My Blog

Item Tag: 30 Days

  • PIONEER RT-707 RT-701 ULTRA THIN COUNTER BELT NEW FREE SHIPPING

    ULTRA THIN COUNTER BELT FOR PIONEER MODELSRT-707, RT-701NEW FRESH STOCK USA FREE SHIPPING WITH TRACKINGPICKUP IS NOT AVAILABLE

  • Pioneer SX-750 Complete Rebuild Kit High-Quality Receiver Recap Caps Transistors

    Up for sale here is this rebuild kit for the Pioneer SX-750. This includes all the parts you need to rebuild a Pioneer SX-750, and includes upgraded replacement main capacitors. This does not include new lights, fuses, or any resistors. This also does not include the driver or output transistors. Correct replacement outputs are MJ21195G/MJ21196G, available here. Please don’t buy any of the Chinese transistors on eBay–those are counterfeit and may blow up. This kit includes the following:Power Supply board: 9 diodes 1 capacitor (Nichicon PW) Protection/Power Supply Board: 17 capacitors (Nichicon PW, Panasonic FC, Wima film)12 transistors (Fairchild/Onsemi)1 heat-sink1 Relay (Omron) Amplifier Board: 6 transistors (Fairchild/Onsemi, includes two matched pairs of KSA992 to replace the 2SA798s)8 capacitors (Nichicon PW, Panasonic FC, Wima film)2 trimmers (Bourns) Tone board: 8 capacitors (Nichicon PW, Nichicon KL, Wima film) Muting board: 5 capacitors (Nichicon PW, Panasonic FC, Wima film) Tuner/Phono EQ board: 29 capacitors (Nichicon PW, Panasonic FC, Wima film)8 transistors (Fairchild/Onsemi, some boards will not need these) Main capacitors: Kemet 15000 uf 63v, same diameter as the old ones2.2uf 250v Panasonic film bypass capacitors Instructions These are all high-quality brand new genuine parts. These are extremely high-quality parts, and they are what I use when I rebuild Pioneer equipment. I will include a surprisingly well-written instruction sheet, but rebuilding a receiver is fairly complicated, and you should know what you’re doing and have a decent soldering iron, heat-sink compound, and a dim-bulb tester. This kit may not fix your Pioneer SX-750, but it’s fairly likely that it will, and it will definitely help it run better. Please note that working on an SX-750 is a bit tricky–some of the boards are tucked in there and can be difficult to access. Please see my pictures for details. US shipping and handling is $12, and international is $28. If you have any questions, please ask. I have other kits and lots of vintage electronics listed–feel free to take a look!

  • Philips Bluetooth Stereo System with CD Player, MP3,USB, AU in, FM Radio

    Richer sound for all your tunesThis classic-looking micro system lets you stream music and podcasts, play CDs, and listen to FM radio–all in rich 60 W sound. It’s perfect for a lounge or open-plan living space, and you can connect other sources via USB or audio-in.All your musicThis stylish micro system lets you stream playlists and more via Bluetooth, play CDs and listen to FM radio. The digital radio tuner with 10 presets delivers clear reception, and the CD player can read MP3 CDs and recorded CDs.Bass-reflex loudspeakers. Richer low tonesThese bookshelf-style loudspeakers give you clear sound and good bass thanks to the combination of woofer, tweeter, and bass-reflex ports. A 60 W maximum output brings big sound to any room. Perfect for a lounge or open-plan living space.Classic designThe two-tone central unit and speaker cabinets recall the design of hi-fi separates. The textured volume-control dial adds a satisfying analog feel to operation. There are buttons on the front of the unit for playback and source selection.Digital Sound Control. Choose a preset sound styleHip-hop or choral, symphony or rock opera? Whatever you love, this micro system’s Digital Sound Control function lets you enjoy it more. Pick from preset sound styles designed to bring out the best in your music.At home in your homeThis AC-powered micro system looks great in any room. Bluetooth wireless range is 10 m, and you can charge a smart device via the USB port. An easy-to-use remote puts key functions at your fingertips.

