The Pioneer SX-750 Vintage Stereo Receiver is a rare and sought-after piece of vintage audio equipment from the 1970s, manufactured in Japan. This model features a classic design and high-quality sound performance, perfect for collectors and enthusiasts of vintage stereo receivers. With its unique features and retro charm, this receiver is sure to make a great addition to any vintage audio setup.
Item Tag: SX-1050
-
Pioneer SX-1050 Complete Rebuild Kit High-Quality Receiver Recap W/ Transistors
Up for sale here is this rebuild kit for the Pioneer SX-1050. This includes all the parts you need to rebuild a Pioneer SX-1050, and includes the correct size replacement main capacitors. This does not include new lights, fuses, or any resistors. This also does not include the driver or output transistors. Correct replacement outputs are MJ21195G/MJ21196G, available here. Please don’t buy any of the fake Chinese “Sanken” transistors on eBay–those are counterfeit and will blow up. This kit includes replacements for all the electrolytic capacitors in the receiver, including the two main filter capacitors, which are replaced with Chemi-Con 22000 uf 100v caps. The new caps are the same diameter as the old ones so they will fit the old clamps perfectly. The kit also includes replacements for almost all the transistors on all the boards except the tuner board. Transistors frequently age worse than the capacitors, so you have to replace them when you’re doing a rebuild. The kit for the power supply includes replacement diodes and zener diodes, which are important to replace, and the protection board kit includes a new Omron relay. A new Omron LY-2-DC48 relay is included to replace the chassis-mount soft-start relay. It does not have the bottom flanges that the old relay has–you will need to remove the old relay from its plastic case, remove the new relay from its case, and then put the new relay in the old relay’s case. It’s actually surprisingly easy. You will also receive detailed instructions to help everything go more easily. These are all high-quality brand new genuine parts, the same ones I use when I rebuild Pioneer equipment. Capacitors are Nichicon PW, Nichicon KL, Nichicon VY, Panasonic FC, Wima film, and Chemi-Con for the main filters. Transistors are Fairchild/Onsemi. Trimmers (for the amp board) are Bourns. I will include surprisingly well-written instructions, but rebuilding a receiver is fairly complicated, and you should know what you’re doing and have a decent soldering iron, heat-sink compound, and a dim-bulb tester. The new main caps use screws that are slightly thicker than the old ones, so you’ll need to enlarge the terminals on the receiver in order to accommodate this. You can drill out the old ring terminals and center mounting piece with a 5mm drill bit if you want, or just replace the old ring terminals, or cut the ring terminals open to make them into spade terminals. I have rebuilt a lot of SX-950s and 1050s in the past few years–they’re really nice receivers, and aren’t too bad to work on. Please see my pictures for details. US shipping and handling is $15, and international is $60. If you have any questions, please ask. Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new power cords, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, new 630v yellow film capacitors at 30 different values, a large variety of transistors for vintage stereo repair, new Wima film capacitors for stereo repair, new 250v yellow film crossover capacitors, and more. Just use “add to cart” on everything you want and then check out for combined shipping.
-
Pioneer SX-1050 SX-5580 rebuild restoration recap upgrade kit filter capacitor
NOTE we also offer FULL kit with BETTER quality caps & INSTRUCTIONS: SX-1050, SX-5580 Or search for item (eBay item number:155126491108 or 165635744357)The scarcity of good, honest techs who can do good and reasonably priced restoration/rebuild of audio equipment inspired me to create this restoration kit. In today’s day and age, it is difficult to find a knowledgeable technician who can service your audio gear properly. I have seen many poor quality restorations of equipment that cost way too much for their owners. In 99% of the cases, only a few parts were replaced, instead of a full and proper restoration job.A proper restoration must replace all electrolytic capacitors on all boards. Do not fall for partial kits that restore just one PCB (power supply, power amp, etc.). This is not a good or proper way to restore your audio equipment. It is the same as with car tires; one should never replace just one tire and keep the other worn-out tires on. A proper rebuild requires a full recap of all PCBs.On the other hand, if one succeeds in finding a good tech, the wait time is usually 6-12 months for the unit to be serviced, and costs are sky-high. I have been servicing audio equipment for many years and have developed deep respect for all good equipment. Knowing how amazing and warm these units can sound, I decided to put together this kit. It includes very good upgrades and improvements that must be done to the unit. This restoration kit will make a huge difference in the sound quality. All the parts are of high-quality Japanese Nichicon / Rubycon / IC / United Chemi capacitors.I am extremely particular about the quality of the parts provided in this kit. Knowing how many bogus/fake caps, diodes, resistors, etc. are out there, I source all the parts from reputable wholesalers and buy them in bulk. Vintage audio equipment has the potential to deliver rich and authentic sound when it is properly restored. Not only can it enhance your listening experience, but it can also evoke memories and bring joy to your life. Let’s work together to bring your vintage gear back to its full potential, and make sure you have the music you deserve. ♩♬♫♪♫♩♬ “They Shall Have Music”- Avery FisherIncluded in this kit: 1. Power/Filter stage capacitors (Nichicon / Panasonic / United Chemi) electrolytic capacitors.2. Complete audio path upgrade with high quality US made (IC) or Panasonic audio grade film capacitors.3. Parts for compete recap of all the electrolytic capacitors. 4. Complete recap of all PCBs. 5. Transistors (PNP, NPN). 6. fuse/s 7. Diodes Please note this kit does not come with any instructions. If you need instructions, see the link below for a full kit. FULL kit with BETTER quality caps & INSTRUCTIONS ———–> LINK We also offer a great selection of Restoration Kits, LED conversion kits, Volume Controls, Rotary Switches and other rare/unique parts;Make sure to check our store ———> LINK (Use the search bar inside the shop to find what you need faster)We may also be interested in purchasing your equipment
-
Pioneer SX 1050 Receiver Wood Case Cabinet – 10 year warranty
Give your Pioneer SX-1050 the cabinet it deserves with this custom-made walnut wood case, crafted from durable MDF and wrapped in real walnut veneer. 🎯 Whether on a shelf, in a cabinet, or front and center — this walnut case gives your Pioneer presence.
