Item Tag: BCA-CV-RC-1056

Recone kit as pictured for the Cerwin Vega 15″ 158EM woofer which I believe was used in the V-34 cabinets and others. The cone throat will need to be slightly enlarged for the 3″ voice coil. @0 plus years on ebay selling mostly Cerwin Vega parts and kits with 100% positive feedback. Will be packed securely and shipped promptly. Thanks!

Replacement cone for the Cerwin Vega ATW-15. Ribbed cone and red over gray foam. If you have any questions, or want a specific bunch of parts put together for you, let me know. I’m here to help and happy to put together any combination of parts you need. 22+ years on Ebay, selling mostly speaker related stuff, and mostly Cerwin Vega, with 100% positive feedback. Will be packed securely and shipped promptly. Thanks!

Recone kit for the Cerwin Vega LE15-D subwoofer. These were developed specifically, exactly, for this woofer. Ribbed cone like the original and pleated accordion surrounds. Several years, and more recones than I can count went into developing these to provide kits that not only take the pounding that I know you’re going to give them, but also match the t/s parameters of the originals. These kits are different from the other kits available in several ways. All the other kits I have seen, use the 5H2040 cones. Those cones were originally developed for the eh series woofers, which were very different. They used a smaller spider which sat down inside the typically used landing, so those 5h2040 cones at 3.825 deep, are too deep to sit properly when using the correct spider. Also, since those EH series woofers were used as a midbass in sound reinforcement tops, those cones are extremely thin and light. About 26 grams, which is half of the original LE cone weight. Plus the surround ribbing has much shallower ribs, limiting excursion. These new Brew City kits solve all those issues. A close look at the surround, and comparing these to the originals, and the other kits out there, will tell the story. Plus these are much stiffer, and weigh in at 52g. The only drawback to these, is that the ribbing doesn’t go down the cone quite as far, which could not be avoided. Most spec sheets specify the 4.5″ dustcap which is included, but if you wanted the 3.75″ dustcap, just let me know. These kits include the DUAL VOICE COIL coils specified for these. Kits include everything in the picture. Shims available on request. Also included is a sheet of tips and suggestions from decades of experience, along with my personal phone number should you have an issue. If you have any questions, or want a specific bunch of parts put together for you, let me know. I’m here to help and happy to put together any combination of parts you need. 20+ years on Ebay, selling mostly speaker related stuff, and mostly Cerwin Vega, with 100% positive feedback. Will be packed securely and shipped promptly. Thanks!

Recone kit for the Cerwin Vega ATW-15. These were developed specifically, exactly, for this woofer. Lightweight ribbed cone like the original. Red over gray foam like original. All new high precision voice coils, on ALUMINUM formers like the originals, and DLP wound like the originals. (DLP is dual lead parallel) Several years, and more recones than I can count went into developing these to provide kits that not only take the pounding that I know you’re going to give them, but also match the t/s parameters of the originals. Kits include everything in the picture. Shims available on request. Second picture shows a woofer reconed with this kit. (woofer not included) Also included is a sheet of tips and suggestions from decades of experience, along with my personal phone number should you have an issue. If you have any questions, or want a specific bunch of parts put together for you, let me know. I’m here to help and happy to put together any combination of parts you need. 19 years on Ebay, selling mostly speaker related stuff, and mostly Cerwin Vega, with 100% positive feedback. Will be packed securely and shipped promptly. Thanks!