  • Pioneer RT-909 restoration rebuild service kit repair capacitor reel RTR

    The scarcity of good, honest techs who can do good and reasonably priced restoration/rebuild of audio equipment inspired me to create this restoration kit. In today’s day and age, it is difficult to find a knowledgeable technician who can service your audio gear properly. I have seen many poor quality restorations of equipment that cost way too much for their owners. In 99% of the cases, only a few parts were replaced, instead of a full and proper restoration job.A proper restoration must replace all electrolytic capacitors on all boards. Do not fall for partial kits that restore just one PCB (power supply, power amp, etc.). This is not a good or proper way to restore your audio equipment. It is the same as with car tires; one should never replace just one tire and keep the other worn-out tires on. A proper rebuild requires a full recap of all PCBs.On the other hand, if one succeeds in finding a good tech, the wait time is usually 6-12 months for the unit to be serviced, and costs are sky-high. I have been servicing audio equipment for many years and have developed deep respect for all good equipment. Knowing how amazing and warm these units can sound, I decided to put together this kit. It includes very good upgrades and improvements that must be done to the unit. This restoration kit will make a huge difference in the sound quality. All the parts are of high-quality Japanese Nichicon / Rubycon / IC / United Chemi capacitors.I am extremely particular about the quality of the parts provided in this kit. Knowing how many bogus/fake caps, diodes, resistors, etc. are out there, I source all the parts from reputable wholesalers and buy them in bulk. Vintage audio equipment has the potential to deliver rich and authentic sound when it is properly restored. Not only can it enhance your listening experience, but it can also evoke memories and bring joy to your life. Let’s work together to bring your vintage gear back to its full potential, and make sure you have the music you deserve. ♩♬♫♪♫♩♬ “They Shall Have Music”- Avery FisherIncluded in this kit: 1. Power/Filter stage capacitors (Nichicon / Nippon / United Chemi) electrolytic capacitors. 2. Detailed instruction with colorful images, schematics, manuals (all of these are in electronic form, I consider these much better than printed version due to zoom availability). 3. Schematics 4. Complete audio path upgrade with high quality US made (IC) or Nippon audio grade film capacitors. 5. Parts for compete recap of all the electrolytic capacitors. 6. Complete recap of all PCBs. 7. Transistors (PNP, NPN). 8. fuse/s 9. Instructions on how to clean the chassis. 10. Instructions on how to clean a faceplate 11. Instructions on how to polish knob covers. 12. Support/help to a reasonable extend in case you need it. (This is what makes us different from other sellers.) We also offer a great selection of Restoration Kits, LED conversion kits, Volume Controls, Rotary Switches and other rare/unique parts;Make sure to check our store ———> LINK (Use the search bar inside the shop to find what you need faster)We may also be interested in purchasing your equipment

  • New Replacement Kit for 40 + 40 + 20 + 20 uf 450v Quad Can Capacitor

    Up for sale here is this kit to allow you to replace a 40 uf/40 uf/20 uf/20 uf 450v quad (4-section) can capacitor. You will receive two (2) new 40 uf 450v Supertech radial capacitors, two (2) 22 uf 450v Supertech radial capacitors, and one (1) 5-lug terminal strip. You can mount the terminal strip under the chassis, attach the capacitors to it, and then attach the various wires and resistors from your equipment, giving you the equivalent of the original can capacitor, without worrying about gutting it or searching around for new old stock cans. This isn’t that hard to install, but you should know what you’re doing and have a decent soldering iron. Please see my pictures for details. If you’d like a custom can capacitor replacement kit instead, I have a listing here where you can custom-design whatever you’re looking for. US shipping and handling is $5, and international is $18, no matter what quantity you buy. All my small parts are set up for combined shipping, so just use the “add to cart” feature and then check out all at once, and it will combine shipping. If you have any questions, please ask. Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new power cords, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, new 630v yellow film capacitors at 38 different values, new 1200v yellow film capacitors at 15 values, a large variety of transistors for vintage stereo repair, new Wima film capacitors for stereo repair, new 250v yellow film crossover capacitors, and more. Just use “add to cart” on everything you want and then check out for combined shipping.

  • CAPSTAN BELT FOR TEAC REEL TO REEL X-20R X-700R X-1000R X-2000 X-2000R FREE SHIP

    CAPSTAN DRIVE BELT FOR TEAC MODELSX-20R, X-700R, X-1000R, X-2000, X-2000RFOR THE “R” SERIES ONLY – NOT FOR THE “M” SERIES FOR X-1000M AND X-2000M SEARCH 202777195423THIS IS THE CAPSTAN BELT ONLYNEW FRESH STOCK USA FREE SHIPPING WITH TRACKINGPICKUP IS NOT AVAILABLE———————————– TRR-1