Please be sure your measurements of the plug you need match the measurements on the 2nd photo.This cord will not fit if you have a figure 8 style opening or any other shape other than a rectangle.Replacement AC Power Cord for Vtg Roberts Reel to Reel Player 2-Pin Round Prongs.
Item Tag: Money Back
-
6ft Polarized 2-Pin Power Cord with Ears for Vintage Solid State TV Stereo Radio
*Visit my eBay Store* Visit my eBay Store -* nwtradepost *- for many more Great Deals! FOR SALE: Replacement Cord: Brown Vintage Polarized Power Cord with “Ears” and 5/16″ Center to Center Spaced Contacts for many Vintage Solid State TVs and Stereo Radio, but not them all! Be sure to check measurements prior to purchase! – This cord will not fit if you have a figure 8 style opening or any other shape other then a rectangle. Includes “Ears”. Thank you!• Polarized Plug with Ears.• 5/16″ Center to Center Spaced Contacts• 18/2 AWG Cable• 7A * 125V Max Rating• 6ft Long Brown CableIMPORTANT: Be sure your device has 2-pins that are 5/16″ spaced apart at the centers – See detailed measurements below.IMPORTANT: Be sure that the “Plug End” with fit into the “Plug Opening” on your appliance – See detailed measurements below.Click out our store for other plugs in a similar size. See the non-polarized version of this same plug here. –> https://www.ebay.com/itm/226479502894 Detailed Measurements: -1) 2-Hole Plug Plug End: 5/8″ Width -2) 2-Hole Plug Plug End: 1/4″ Height -3) Hole Spacing: Measured from Center To Center: 5/16″CONDITION: Photos are of the actual item that will be shipped. We don’t do bait and switch! – Brand New. FREE TRACKING CONFIRMATION ON ALL ORDERS! MORE PHOTOS AVAILABLE UPON REQUEST! – Just ask!•Welcome: It is the goal of Northwest Trade Post to provide all buyers with a positive, 5-star experience and exceed your expectations. I do my very best to over describe all items to avoid any confusion with the item you are purchasing. If you have any questions please never hesitate to ask!. I operate a smoke free facility, however some pre-owned items may come from smoking environments. It needs to be understood that used items should be cleaned before use. •Returns: When accepted, please return all materials included with item and return the item in the exact same condition. Please read entire description and ask any questions prior to purchase to avoid loss of any shipping/return shipping costs. Please be sure of your purchase, please note that “Free Shipping” means that the seller pays for the original shipping cost, so any time an item is returned, the seller does not receive a refund for that original postage cost. Items returned opened, used or missing original packaging or packing material are subject to a restocking fee. We reserve the right to refuse service to buyers who are known to abuse the return system, example: Failing to read complete description details and buying the wrong sized item by mistake then opening a claim for “item not working or defective” or “item not as described or photographed”. Buyer is responsible for return postage. Northwest Trade Post will always take responsibility for any mistakes made on our part. •Shipping: Please be sure your address is accurate prior to sending payment, it can not be changed after payment is received and I can not ship to any other address. Most orders will be shipped immediately or the same business day but no later then the next business day, except in rare occasions. Shipping costs are for the United States of America only. Please remember that “Free Shipping”, when offered, is not free, the postage is paid by the seller with the expectation that the buyer is purchasing the correct item needed and plans to keep the item and not return it, the seller does not receive a refund on used postage, even when offered as “Free Shipping”. International shipping is handled by the eBay Global Shipping program and all additional shipping charges/import fee’s go directly to a third party postal carrier, not to the seller. The seller uses a portion of the item sale cost to ship the item to the Global Shipping Center. •Payment: Please be sure of your purchase prior to paying, sellers are charged a non-refundable payment processing fee as soon as payment is received, a portion of this fee is not refundable to the seller. I accept payment from verified PayPal users and ship to the verified address only. Buyer is expected to pay within 2 days. Please contact me if for any reason you expect a delay in your payment. If no payment is received after 3 days a case will be opened and closed by eBay automatically after another few days. eBay Charges a Final Value fee as soon as a buyer commits to buying an item, the only way to recoup those fees is to allow this process to finish. •Feedback: Once you leave positive feedback, our systems will automatically give you positive feedback in return. If for any reason you are not satisfied with your purchase, please contact me via “General Question” before opening a case, leaving negative, neutral or positive feedback with 3 or less stars in any category. Selecting any other reason for contact could cause eBay to automatically put penalties on a sellers account for one full year, no matter the outcome. Please Take A Look At My Other Listings! THANK YOU FOR YOUR BUSINESS!