Recone kit for the Cerwin Vega 15W5 used in the E715 and LS-15. Red over gray foam like original. Precision voice coils, on ALUMINUM formers like the originals, and wound like the originals. Both the E715 and LS-15 came with several different woofers, so you will need to pull one out, and verify the model of the woofers you have in your speakers. If you have a woofer model# starting with “wofh”, these kits will NOT fit. Now, if you do have the 15W5 woofer, hold on to your hat, because “the book” on these woofers has been wrong, for decades. Every other kitmaker has listed the recone kit for these woofers, as 8 ohms. Well, every 15W5 myself and others have torn down and checked (and it’s been MANY) they are actually FOUR ohm woofers. And on close inspection of the coils, we’ve worked out which ones they used. And that specific 4 ohm voice coil, is included in this kit. Now it’s possible that these woofers also came in 8 ohms, but I haven’t found one yet. The best thing to do, is measure the ohms of your woofer. (note: the ohm rating of the whole speaker is irrelevant, 8 ohm speakers can have 4 ohm woofers, and vice versa) So you have to take the woofer out, disconnect it, and measure it. If it’s around 3.3 or 3.4 dcr on a handheld meter, it’s a 4 ohm woofer. If it’s more like 7 ohms, it’s an 8 ohm woofer. If you do have an 8 ohm woofer, let me know and I’ll make you an 8 ohm kit. But I’ll bet you a box of donuts, it’s going to be 4 ohms. Making these the only correct kits for your woofers, anywhere. This listing includes the stock type tan/yellow spiders. I also have black spiders available (see my AT15 kits) The black ones are stiffer. The stock stiffness for these woofers is “c”. but the stock spiders are a pretty light “c”, almost a “b”. The yellow ones I supply are a hair stiffer than many replacements, and don’t distort after a pounding. However my black ones are a heavy C, a little stiffer yet. So if you are going to pound the bejesus out of these with a 80 pound 1000 watt Crown amplifier, I’d suggest the black spiders. But if you’re using just a regular HT receiver or something with 100 or 200 watts per channel, then I’d say go with the tan/yellow ones. If you do want the black ones, just message me when you buy and let me know, and I’ll pack those in the kit for you. Several years, and more recones than I can count went into developing kits that not only take the pounding that I know you’re going to give them, but also match the t/s parameters of the originals as closely as possible. Kits include everything in the picture. Shims available on request. Also included is a sheet of tips and suggestions from decades of experience, along with my personal phone number should you have an issue. If you have any questions, or want a specific bunch of parts put together for you, let me know. I’m here to help and happy to put together any combination of parts you need. 20+ years on Ebay, selling mostly speaker related stuff, and mostly Cerwin Vega, with 100% positive feedback. Will be packed securely and shipped promptly. Thanks!

Recone kit for the Cerwin Vega re38 rew15 Woofer. Red over gray foam like original. High precision voice coils, on ALUMINUM formers like the originals. These kits include the correct wound voice coil which are DLP (dual lead parallel) for these woofers. Kits include everything in the picture. Shims available on request. Also included is a sheet of tips and suggestions from decades of experience, along with my personal phone number should you have an issue. If you have any questions, or want a specific bunch of parts put together for you, let me know. I’m here to help and happy to put together any combination of parts you need. 22+ years on Ebay, selling mostly speaker related stuff, and mostly Cerwin Vega, with 100% positive feedback. Will be packed securely and shipped promptly. Thanks!

Recone kit for the Cerwin Vega VSW15 VS-150. Red over gray foam like original. All new high precision voice coils, on ALUMINUM formers like the originals, and DLP wound like the originals. (DLP is dual lead parallel) Kits include everything in the picture. Shims available on request. Also included is a sheet of tips and suggestions from decades of experience, along with my personal phone number should you have an issue. If you have any questions, or want a specific bunch of parts put together for you, let me know. I’m here to help and happy to put together any combination of parts you need. 22+ years on Ebay, selling mostly speaker related stuff, and mostly Cerwin Vega, with 100% positive feedback. Will be packed securely and shipped promptly. Thanks!

Recone kit for the Cerwin Vega W15-p woofer used in the PD9 and probably others. These were developed specifically, exactly, for this woofer. Ribbed cone like the original and pleated accordion surrounds. Precision voice coils, on ALUMINUM formers like the originals. Several years, and more recones than I can count went into developing these to provide kits that not only take the pounding that I know you’re going to give them, but also match the t/s parameters of the originals. These kits are different from the other kits available in several ways. All the other kits I have seen, use the 5H2040 cones. Those cones were originally developed for the eh series woofers, which were very different. They used a smaller spider which sat down inside the typically used landing, so those 5h2040 cones at 3.825 deep, are too deep to sit properly when using the correct spider. Also, since those EH series woofers were used as a midbass in sound reinforcement tops, those cones are extremely thin and light. About 26 grams, which is half of the original W15-P cone weight. Plus the surround ribbing has much shallower ribs, limiting excursion. These new Brew City kits solve all those issues. A close look at the surround, and comparing these to the originals, and the other kits out there, will tell the story. Plus these are much stiffer, and weigh in at 52g. The only drawback to these, is that the ribbing doesn’t go down the cone quite as far, which could not be avoided. Most spec sheets specify a 3.75″ dustcap which is included, however I have seen some of these woofers that appeared original with a 4.5″ dustcap, so if you want the wider cap instead, just let me know and I’ll pack those for you. Kits include everything in the picture. Shims available on request. Also included is a sheet of tips and suggestions from decades of experience, along with my personal phone number should you have an issue. If you have any questions, or want a specific bunch of parts put together for you, let me know. I’m here to help and happy to put together any combination of parts you need. 19 years on Ebay, selling mostly speaker related stuff, and mostly Cerwin Vega, with 100% positive feedback. Will be packed securely and shipped promptly. Thanks!