HAFLER DH-120 5.1K 3 WATT REPLACEMENT RESISTORS FOR R10 . THESE REPLACE THE 2 WATT HIGH FAILURE RATE RESISTORS IN YOUR HAFLER DH-120 AMPLIFIERAS. ALWAYS, THANKS FOR LOOKING.
Item Tag: Hafler
-
GOLD PLATED RCA JACK SET FITS HAFLER PHASE LINEAR AND MANY MORE
HIGH QUALITY GOLD PLATED RCA JACK SET FITS HAFLER / DYNACO OTHERS .100% copper high purity gold plated RCA jack for superior connections. Maximum panel thickness is .250 inch. Insulated shoulder washer fits 3/8 inch knockout. Uninsulated, they will fit a 5/16 to 3/8 hole. Shoulder washers color coded red and black. Extra backing nut included. I use these when upgrading the Hafler, Dynaco, and Phase Linear equipment. This is the best grade RCA connector I sell. As always, thanks for looking.
-
(2) NOS HAFLER Thermal Sensor, Elmwood 2450: SWH-119/SF025 (DH500, P500, XL600)
They are utilized in the fan circuit to adjust the speed; closing at roughly 55°C. They were made by Elmwood Sensors and are Model 2450, 87-265 F131. Works with 7 pin miniature, 9 pin miniature, Magnoval, Novar, and Compactron tubes.
-
Hafler DH-500 (FIVE HUNDRED) Stereo Power Amplifier Works!!
The Hafler DH-500 Stereo Power Amplifier is a vintage audio device known for its quality and durability. Made in the United States, this amplifier weighs 45 lbs and is designed to deliver powerful stereo sound. The Hafler brand is highly respected in the vintage audio community, and the DH-500 model is known for its reliability and performance. Perfect for audiophiles looking to enhance their vintage audio setup, this amplifier is a valuable find for those who appreciate classic audio equipment. Some cosmetic damnage caused by use as can be seen in pictures.
-
HAFLER MODEL 100 STEREO PREAMPLIFIER – SERVICED – CLEANED – TESTED – WITH BOX
HAFLER MODEL 100 STEREO PREAMPLIFIER – SERVICED – CLEANED – TESTED. WITH ORIGINAL BOX. THIS VINTAGE STEREO PREAMPLIFIER WORK GREAT AND IS IN EXCELLENT CONDITION INSIDE AND OUT. WE REPLACED ALL DEFECTIVE CAPACITORS AND ANY OTHER DEFECTIVE COMPONENTS. CLEANED ALL CONTROLS AND SWITCHES. REPAIRED ALL POOR SOLDER CONNECTIONS. (WE HAVE BEEN IN BUSINESS FOR OVER 60 YEARS REPAIRING VINTAGE AUDIO EQUIPMENT.) IF YOU HAVE ANY CONCERNS, PLEASE CONTACT US PRIOR TO YOUR PURCHASE.
-
Hafler Five Hundred (dh500) power amp both channels Work
The Hafler DH500 is a vintage power amplifier made in the United States by the renowned brand Hafler. This amplifier offers both channels working at full capacity, providing high-quality sound and performance for vintage audio systems. With its durable construction and reliable operation, the Hafler DH500 is a valuable addition to any vintage audio setup for music enthusiasts seeking a classic amplifier experience.
-
HAFLER DH-200 PC-6 INPUT TRANSISTOR MATCHED SET
HAFLER DH200 PC-6 MATCHED INPUT TRANSISTOR REPAIR KIT. THIS KIT SOLVES 95 PERCENT OF ISSUES RELATING TO DC OFFSET OR POPCORN NOISE AND HISS. TRANSISTORS Q1, Q2, Q5, AND Q6 ARE SCREENED AND MARKED WITH RED TOPS. ENOUGH TO RENEW ONE CHANNELOF THE PC-6 DRIVER BOARD. (6 SEMICONDUCTORS TOTAL) KIT COMES WITH PC-6 PICTORIAL SHOWING DEVICE LOCATION AND ORIENTATION. SEE ALL MY DYNACO AND HAFLER KITS BY VISITING MY E-BAY STORE!! DON’T FORGET TO ADJUST BIAS AND CHECK OFFSET AFTER REPLACEMENT.
-
HAFLER DH-500 DH-200 DH-220 DH-120 XL-280 POWER SWITCH PLUS!
HAFLER DH-500 DH-200 DH-220 DH-120 P-225 LIGHTED POWER ROCKER SWITCH. THIS IS A NEW OEM DIRECT SERVICE CENTER REPLACEMENT PART. THE ORIGINAL HAFLER SWITCH HAD A UL RATING OF 10 AMPS @ 125VAC. THIS NEW VERSION SWITCH HAS A UL RATING OF 16 AMPS @ 125VAC. COMES WITH 3 1/4 FEMALE QUICK CONNECTS AND 1KV MIN DISC CAPACITOR FOR A FRESH START. TERMINAL MARKINGS (1-2-3) NEXT TO LUGS ON BACK FOR EASY IDENTIFICATION.THE 1/4 FEMALE QUICK CONNECTS ALLOW YOU TO KEEP THE HEAT AWAY FROM THE POWER SWITCH INTERNAL COMPONENTS. THIS IS THE MAJOR CAUSE OF PREMATURE SWITCH FAILURE. AS ALWAYS, THANKS FOR LOOKING. #SL111 FITS A 1.125 X .550 KNOCK OUT HOLE
-
NOS HAFLER “Hafler Amplifier” Front Panel Self-Adhesive Logo Strip: ($13.95/ea)
You are bidding on (1) NOS Hafler “Hafler Amplifier” front panel self-adhesive logo strip; P/N FA-LOGOMA1/4. These are original, quality logo strips, purchased directly from Hafler. These can be used on all models of Hafler amplifiers and are also very cool for DIY amplifier projects. Self-adhesive backing, and protective front plastic film which can be peeled off once installed. Logo strip is black in color with “Hafler Amplifier” in white; overall size is 10 7/16″ long X 1 5/16″ wide. Vintage Electron Inc. possesses the largest inventory of NOS Dynaco parts available anywhere in the world, having purchased both the remaining warehouse inventory of the old Sound Values/Stereo Cost Cutters Inc. (SV/SCC) operation as well as the remaining inventory of the old Dynaco National Service Center. SV/SCC was the company that purchased nearly 250,000 pounds of Dynaco parts when Dynaco closed it’s doors back in 1979; they also purchased the existing Hafler inventory from the Rockford Fosgate Corporation back in the early 1990‘s. Quantities of some parts (both Dynaco and Hafler) are very limited as can be expected. Vintage Electron Inc. has no affiliation with the old SV/SCC company and we do not provide repair services at this time for any of the Sound Valves brand products. Please visit our store and search under the Hafler section for additional Hafler items, search under the Dynaco section for Dynaco items, and search under the Sound Valves section for Sound Valves items. Thanks for looking at our listing and be sure to check out our other listings and auctions for other items of interest. SPECIAL OFFER – FREE brand new VE Tube Pin Straightener (Made In USA) for all orders over $250!!! Works with 7 pin miniature, 9 pin miniature, Magnoval, Novar, and Compactron tubes. Also available for individual sale, please visit our store and search for Tube Pin Straightener.