-
Pioneer SX-1250 SX-1050 SX-950 SX-1010 Base Mount for Bar Antenna Holder W72-092
Manufactured here in Minnesota with Delrin Acetal High Quality Product. Comes as one unit consisting of 7 parts. If you are doing a restoration of one of these units.. SX-1250 1050 950 828 1010 and QX-949 9900 and TX-9500 9100 8100 1000 or TX-800 or others! This may finish off your restoration project insuring that this part looks and preforms as it should. Although your prized unit may have this part and it may appear to be ok. We encourage you to look at it closely with a light and a magnifying glass. You may see stress cracks and the steel swivel pivot arm could have rust and decay. The steel swivel pivot arm is manufactured to specs using high quality Stainless Steel. The Adjustment Cap that is on the rear has been manufactured with more material and the slot is deeper so that you can adjust the tension on the Antenna Bar without damaging the cap. The spring is an exact duplicate of the original and the tension is the same or exceeds the original part. The inside plastic pieces made of Delrin hold the spring in place and prevent it from doing damage to the other inside parts. Installation is simple. Take out the 4 screws on the old part your replacing then put the new part on using your existing screws. On the top of the old swivel shaft there is a small screw, remove it slide your existing Antenna Bar & Holder on to the shaft of the new swivel and attach the new screw provided…and adjust to the position desired. Again, this is a new remanufactured part that is guaranteed to meet or exceed the specifications of the part you are replacing. Please review the photos carefully and contact us with any questions before purchase. Parts could fit other different Application’s and Receivers. Do your homework. We do not guarantee it will fit your particular receiver. (((Part itself is Guaranteed!))) Contact for return must be with in 30 days of purchase. Only eBay Global Shipping Program is used for all orders shipped outside the United States. Buyer pays for shipping back to United States, regardless of reason for return. Guarantee is void if damaged or tampered with. Part will be marked to prevent part swapping. Sale is only for the part listed only. Feedback is reciprocated after receiving usually with in 30 days. Photos may not always be of the exact part being sold due to many items pictured being sold at one time.
-
1920’s Emerald Green Radio loop antenna wire, DeForest and more. 20AWG 90ft
90 feet of Emerald Green colored, cloth covered, loop antenna wire. The wire is 20 AWG (19/32) served with polyester yarn to closely approximate the original. The served wire has an OD of 1/16″ or, 0.060″ or, 1.5mm. The DeForest loop takes similar length. The Radiola 25 and 28 loops take approximately 75-90 feet to rewind. To our knowledge, no loop was manufactured with Litz wire. I last made this wire over 10 years ago and halted production after moving. I offer the wire in gold, “tarnished copper”, emerald green, and brown. Additionally, Other colors available upon request. Proudly made in Lititz, PA. Thanks for looking
-
FM Dipole Antenna, NEW, twin lead, for SANSUI Receivers and FM tuners
FM Dipole Antenna Perfect for your vintage SANSUI gear! Enhances FM stereo receptionAttaches to back of receiver/tuner, mounts on wall or lies on floor5-ft center lead with 6-ft spanSpade lugs for easy connectionIndividually poly-bagged Feedback: We are committed to the satisfaction of our customers and strive to provide the highest level of service and excellence. We love positive feedback and will leave it automatically for everyone that leaves it for us. Please email us with any concerns or issues prior to leaving negative or neutral feedback, as we can only correct issues when we are made aware of them! Positive feedback is left upon receipt of same. You are going to love this! If you have any questions, please ask them before you bid. Inquiries are always welcome! If you’re hesitating, don’t! Normally ships within 24-48 hours of receipt of cleared payment.All buyers receive a delivery confirmation number.Expedited shipping via USPS Priority Mail also available at checkout for US buyers! Get your stuff really quick!!Sorry, no APO/FPO addresses. No shipping anywhere outside of the USA. Good luck and have fun! All text, art, HTML, and photographs © D3 Design Group 2013-2017. All Rights Reserved. manbytsdog™
-
FM Dipole Antenna, NEW, twin lead, for PIONEER receivers and FM tuners
