Sold as is. everything you see in the pictures is what is included in this lot. we of course will get them out as fast as we can. we will help resolve whatever issue you are having. we try very hard to provide good communication and always strive for everyone to have a positive experiences!
Item Tag: Unbranded
-
2 SETS! Black Walnut Rails Pioneer RG-2 RG-60 RG-70 RG-9 SR-303 SR-60 SR-70 SR-9
TWO (2) SETS!!! At a discount price! Black Walnut Side Rails for your Pioneer Signal Processor Made to exacting standards by hand in the USA using only the highest quality solid Black Walnut. Give your Classic Pioneer Signal Processor a facelift! These Solid Black Walnut Side Rails give you Pioneer a splash of class that it deserves. Nothing looks better than Walnut and Silver. The rails are held in place with super-strong 3M double-sided tape. Of course the 3M tape is included – and pre-installed for your convenience. Easy as pie to install. Peel the red tab protective cover from the 3M tape (tab shown in close-up picture).Slide the rail over your faceplate – positioning it evenly with the top of the faceplate.Press firmly so the tape attaches to your unit (it sticks to the side of the case – NOT the silver face).Enjoy the new look! As easy to remove too: Just pull the rails and the tape will release. Which Pioneer Components will these Side Rails fit? This rails in this listing fit the following Pioneer Components:Pioneer RG-2 Dynamic Processor (shown in the pictures)Pioneer RG-60 Dynamic ProcessorPioneer RG-70 Dynamic ProcessorPioneer RG-9 Dynamic ProcessorPioneer SR-303 Reverberation Amplifier (shown in the pictures)Pioneer SR-60 Reverberation AmplifierPioneer SR-70 Reverberation AmplifierPioneer SR-9 Reverberation AmplifierPlease keep in mind that wood varies in appearance. The item you get may vary slightly than the samples depicted in the ad. What you will receive:Four (4) side rails (cheeks) made from Black Walnut Hardwood.3M double-sided tape on both rails (already attached). Rails available for other Pioneer components also.Other wood types available too. Click on “See Other Items” under Seller Info at top to check out all my listings. Check my feedback and bid with confidence. The PIONEER Components shown in the Listing Pictures ARE NOT INCLUDED!
-
Black Walnut Rails Fits Pioneer RG-2 RG-60 RG-70 RG-9 SR-303 SR-60 SR-70 SR-9
Black Walnut Side Rails for your Pioneer Signal Processor Made to exacting standards by hand in the USA using only the highest quality solid Black Walnut. Give your Classic Pioneer Signal Processor a facelift! These Solid Black Walnut Side Rails give you Pioneer a splash of class that it deserves. Nothing looks better than Walnut and Silver. The rails are held in place with super-strong 3M double-sided tape. Of course the 3M tape is included – and pre-installed for your convenience. Easy as pie to install. Peel the red tab protective cover from the 3M tape (tab shown in close-up picture).Slide the rail over your faceplate – positioning it evenly with the top of the faceplate.Press firmly so the tape attaches to your unit (it sticks to the side of the case – NOT the silver face).Enjoy the new look! As easy to remove too: Just pull the rails and the tape will release. Which Pioneer Components will these Side Rails fit? This rails in this listing fit the following Pioneer Components:Pioneer RG-2 Dynamic Processor (shown in the pictures)Pioneer RG-60 Dynamic ProcessorPioneer RG-70 Dynamic ProcessorPioneer RG-9 Dynamic ProcessorPioneer SR-303 Reverberation Amplifier (shown in the pictures)Pioneer SR-60 Reverberation AmplifierPioneer SR-70 Reverberation AmplifierPioneer SR-9 Reverberation AmplifierPlease keep in mind that wood varies in appearance. The item you get may vary slightly than the samples depicted in the ad. What you will receive:Two (2) side rails (cheeks) made from Black Walnut Hardwood.3M double-sided tape on both rails (already attached). If you need more than 1 set, see my other eBay listing for a TWO sets! If you need more than 2 sets, message me through the eBay system and I will get you what you need. Rails available for other Pioneer components also.Other wood types available too. Click on “See Other Items” under Seller Info at top to check out all my listings. Check my feedback and bid with confidence. The PIONEER Components shown in the Listing Pictures ARE NOT INCLUDED!
