLECTIBLE BOOKS & MUCH MORE! THANKS! ITEM DESCRIPTIONYOU ARE PURCHASING :A VINTAGE COLLECTIBLE MARCH 1988 FACTORY ISSUED ANTRON ANTENNA RESEARCH & ELECTRONICS “ANTRON 99” OMNIDIRECTIONAL BASE STATION C.B. ANTENNA 27.205 MHz ASSEMBLY, INSTALLATION & INSTRUCTION MANUAL ALSO INCLUDES : 1-INSTALLATION INSTRUCTIONS FOR THE ANTRON GPK-1 GROUND PLANE RADIAL KIT & 1-ANTRON-HOW TO SAFELY INSTALL YOUR CB ANTENNA BOOKLET MPN #  FKJKR0487 4 PAGES VERY GOOD CONDITION FOR IT’S AGE ***SEE ITEM CONDITION DESCRIPTION BELOW*** PICTURES ARE AN INTEGRAL PORTION OF THIS LISTING-PLEASE VIEW THEM CAREFULLY IN ADDITION TO READING ANY TEXTED DESCRIPTION.MY APOLOGIES FOR ANY BLURRY PHOTOS. OLD AGE SUCKS. THIS WOULD BE A GREAT ADDITION TO YOUR COLLECTION OR REFERENCE LIBRARY! CONDITION: PRE-OWNED VERY GOOD CONDITION FOR IT’S AGE. MAY HAVE SMALL CORNER FOLDS, MINOR EDGE CHIPS, LT AGE DISCOLORATION, OR CREASES / FOLDS. MAY ALSO HAVE HOLES PUNCHED FOR BINDER STORAGE OR HAVE BINDER HOLES THAT ARE OBLONG OR TORN. PLEASE VIEW PICTURES TO ASCERTAIN CONDITION. ** PLEASE MAKE 100% SURE THAT THIS ITEM IS THE CORRECT ITEM YOU NEED-VERIFY THE ITEM WITH YOUR LOCAL EXPERT, SUPPLY HOUSE OR VENDOR BEFORE PURCHASING TO MAKE SURE IT MEETS YOUR NEEDS. NO RETURNS ON ELECTRICAL/ELECTRONIC HARDWARE ITEMS. ** PLEASE SIGN UP TO RECEIVE AN EMAIL FROM EBAY WHEN MY NEW ITEMS FOR SALE ARE POSTED TO EBAY. YOU CAN DO THIS BY PICKING ME AS A “FAVORITE SELLER” BY USING THE “SAVE THIS SELLER” FEATURE LOCATED AT THE TOP RIGHT CORNER OF THIS LISTING. ALSO WE WOULD APPRECIATE IT IMMENSELY IF YOU WOULD FORWARD OUR LISTINGS TO YOUR FRIENDS, FAMILY & ASSOCIATES SO THEY MAY TAKE A LOOK AT OUR ITEMS.THANK YOU VERY MUCH FOR DOING THIS! PLEASE ASK ANY QUESTIONS BEFORE PURCHASING. FREE SHIPPING APPLIES TO DOMESTIC U.S. SALES ONLY & IS SHIPPED VIA USPS MEDIA MAIL AND CAN TAKE UP TO 7-10 DAYS TO BE DELIVERED (SELLER HAS NO CONTROL OVER SHIPPING TIME ONCE USPS HAS THE ITEM IN THEIR POSSESSION). MEDIA MAIL TO HAWAII,ALASKA & U.S. TERRITORIES CAN TAKE UP TO 30 DAYS FOR DELIVERY. IF YOU NEED THE ITEM QUICKER,PLEASE CHOOSE THE USPS PRIORITY MAIL OPTION (2-3 DAYS DELIVERY) AT CHECKOUT AT AN ADDITIONAL COST.INTERNATIONAL SHIPPING IS AVAILABLE. DELIVERY TRACKING IS INCLUDED WITH DOMESTIC SHIPPING ONLY-TRACKING NUMBER WILL BE UPLOADED TO THE EBAY SYSTEM.EACH ITEM WE SELL IS INCONSPICUOUSLY MARKED WITH A CUSTOM ULTRAVIOLET STAMP IN A RANDOM LOCATION TO PROTECT BOTH BUYER & SELLER FROM UNAUTHORIZED RETURNS. FEEDBACK POSITIVE FEEDBACK & A FIVE STAR***** RATING IS IMMENSELY APPRECIATED. IN THE UNLIKELY EVENT THAT YOU ENCOUNTER A PROBLEM WITH YOUR PURCHASE, PLEASE EMAIL US IMMEDIATELY TO GIVE US THE OPPORTUNITY TO CORRECT THE SITUATION BEFORE YOU LEAVE FEEDBACK. THANK YOU! WE ACCEPT PAYPAL ONLY THANK YOU FOR YOUR INTEREST IN OUR EBAY ITEMS WE HOPE TO SEE YOU AGAIN! AUTO-MANUALS

  • Infinity RS2, RS2000, RS2001,RS5, RS9 6″/ 6.5″ Foam Surround Speaker Repair Kit

