Item Tag: BCA-CV-RC-1056

Recone kit for the Cerwin Vega re38 rew15 Woofer. Red over gray foam like original. High precision voice coils, on ALUMINUM formers like the originals. Kits include everything in the picture. Shims available on request. One note: The common coil listing and what was until recently thought to be correct specs for the voice coil for this woofer is is incorrect for the most part, possibly entirely. After tearing down dozens of these woofers and looking closely to what coils were actually originally in them, I have found that they are different from what most people list as the correct coil. The commonly listed coil has a unique and slightly longer winding width. But the coils I’ve removed from countless originals, are not that coil. So this kit includes the coil that I have found to be actually correct. It is possible, that some RE38 woofers did come with that longer wind coil. So, of you want the longer winding coil that everyone else has for this woofer, I do have them, and I’m happy to substitute those coils at no extra charge. You can also tear down your woofer before ordering, and measure the winding depth to see what coils yours originally had. Cerwin (and Heppner) made a lot of part substitutions and swaps over the years, and established parts listings are now known to be incorrect in many instances. Also included is a sheet of tips and suggestions from decades of experience, along with my personal phone number should you have an issue. If you have any questions, or want a specific bunch of parts put together for you, let me know. I’m here to help and happy to put together any combination of parts you need. 22+ years on Ebay, selling mostly speaker related stuff, and mostly Cerwin Vega, with 100% positive feedback. Will be packed securely and shipped promptly. Thanks!

Replacement cone for the Cerwin Vega ATW-12. Ribbed cone and red over gray foam. If you have any questions, or want a specific bunch of parts put together for you, let me know. I’m here to help and happy to put together any combination of parts you need. 22+ years on Ebay, selling mostly speaker related stuff, and mostly Cerwin Vega, with 100% positive feedback. Will be packed securely and shipped promptly. Thanks!

Recone kit for the Cerwin Vega W15-4 woofer used in the 380SE, CD90 and probably others. These were developed specifically, exactly, for this woofer. Ribbed cone like the original and pleated accordion surrounds. Precision voice coils, on ALUMINUM formers like the originals. Several years, and more recones than I can count went into developing these to provide kits that not only take the pounding that I know you’re going to give them, but also match the t/s parameters of the originals. These kits are different from the other kits available in several ways. All the other kits I have seen, use the 5H2040 cones. Those cones were originally developed for the eh series woofers, which were very different. They used a smaller spider which sat down inside the typically used landing, so those 5h2040 cones at 3.825 deep, are too deep to sit properly when using the correct spider. Also, since those EH series woofers were used as a midbass in sound reinforcement tops, those cones are extremely thin and light. About 26 grams, which is half of the original W15-P cone weight. Plus the surround ribbing has much shallower ribs, limiting excursion. These new Brew City kits solve all those issues. A close look at the surround, and comparing these to the originals, and the other kits out there, will tell the story. Plus these are much stiffer, and weigh in at 52g. The only drawback to these, is that the ribbing doesn’t go down the cone quite as far, which could not be avoided. Most spec sheets specify a 3.75″ dustcap which is included, however I have seen many of these woofers original with a 4.5″ dustcap, so if you want the wider cap instead, just let me know and I’ll pack those for you. COIL OPTION: I have the specs for the coils originally spec’d for these woofers, which are a somewhat common 2-layer coil, also used in the D9. BUT, upon tearing down several W15-4 woofers, I have found that the coil gap is wider than called for, and big enough to accept the thicker wound DLP coils used in a few other woofers like the DX9 woofer. All things being equal, I think that DLP coil would be the preferred one to use. Since Cerwin (And Heppner) were notorious for making running design changes, I don’t know if all W15-4 motors had the wider gap. So, these kits will include the standard coil specified for W15-4 woofer, but if you want to send me a picture of the coil gap, so we can verify which one you have, I’d be happy to substitute the thicker DLP coil in your kits if you want them. Kits include everything in the picture. Shims available on request. Also included is a sheet of tips and suggestions from decades of experience, along with my personal phone number should you have an issue. If you have any questions, or want a specific bunch of parts put together for you, let me know. I’m here to help and happy to put together any combination of parts you need. 20+ years on Ebay, selling mostly speaker related stuff, and mostly Cerwin Vega, with 100% positive feedback. Will be packed securely and shipped promptly. Thanks!

Recone kit for the Cerwin Vega D9 152WR Woofer. Red over gray foam like original. High precision voice coils, on ALUMINUM formers like the originals. These kits include the correct wound voice coil which are DLP (dual lead parallel) for these woofers. Kits include everything in the picture. Shims available on request. Also included is a sheet of tips and suggestions from decades of experience, along with my personal phone number should you have an issue. If you have any questions, or want a specific bunch of parts put together for you, let me know. I’m here to help and happy to put together any combination of parts you need. 22+ years on Ebay, selling mostly speaker related stuff, and mostly Cerwin Vega, with 100% positive feedback. Will be packed securely and shipped promptly. Thanks!