-
3 SETS! Black Walnut Rails Pioneer RG-2 RG-60 RG-70 RG-9 SR-303 SR-60 SR-70 SR-9
THREE (3) SETS!!! At a discount price! Black Walnut Side Rails for your Pioneer Signal Processor Made to exacting standards by hand in the USA using only the highest quality solid Black Walnut. Give your Classic Pioneer Signal Processor a facelift! These Solid Black Walnut Side Rails give you Pioneer a splash of class that it deserves. Nothing looks better than Walnut and Silver. The rails are held in place with super-strong 3M double-sided tape. Of course the 3M tape is included – and pre-installed for your convenience. Easy as pie to install. Peel the red tab protective cover from the 3M tape (tab shown in close-up picture).Slide the rail over your faceplate – positioning it evenly with the top of the faceplate.Press firmly so the tape attaches to your unit (it sticks to the side of the case – NOT the silver face).Enjoy the new look! As easy to remove too: Just pull the rails and the tape will release. Which Pioneer Components will these Side Rails fit? This rails in this listing fit the following Pioneer Components:Pioneer RG-2 Dynamic Processor (shown in the pictures)Pioneer RG-60 Dynamic ProcessorPioneer RG-70 Dynamic ProcessorPioneer RG-9 Dynamic ProcessorPioneer SR-303 Reverberation Amplifier (shown in the pictures)Pioneer SR-60 Reverberation AmplifierPioneer SR-70 Reverberation AmplifierPioneer SR-9 Reverberation AmplifierPlease keep in mind that wood varies in appearance. The item you get may vary slightly than the samples depicted in the ad. What you will receive:Six (6) side rails (cheeks) made from Black Walnut Hardwood.3M double-sided tape on both rails (already attached). Rails available for other Pioneer components also.Other wood types available too. Click on “See Other Items” under Seller Info at top to check out all my listings. Check my feedback and bid with confidence. The PIONEER Components shown in the Listing Pictures ARE NOT INCLUDED!
-
TASCAM 414 & 414 MKII THREE BELT SET
This is a three (3) belt set for the Tascam 414 and the 414 MK II It is comprised of the three (3) rubber belts. A hard to find belt set This is a great set that of which we have sold quite a few. Please Note: Due to difficulties with seriously delayed postal deliveries outside the US and with Foreign Buyers not understanding the decreased mail services due to covid that as a result we have now discontinued ALL shipments outside the US effective May 27, 2022. We cannot afford losses or decreased Seller status due to outside factors over which we have absolutely no control If the situation improves in the future we may reconsider that position
-
TASCAM PORTA STUDIO 05 MINISTUDIO FOUR BELT SET WITH IDLER TIRES
This is a complete set of four (4) belts and two (2) idler tires for the TEAC PortaStudio 05 MINISTUDIO cassette unit. Includes the capstan belt, the control belt, counter belt, play belt, and both idler tires. This is a hard to find belt set Please Note: Due to difficulties with seriously delayed postal deliveries outside the US and with Foreign Buyers not understanding the decreased mail services due to covid as a result we have now discontinued ALL shipments outside the US effective May 27, 2022. We cannot afford losses or decreased Seller status due to outside factors over which we have absolutely no control If the situation improves in the future we may reconsider that position
-
Teac C-3RX, C-3X, C-3, Tascam 122, 122b Idler Tire *Pair*
Teac C-3RX, C-3X, C-3, Tascam 122, 122b Idler Tire *Pair* *You are purchasing the two new replacement idler tires in the first photo only. **Free shipping applies only to US mainland, please inquire for other locations. ***Please note that these are shipped standard post to keep costs low so no tracking is available. These fit Teac C-3RX, C-3X, C-3, Tascam 122, and 122b, and possibly others, please see specs. below. Specs: OD: 7/8″ (actual .880) ID: 11/16″ (actual .674)Width: 3/32″ (actual .103) Thank you for looking. Replace your split and hardened tires Idler assembly is for photo only and is NOT included. _gsrx_vers_841 (GS 7.0.16 (841))
-
TASCAM DA-40 THREE BELT SET
This is a three (3) belt set for the Tascam DA-40 digital cassette unit A very hard to find set! It is comprised of the three (3) rubber belts. The set does not include the cog belt Please Note: Due to difficulties with seriously delayed postal deliveries outside the US and with Foreign Buyers not understanding the decreased mail services due to covid that as a result we have now discontinued ALL shipments outside the US effective May 27, 2022. We cannot afford losses or decreased Seller status due to outside factors over which we have absolutely no control If the situation improves in the future we may reconsider that position