Item Category: Vintage Electronics

Up for sale here is this set of 4 warm white LED wedge-lamps. These will replace the four tuning dial lights in the Pioneer SX-850, SX-950, SX-1050, SX-1250, SX-1280, and SX-1980. These are top-quality bulbs, and are the exact same ones I use when I rebuild Pioneer gear. These are top-of-the-line lights–I love using them! The warm white LED wedge lamps will give a nice clear white glow–they’re a little brighter than the original incandescent bulbs. The LEDs will last forever and will run much cooler than the original incandescent bulbs, so they won’t damage the vinyl case covering the way incandescents can. The last picture is of a Pioneer with these warm white wedge LEDs installed. This listing is only for the bulbs, not the receiver. I have many other colors of LED wedge lamps available, so if you want different-color wedge lamps, just let me know and I can swap them in. These are easy to install–all you need is a Philips screwdriver and a gentle touch. I have light kits for most other Pioneer gear listed, just take a look at my other listings. Please see my pictures for details. US shipping and handling is $5, and international is $18, no matter what quantity you buy. All my small parts are set up for combined shipping, so just use the “add to cart” feature and then check out all at once, and it will combine shipping. If you have any questions, please ask. Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new power cords, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, new 630v yellow film capacitors at 13 different values, a large variety of transistors for vintage stereo repair, and more. Just use “add to cart” on everything you want and then check out for combined shipping.

Up for sale here is this complete LED replacement lighting set for the Pioneer SX-1050. You will receive: Four (4) warm white LED wedge lamps (for the tuning dial light diffuser) Nine (9) wired 4mm warm white LEDs (for the speaker lights, source lights, & FM stereo light) These are top-quality bulbs, and are the exact same ones I use when I rebuild Pioneer gear. These are top-of-the-line lights–I love using them! The warm white LED wedge lamps will give a nice clear white glow–they’re a little brighter than the original incandescent bulbs. The LEDs will last forever and will run much cooler than the original incandescent bulbs, so they won’t damage the vinyl case covering the way incandescents can. If you want this kit with all incandescent lamps instead, I have that kit available here. I have many other colors of LED wedge lamps available, so if you want different-color wedge lamps, just let me know and I can swap them in. You will need a soldering iron, wire cutters, needlenose pliers, and a Philips screwdriver. Be very careful not to damage the tuning dial cord when you’re soldering! If you wrap the dial cord in aluminum foil ahead of time, that will help protect it. I have kits for most other Pioneer gear listed, just take a look at my other listings. Please see my pictures for details. US shipping and handling is $5, and international is $18, no matter what quantity you buy. All my small parts are set up for combined shipping, so just use the “add to cart” feature and then check out all at once, and it will combine shipping. If you have any questions, please ask. Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new power cords, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, new 630v yellow film capacitors at 13 different values, a large variety of transistors for vintage stereo repair, and more. Just use “add to cart” on everything you want and then check out for combined shipping.

Up for sale here is this complete incandescent replacement lighting set for the Pioneer SX-1050. You will receive: Four (4) warm white incandescent wedge lamps (for the tuning dial light diffuser) Nine (9) wired 4mm 8v 50ma incandescent bulbs (for the speaker lights, source lights, & FM stereo light) These are top-quality bulbs, and are the exact same ones I use when I rebuild Pioneer gear. These are top-of-the-line lights–I love using them! The incandescent bulbs will match the original warm white glow of the dial–LEDs tend to be a bit brighter and sharper white. If you want this kit with all LED lamps instead, I have that kit available here. You will need a soldering iron, wire cutters, needlenose pliers, and a Philips screwdriver. Be very careful not to damage the tuning dial cord when you’re soldering! If you wrap the dial cord in aluminum foil ahead of time, that will help protect it. I have kits for most other Pioneer gear listed, just take a look at my other listings. Please see my pictures for details. US shipping and handling is $5, and international is $18, no matter what quantity you buy. All my small parts are set up for combined shipping, so just use the “add to cart” feature and then check out all at once, and it will combine shipping. If you have any questions, please ask. Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new power cords, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, new 630v yellow film capacitors at 13 different values, a large variety of transistors for vintage stereo repair, and more. Just use “add to cart” on everything you want and then check out for combined shipping.