    For sale is a New High Quality U.S. Manufactured Foam Surround Kit made specifically for Infinity 6.5″ midrange / woofers (all with 4.6″ – 4.75″ diameter cones) as used in models: ERS-600, ERS-640, RS2, (DOES NOT FIT RS2A / RS2B) RS2000, RS2001, RS3 (DOES NOT FIT newer RS3 with 10″ woofers or RS3A, RS3b with 10″ woofers ) RS5, RS9, RS9B, SL20, SL30, SL40, SM62, SM65, Kappa 5, Reference One as well as others. This kit will not fit Infinity 8″woofers (6.0″ / 6.1″ cones) or Infinity 10″ woofers. (7.5″ cones) We stock several other surround kits on eBay for Infinity woofers / mid-range drivers. If you can’t find the 8″, 10″, 12″ or 15″ size surround kit you need or you’re not sure of the Infinity woofer you own, please click on “Ask a Question” link at the bottom of the page. This kit includes: TWO (2) new/fresh, premium quality U.S. Made polyether foam surrounds (The best money can buy), detailed “easy to follow” instructions, (Written for the first time speaker repair person – for this specific type of driver/surround installation) alignment c.d and clear drying adhesive. BEWARE OF CHEAP IMITATIONS! We are proud to sell only premium quality, U.S. manufactured foam surrounds. Do not be misled by the availability of inferior chinese foam surrounds that are currently being sold on the market. The surrounds in this kit are designed to fit and work properly like the original. They are correct in thickness, eccentricity and size and they have the correct sized half roll which is needed for long cone excursions so your speakers will retain their original sound. Using a inferior replacement foam surround that doesn’t have these qualities will seriously degrade the sound performance of your speakers and waste your time & money. Do it right the first time… ACCEPT NO SUBSTITUTE! You DO NOT have to cut out/remove your original dust caps to install this kit so there is NO risk of accidentally cutting the cone, cutting the wires going to the voice coil/cone or cutting yourself. (NO shimming required!) Technical support is available if you have questions Many satisfied customers have used this kit to repair their woofers with excellent “like new” results. Keep your original cones and replace your bad foam surrounds with this kit. You will save big $$$ compared to unnecessary expensive re-cones *Purchase with confidence- Please check our feedback profile ————- ————– USA & Territories… Pays within 7 days after the amount of $6.00 for USPS First Class Mail boxed shipping. CANADIAN Customers… THE SHIPPING AMOUNT RECEIVED ON EBAY’S INVOICE IS INCORRECT / HIGH. Estimated shipping/handling is $23.00 S/H for U.S.P.S. 1ST Class Airmail – “un-insured” or $40.00 for U.S.P.S. Priority Mail International – “insured”. If possible, please wait for a second amended ebay invoice that will be sent with the correct shipping amount before making any payment. *If you have to pay the higher shipping amount (required by ebay) in order to complete your purchase, the overcharge will be refunded back to you. All other International Customers… Estimated shipping/handling is $28.00 S/H for U.S.P.S. 1ST Class Airmail – “un-insured” or $51.00 for U.S.P.S. Priority Mail International – “insured. The item(s) you purchase will be mailed in a box for protection. Thanks for Looking! Rick Cobb Speaker Parts, LLC

  • Speaker Surround Repair Kit For Infinity Crescendo Series CS-3007 Woofers + Mids

    Professional quality speaker surround repair kit for your Infinity Crescendo CS-3007 Duel 8″ System. This kit will bring your woofers and mids back to their original condition and sound. We use only the highest quality U.S. made surrounds. The kit comes with all you will need to re-foam four 8″ Infinity drivers and two 5″ mids. Included are four professional quality 8″ speaker surrounds, two 5″ surround, directions, acrylic speaker adhesive, and adhesive spreaders. The instructions take you through the process of re-foaming your driver without removing the dust cap, which is the best way to maintain the functionality, performance and originality of your driver. We are happy to offer international shipping on all of our kits. See shipping section for details. y703

  • INFINITY 3 1/2″ SPEAKER DUST CAPS

    My Audio Addiction Two N.O.S. Infinity 3 1/2″ speaker dust caps. These caps are the foam sealed cloth. Replace your old and worn caps to restore your speaker to like new condition. The caps measure 3 1/2 inches total diameter and have the Infinity logo on the center of the dust cap. These caps are very difficult to find. Get them now while supplies last.