-
Pioneer SX-1050 Preamp Boards Rebuild Kit AWG-040 & AWG-041 Recap & Repair Kit
Up for sale here is this preamplifier boards rebuild set for a Pioneer SX-1050. This is all the parts you need to rebuild the four preamp boards in the Pioneer SX-1050–the AWM-089 filter amp board, AWG-040 flat amp board, the AWG-041 tone amp board, and the AWS-094 switch assembly board (only one cap on that board). Over time the preamp boards start developing issues with transistors and capacitors. The old parts are weak and failing. We will make them new again! This kit includes all 47 capacitors and all 12 transistors. It does NOT include replacements for the 2SK30 FETs, which don’t need to be replaced unless they’re malfunctioning. These are all high-quality brand new genuine parts. The capacitors are Nichicon PW, Nichicon KL, and Wima film caps at the correct uf and the same or higher voltage ratings, and the transistors are new Fairchild/Onsemi and are the correct subs for the original transistors/diodes. These are not cheap Made in China parts, they are extremely high-quality and they are what I use when I rebuild Pioneer gear. Frankly, “recapping” is a waste of time if you’re not going to replace the transistors as well. A lot of times the transistors age worse than the caps, so you should definitely change out the transistors while you’re in there. If you have a crackle on one or both channels that goes away when you pull out the rear preamp jumpers, it’s probably a bad preamp transistor. I will include a surprisingly well-written instruction sheet, but this is a pretty complicated repair, so if you don’t have much experience with this, buy the kit and take it to a professional. You should definitely have a fair amount of soldering experience and have a decent soldering iron and a dim-bulb tester with 100W bulb, as well as the usual tools. Please see my pictures for details. US shipping and handling is $5, and international is $18, no matter what quantity you buy. All my small parts are set up for combined shipping, so just use the “add to cart” feature and then check out all at once, and it will combine shipping. If you have any questions, please ask. Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, and more. Just use “add to cart” on everything you want and then check out for combined shipping.
-
Pioneer SX-1050 Wood Case –Charcoal Grey Oak Finish-10 Year Warranty
Color / Finish: Charcoal Grey Oak. Model: Wood Case for Pioneer SX-1050. Veneer Grain: Oak. Precision-built to fit the Pioneer SX-1050 exactly. Slide the Pioneer SX-1050 into the case from the front or rear.
-
Pioneer SX-1050 RECEIVER replacement LED lamps kit front panel bulb lights
I have been servicing Pioneer units for a while. With years I’ve developed deep respect toward Pioneer gear . It is a pity to see how many units are suffering from always failing incandescent bulbs! How much money is wasted for services to replace those incandescent bulbs over and over again! After many years of back and forth I decided to develop a perfect/exact LED replacement that has the same color temperature for the meters, indicators, lettering/paneling. Due to this I decided to develop these proper voltage bulbs. I got in touch with a manufacturer of LED bulbs and worked with them to develop this LED bulbs. I am glad to announce that I succeeded. I am very happy with the result and am sure you will be too! Included: 4 x dial wedge type LED bulbs with CERAMIC body 6 x 3mm wired pig-tail LED bulbs for indicators and meters 1 x 3mm pig-tail LED for the pointer 1 x bayonet lamp 1 x bi-pin lmp Installation Instructions (either Video or PDF file) All are LED, literally infinite bulbs. Color- Warm White (by default) We also have Green, RED, NEON BLUE, COOL WHITE, WARM WHITE color bulbs .
-
Pioneer SX-1050 Power Supply & Protection Recap Kit Capacitor Upgrade Rebuild
This is all the parts you need to rebuild all four of those Pioneer SX-1050 boards. Often the old parts are weak and failing. We will make them new again! Looking for more parts?. Protection board kit.