FM Dipole Antenna Perfect for your vintage PIONEER gear! Enhances FM stereo receptionAttaches to back of receiver/tuner, mounts on wall or lies on floor5-ft center lead with 6-ft spanSpade lugs for easy connectionIndividually poly-bagged Feedback: We are committed to the satisfaction of our customers and strive to provide the highest level of service and excellence. We love positive feedback and will leave it automatically for everyone that leaves it for us. Please email us with any concerns or issues prior to leaving negative or neutral feedback, as we can only correct issues when we are made aware of them! Positive feedback is left upon receipt of same.Payments: by PayPal only.You are going to love this! If you have any questions, please ask them before you bid. Inquiries are always welcome!If you’re hesitating, don’t! Normally ships within 24-48 hours of receipt of cleared payment.All buyers receive a delivery confirmation number.Expedited shipping via USPS Priority Mail also available at checkout for US buyers! Get your stuff really quick!!Sorry, no APO/FPO addresses. No shipping anywhere outside of the USA. Good luck and have fun! Lots more goodies right here! All text, art, HTML, and photographs © D3 Design Group 2017. All Rights Reserved. manbytsdog™
-
Retro BLUE Spaceman Headphones Scan Radio Vintage N.I.B. Bendable With Antenna
f Vintage Blue Spaceman Scan Radio From The 1990s With Speaker 12.00 NEW OLD STOCK – NEW IN BOXMeasures 5 inches tall and 3 inches wideOver 11 inches tall with antenna fully extended Uses 2 AAA batteriesSpaceman is wearing headphones marked SCAN and RESETAnalog volume control dial – radio is very loudCompletely bendable and posable (like Gumby)
-
AM SW Radio Antenna Stranded Copper Line Hook Up Wire – For Antique Tube Radios
Click here to add us to your favorites and Click here to view our other auctions including restored antique radios, Zenith black dial wall clocks, grill cloth, decals and many antique radio supplies.This powerful AM & short wave antenna not only works great but looks great too! The 12ft, 22 gauge stranded copper wire sure packs a punch for its size! It is even wound on a hardwood spool, finished in American Walnut, to match your antique radio. The wire is locked into the spool to allow for easy wind out and wind up. A hot soldered alligator clip attaches quick and easy to any wire or screw terminal antenna lead. Click here to see a video of the antenna attached & unattached to a playing AM tube radio: https://youtu.be/DkV3LW0eVuc Wire Specifications:Gauge 22 AWG Conductor Strand 7/30 Conductor Material Copper, Annealed Tinned Jacket (Insulation) Material Poly-Vinyl Chloride (PVC) Jacket (Insulation) Diameter 0.062″ (1.57mm) Jacket (Insulation) Thickness 0.016″ (0.41mm) Length 12′ Voltage 300V Operating Temperature -20°C ~ 105°C Jacket Color Black Ratings UL Style 1007/1569, ASTM B-33 Spool Size: 1-15/16″ long x 1-3/8″ thick
-
Pioneer RT-707 Recap & Rebuild Kit High-Quality Reel-to-Reel Full Capacitor Set
Up for sale here is this complete recap kit for a Pioneer RT-707 reel-to-reel tape deck. This includes replacements for all the electrolytic capacitors in the RT-707, including the special axial and high-voltage caps. There are seven individual bags of parts, with the kits for each board separated to make installation easier. These are all high-quality brand new genuine parts. The capacitors are 105° Panasonic FC, Nichicon PW, Nichicon KL, Wima film, Panasonic film, and two Illinois capacitors at the same uf ratings and the same or higher voltage ratings. These are extremely high-quality parts, and they are what I use when I rebuild vintage gear. Obviously the RT-707 needs a lot of mechanical work for a restoration, and lots of new rubber parts, and this kit does not include any of that, just the capacitors. Replacing the capacitors is fairly easy, and I will include a basic instruction sheet that explains how capacitors are replaced, but it is not a step-by-step guide, just a general one. The RT-707 is a pretty complicated piece of equipment, so if you have not worked on vintage gear before, this is probably not what you want to start on. You should know what you’re doing and have a decent soldering iron and a dim-bulb tester with a 60W or 100W incandescent bulb. Please see my pictures for details. US shipping and handling is $10, and international is $28. If you have any questions, please ask. Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new power cords, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, new 630v yellow film capacitors at 30 different values, a large variety of transistors for vintage stereo repair, new 250v yellow film crossover capacitors, and more. Just use “add to cart” on everything you want and then check out for combined shipping.
-
Electrophonic Receiver AM/FM8-Track Stereo/Dual Music System T-710CC Phono input
Electrophonic Receiver AM/FM 8-Track Stereo/Dual Music System T-710CC Phono input In very good condition – Play and sound fine – Great sound control with the Bass and treble control – The 8 Track player operate fine and sound is like it should – AM/Fm FM Stetreo ADC Function – Phono input – Great vintage sound and look – Nice illumination – LClean unit – ook at all images for more details Weight: 14 lbs Look at all my other vintage audio and electronics in my store i will combine to reduce shipping fees, bid with confidence you can take a look at my feedback. No duty for USA & Canada Fast shipping & well packed. Will ship worldwide .