  • Infinity RS10, RS225, RS325, RS425 SM62 6″/6.5″ Foam Surround Speaker Repair Kit

    For sale is a New High Quality U.S. Manufactured Foam Surround Kit made specifically for Infinity 6.5″ woofers (all with 4.6″ – 4.75″ diameter cones) as used in models: CS3008, CS3009, ERS-640, RS10, RS10B, RS225, RS325, RS425, RS52, RS525, RS8A, RS8B, RS JR, SL40, SM62, SM65, SS2002, Sterling 2000, 2000, Reference One, Reference Six as well as others. We stock several other surround kits on eBay for Infinity woofers/midrange drivers. If you can’t find the 8″, 10″, 12″ or 15″ size surround kit you need or you’re not sure of theInfinity woofer you own, please click on “Ask a Question” link at the bottom of the page. This kit includes: TWO (2) new/fresh, premium quality U.S. Made polyether foam surrounds (The best money can buy), detailed “easy to follow” instructions, (Written for the first time speaker repair person – for this specific type of driver/surround installation) alignment c.d and clear drying adhesive. BEWARE OF CHEAP IMITATIONS! We are proud to sell only premium quality, U.S. manufactured foam surrounds. Do not be misled by the availability of inferior chinese foam surrounds that are currently being sold on the market. The surrounds in this kit are designed to fit and work properly like the original. They are correct in thickness, eccentricity and size and they have the correct sized half roll which is needed for long cone excursions so your speakers will retain their original sound. Using a inferior replacement foam surround that doesn’t have these qualities will seriously degrade the sound performance of your speakers and waste your time & money. Do it right the first time… ACCEPT NO SUBSTITUTE! You DO NOT have to cut out/remove your original dust caps to install this kit so there is NO risk of accidentally cutting the cone, cutting the wires going to the voice coil/cone or cutting yourself. (NO shimming required!) Technical support is available if you have questions Many satisfied customers have used this kit to repair their Infinity woofers with excellent “like new” results. Keep your original cones and replace your bad foam surrounds with this kit. You will save big $$$ compared to unnecessary expensive re-cones ————- ————– All item(s) purchased will be mailed in a sturdy box for protection. USA & Territories… Pays within 7 days after the amount of $6.00 for USPS First Class Mail boxed shipping. CANADIAN Customers… THE SHIPPING AMOUNT RECEIVED ON EBAY’S INVOICE IS INCORRECT / HIGH. Estimated shipping/handling is $23.00 S/H for U.S.P.S. 1ST Class Airmail – “un-insured” or $40.00 for U.S.P.S. Priority Mail International – “insured”. If possible, please wait for a second amended ebay invoice that will be sent with the correct shipping amount before making any payment. *If you have to pay the higher shipping amount (required by ebay) in order to complete your purchase, the overcharge will be refunded back to you. All other International Customers… Estimated shipping/handling is $28.00 S/H for U.S.P.S. 1ST Class Airmail – “un-insured” or $51.00 for U.S.P.S. Priority Mail International – “insured. The item(s) you purchase will be mailed in a box for protection. Thanks for Looking! Rick Cobb Speaker Parts, LLC

  • Infinity RS 125, Reference E-L, 5″ Speaker Foam Surround Woofer Repair Kit

    For sale is a New/Fresh HIGH QUALITY foam surround kitfor Infinity RS125 and Reference E-L bookshelf 5″ woofers (all with 3.9″ – 4.0″” diameter cones) If you need a surround kit for your speakers and you’re not sure of which kit you need, please click on “Ask a Question” link at the bottom of the page. This kit includes: Two (2) new/fresh, premium quality U.S. Made polyether foam surrounds (The best money can buy),detailed “easy to follow” instructions, (Written for the first time speaker repair person – for this specific type of driver/surround installation) alignment c.d and clear drying adhesive. BEWARE OF CHEAP IMITATIONS! We are proud to sell only premium quality, U.S. manufactured foam surrounds. Do not be misled by the availability of inferior chinese foam surrounds that are currently being sold on the market. The surrounds in this kit are designed to fit and work properly like the original. They are correct in thickness, eccentricity and size and they have the correct sized half roll which is needed for long cone excursions so your speakers will retain their original sound. Using a inferior replacement foam surround that doesn’t have these qualities will seriously degrade the sound performance of your speakers and waste your time & money. Do it right the first time… ACCEPT NO SUBSTITUTE! You DO NOT have to cut out/remove your original dust caps to install this kit so there is NO risk of accidentally cutting the cone, cutting the wires going to the voice coil/cone or cutting yourself. (NO shimming required!) Technical support is available if you have questions Many satisfied customers have used this kit to repair their woofers with excellent “like new” results. Keep your original cones and replace your bad foam surrounds with this kit. You will save big $$$ compared to unnecessary expensive re-cones *Purchase with confidence- Please check our feedback profile ————- ————–USA & Territories… Pays within 7 days after the amount of $6.00 for USPS First Class Mail boxed shipping.CANADIAN Customers… THE SHIPPING AMOUNT RECEIVED ON EBAY’S INVOICE IS INCORRECT / HIGH. Estimated shipping/handling is $23.00 S/H for U.S.P.S. 1ST Class Airmail – “un-insured” or $40.00 for U.S.P.S. Priority Mail International – “insured”. If possible, please wait for a second amended ebay invoice that will be sent with the correct shipping amount before making any payment. *If you have to pay the higher shipping amount (required by ebay) in order to complete your purchase, the overcharge will be refunded back to you. All other International Customers… Estimated shipping/handling is $28.00 S/H for U.S.P.S. 1ST Class Airmail – “un-insured” or $51.00 for U.S.P.S. Priority Mail International – “insured. The item(s) you purchase will be mailed in a box for protection. Thanks for Looking! Rick Cobb Speaker Parts, LLC