Estate find, very early CX-822. Has not been tested. Selling as is for parts or repair only with no refunds or returns. Please see photos to view condition.
Item Category: Vintage Electronics
-
Crown 800 Series Reel To Reel, Low A Upgrade, Model CX824-P4 CH
• Model: CX824-P4 CH. Crown International 800 Series. Classic Crown professional open-reel recorder housed in its original walnut cabinet. Low Z Upgrade. sold exactly as shown. Visible age/use consistent with age.
-
Teac X-700 X-700R reel deck restoration service kit repair rebuild capacitor
The scarcity of good, honest techs who can do good and reasonably priced restoration/rebuild of audio equipment inspired me to create this restoration kit. In today’s day and age, it is difficult to find a knowledgeable technician who can service your audio gear properly. I have seen many poor quality restorations of equipment that cost way too much for their owners. In 99% of the cases, only a few parts were replaced, instead of a full and proper restoration job.A proper restoration must replace all electrolytic capacitors on all boards. Do not fall for partial kits that restore just one PCB (power supply, power amp, etc.). This is not a good or proper way to restore your audio equipment. It is the same as with car tires; one should never replace just one tire and keep the other worn-out tires on. A proper rebuild requires a full recap of all PCBs.On the other hand, if one succeeds in finding a good tech, the wait time is usually 6-12 months for the unit to be serviced, and costs are sky-high. I have been servicing audio equipment for many years and have developed deep respect for all good equipment. Knowing how amazing and warm these units can sound, I decided to put together this kit. It includes very good upgrades and improvements that must be done to the unit. This restoration kit will make a huge difference in the sound quality. All the parts are of high-quality Japanese Nichicon / Rubycon / IC / United Chemi capacitors.I am extremely particular about the quality of the parts provided in this kit. Knowing how many bogus/fake caps, diodes, resistors, etc. are out there, I source all the parts from reputable wholesalers and buy them in bulk. Vintage audio equipment has the potential to deliver rich and authentic sound when it is properly restored. Not only can it enhance your listening experience, but it can also evoke memories and bring joy to your life. Let’s work together to bring your vintage gear back to its full potential, and make sure you have the music you deserve. ♩♬♫♪♫♩♬ “They Shall Have Music”- Avery FisherIncluded in this kit: 1. Power/Filter stage capacitors (Nichicon / Panasonic / United Chemi) electrolytic capacitors. 2. Detailed instruction with colorful images, schematics, manuals (all of these are in electronic form, I consider these much better than printed version due to zoom availability). 3. Schematics 4. Complete audio path upgrade with high quality US made (IC) or Panasonic audio grade film capacitors. 5. Parts for compete recap of all the electrolytic capacitors. 6. Complete recap of all PCBs. 7. Transistors (PNP, NPN). 8. fuse/s 9. Instructions on how to clean the chassis. 10. Instructions on how to clean a faceplate 11. Instructions on how to polish knob covers. 12. Support/help to a reasonable extend in case you need it. (This is what makes us different from other sellers.) We also offer a great selection of restoration kits, LED conversion kits, volume controls,switches and other rare and unique parts; Make sure to check it here ———–> LINK (Use the search bar inside the shop to find what you need faster)We may also be interested in purchasing your equipment
-
TEAC X-300 X-300R X-700 X-700R replacement LED meter lamps lights bulbs kit set
Fits:TEAC X-3 X-3R X-300 X-300R X-7 X-7R X-700 X-700R X-10 X-10R. We also have Green, RED, NEON BLUE, COOL WHITE, Violent, WARM WHITE color bulbs.
-
TEAC X-300 FF, REWIND, PLAY, SPEED KNOB EXCELLENT
. PLEASE READ ALL OF THIS BEFORE YOU BID . YOU ARE BIDDING ON A TEAC X-300 FF, REWIND, PLAY, SPEED KNOB EXCELLENT . . IT CAME FROM A WORKING NICE SOUNDING TEAC X-300 UNIT. PLEASE CHECK OUT MY OTHER TEAC X-300 PARTS. ALSO, PLEASE CHECK OUT MY VINTAGE 7″ REEL TO REEL TAPES FROM DIFFERENT GENRES. EMAIL ME IF YOU HAVE ANY QUESTIONS BEFORE BIDDING.
-
TEAC X-300R Reel to Reel Recorder FRONT PLASTIC PANEL ASSEMBLY.
Used TEAC X-300R Reel to Reel Recorder FRONT PLASTIC PANEL ASSEMBLY in very good condition. Has some small scratches and wears, two small dents (see pics), but looks nice. If you have any questions – please, let me know.
-
Teac X-300 X-300R reel deck restoration service kit repair rebuild capacitor
The scarcity of good, honest techs who can do good and reasonably priced restoration/rebuild of audio equipment inspired me to create this restoration kit. In today’s day and age, it is difficult to find a knowledgeable technician who can service your audio gear properly. I have seen many poor quality restorations of equipment that cost way too much for their owners. In 99% of the cases, only a few parts were replaced, instead of a full and proper restoration job.A proper restoration must replace all electrolytic capacitors on all boards. Do not fall for partial kits that restore just one PCB (power supply, power amp, etc.). This is not a good or proper way to restore your audio equipment. It is the same as with car tires; one should never replace just one tire and keep the other worn-out tires on. A proper rebuild requires a full recap of all PCBs.On the other hand, if one succeeds in finding a good tech, the wait time is usually 6-12 months for the unit to be serviced, and costs are sky-high. I have been servicing audio equipment for many years and have developed deep respect for all good equipment. Knowing how amazing and warm these units can sound, I decided to put together this kit. It includes very good upgrades and improvements that must be done to the unit. This restoration kit will make a huge difference in the sound quality. All the parts are of high-quality Japanese Nichicon / Rubycon / IC / United Chemi capacitors.I am extremely particular about the quality of the parts provided in this kit. Knowing how many bogus/fake caps, diodes, resistors, etc. are out there, I source all the parts from reputable wholesalers and buy them in bulk. Vintage audio equipment has the potential to deliver rich and authentic sound when it is properly restored. Not only can it enhance your listening experience, but it can also evoke memories and bring joy to your life. Let’s work together to bring your vintage gear back to its full potential, and make sure you have the music you deserve. ♩♬♫♪♫♩♬ “They Shall Have Music”- Avery FisherIncluded in this kit: 1. Power/Filter stage capacitors (Nichicon / Panasonic / United Chemi) electrolytic capacitors. 2. Detailed instruction with colorful images, schematics, manuals (all of these are in electronic form, I consider these much better than printed version due to zoom availability). 3. Schematics 4. Complete audio path upgrade with high quality US made (IC) or Panasonic audio grade film capacitors. 5. Parts for compete recap of all the electrolytic capacitors. 6. Complete recap of all PCBs. 7. Transistors (PNP, NPN). 8. fuse/s 9. Instructions on how to clean the chassis. 10. Instructions on how to clean a faceplate 11. Instructions on how to polish knob covers. 12. Support/help to a reasonable extend in case you need it. (This is what makes us different from other sellers.) We also offer a great selection of restoration kits, LED conversion kits, volume controls,switches and other rare and unique parts; Make sure to check it here ———–> LINK (Use the search bar inside the shop to find what you need faster)We may also be interested in purchasing your equipment