Item Tag: Marantz

Welcome to The Speaker Port! Up for a sale is a set of replacement speaker terminal plates for the Marantz 2325 vintage stereo receiver. This will allow you to replace the original spring speaker terminals with more modern banana plug terminals for both the A and B outputs. The terminals used are skinnier than normal uniformly spaced terminals due to the limited space of the speaker terminal plate opening. It does allow for the use of individually terminated male banana plug tips for your speaker wires. It also allows for bare wire attachment (14g max). This conversion kit improves the look and wiring options for your 2325. Once installed, it really looks spectacular and completely stock. The panel is constructed using 3D Printing technology. It is rigid and is able to withstand the abuse that the terminals can experience. You can re-purpose your original mounting hardware and can either solder the internal speaker wires directly to the back of the terminals (recommended) or use ring tip terminals (recommended). NOTE: Installation of this part does require certain skills and competency using tools and a soldering iron. If you are not comfortable doing this work yourself, take it to a electronics shop and they should be able to do the work for you. We have developed this item on an actual 2325 and guarantee that it will work. The Marantz 2325 is a vintage piece of equipment and as a result, you accept full responsibility/liability for the work required to install these parts in your system. Installation Instructions You will need some basic tools/materials, such as a Philips screw driver, wire cutters/strippers, soldering iron/solder. Remove the top cover of the receiver. Loosen the back panel of the unit so that you can get more room to work behind the speaker terminals and make removing/installing the old/new terminals easier. Remove the screws/nuts holding on the existing speaker terminals. Put these aside as you will re-use them to install the new plate. Pull back the original terminals and install the new terminal plates. Once it is installed, snip off one wire at a time from the original terminals and solder them to the back screw posts of the new one. Keep the orientation exactly as it was with the originals. Note: you can chose to put ring terminals on the ends of the internal wiring and attach them to the plate using the extra nut provided. For best connectivity, we recommend soldering the wires in. Once everything is in place, re-assemble the unit and you are good to go! WARNING: DO NOT overheat the back end terminals. Nothing more than a normal 40W soldering iron should be used and even so, make sure you are proficient in the right procedure for soldering wires onto terminals such as these. If the screw terminals gets too hot, it could melt the plate of the outside terminal spacers and/or warp the screw down wire nuts. General Terms and Conditions Unless otherwise specified above, the following terms and conditions apply. If you have a question about one of our items that is not answered above or below, please reach out to us. Your bid means that you have read, understood and agree to all the items listed below. Any used/repaired/restored item we sell is tested and verified to be in working condition before we list it. Any NEW items we sell that are sealed in OEM packaging are assumed to be in perfect working condition as it left the manufacturer. The condition and function of the item(s) in this listing will be accurately represented in each listing based on its known state when it leaves our hands. There is no warranty of any kind provided or implied. Any item we chose to sell internationally will be shipped using the eBay Global Shipping Program. To minimize cost to our Customers, we do not ship items with insurance beyond what the carrier provides by default…if any. If an item is damaged in shipping, we are not responsible for refunding the item or returning it. We do not cheat our Customers by charging ridiculously inflated shipping like many other sellers. We calculate shipping costs based on the actual weight and dimensions of the box it will come in and any additional handling costs associated with boxes, packing materials and eBay fees. The only forms of payment we accept are those specified in the list. Once an item has been paid for, we typically ship within one business day. However, due to things like holidays, weather, or other acts of God outside of our control, we set a handling time to be higher than this so that we do not get penalized by eBay for shipping late.) If there will ever be a delay in shipping, you will be promptly notified. All items normally ship via USPS or FedEx, however, we reserve the right to use whatever carrier is appropriate. All sales are final. Unless otherwise noted in the listing, there are no returns accepted for any reason. If you have a question about the listing, we welcome you to send us a message about it, but please do so before bidding/buying and item. We have a 100% positive feedback rating. We have this because we do business in an honorable and respectable manner. We are committed to Customer satisfaction. If you have ANY issue with something we have sold, please contact us directly first in order to resolve the matter.